Redcar and Cleveland · England
Bath Re-enamelling in Newton Mulgrave
We travel to Newton Mulgrave for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.
- Resurfacing from £350
- Thin, worn enamel in places
- A dull, rough surface that will not come clean
Work for landlords and builders
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
For anyone letting property in or around Newton Mulgrave, we can repair and quote for several addresses together. Send pictures for each one and we will come back with a combined price.
Bath re-enamelling in Newton Mulgrave without replacing anything
If your bath is sound but looks tired, resurfacing is normally the best value. It avoids removal, plumbing and re-tiling. Whether it’s an outdated colour you’d like to change and an original cast iron bath that needs restoring, we can help, whatever the material.
You’re covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before you book.
- Where
- Newton Mulgrave (TS13)
- Area hub
- Redcar and Cleveland
- Guarantee
- One year on every repair
- Price
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Different materials, different repairs
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Covering Newton Mulgrave
Newton Mulgrave is about 7 miles north-west of Whitby, in Redcar and Cleveland. We visit clients in Newton Mulgrave and the surrounding area, so there’s no workshop to go to. Newton Mulgrave is one of 48 places in Redcar and Cleveland where we work. Our nearest city page is Newcastle upon Tyne, about 47 miles away.
Our visits in TS13 work the same way as everywhere else we cover. We also travel to Hinderwell (1 mile north-east), Ellerby (1 mile south-east), Runswick Bay (1 mile east), Port Mulgrave (1 mile north) and Mickleby (2 miles south-east). We also work in nearby towns such as Redcar (13 miles north-west), Guisborough (11 miles west), Eston (15 miles west), Marske-by-the-Sea (10 miles north-west), Grangetown (15 miles west) and Skelton-in-Cleveland (9 miles west).
Near you in Newton Mulgrave
In Newton Mulgrave, that means homes near The Brown Cow pub, Oakridge Community Primary School and Church of St Hilda, among other places. Other landmarks nearby include Mulgrave Castle (4 miles south-east) and Staithes Museum (2.1 miles north). The countryside around Newton Mulgrave includes Danby Beacon.
Should I try a DIY kit first?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
What bath re-enamelling costs
Prices start from £350. We charge the same across the UK, including Newton Mulgrave. What changes the price is:
- How many items we do on one visit
- Where the damage is and how we get to it
- Any earlier repairs that need removing first
- The type of damage
What it costs depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. You get a fixed quote from your photos, so there are no surprises on the day.
Send pictures for a quote
Photographing the damage takes a minute. Please include:
- Daylight if possible, and no flash reflection
- A wider photo showing the whole bath
- Any details about the material
- Where you are, by postcode
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them to us. You will get a fixed price, not an estimate.
The process
The work is clean and fairly quiet, so you can carry on at home. Protection goes down first, then the work takes a full day. Before we leave, we explain the curing time and the aftercare.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Ensure the area is dry
- Have a window or extractor fan available
- Tell us about any previous repairs or coatings
Getting a price
You do not need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Advice
When to call us in Newton Mulgrave
Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. After years of use, the surface becomes porous and stains easily.
Typical reasons for a call-out include:
- Several chips and rust patches
- A coloured bath you want in white
- A bath that stays dull however much you clean it
- A peeling or bubbling previous coating
What your quote should include
- How soon you can use it again
- How the room is protected while they work
- What the guarantee covers, and for how long
- How changes to the job are handled
Towns and villages near Newton Mulgrave
Other services in Newton Mulgrave
Common questions in Newton Mulgrave
Will the price change on the day?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
Do you come to Newton Mulgrave?
Yes. We cover the entire UK and come to Newton Mulgrave and the rest of Redcar and Cleveland. Send pictures and we’ll quote, or call 0345 017 0787.
Does someone need to be in?
We need someone to let us in. You do not need to watch us work.
Will the bath be moved?
No. We resurface it in place, so nothing else is disturbed.
Can you make a coloured bath white?
Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.
Will it make a mess?
No. The work area is masked and covered, and we take our waste away with us.
Is it safe with children and pets around?
Please keep children and pets out of the room during the visit and until it has cured. Everywhere else in the home is fine.
How durable is a resurfaced bath?
A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.
Keeping it looking good
Simple care helps the repair last. We recommend:
- Never use suction bath mats
- Respect the curing time we give you
- Fix dripping taps quickly
- Get any chip repaired quickly
The first few days matter most: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further and makes resurfacing more work.
When a repair isn’t the answer
Not everything can be repaired, and we will tell you before we start. We cannot fix:
- A bath split right through the body
- Anything hidden under an old coating, until we remove it
- Plumbing leaks, which need a plumber
Send us pictures and we’ll tell you honestly before booking.
Surfaces we repair
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
About our accreditations · Every repair comes with a one-year guarantee.
