Clackmannanshire · Scotland
Bath Re-enamelling in Powmill
Bath re-enamelling in Powmill without the cost of replacing. Get a fixed quote from your photos, then we come to you.
- Resurfacing from £350
- Wear marks under the taps
- Enamel that is lost its shine and feels rough
Landlords, agents and businesses in Powmill
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
We work for landlords, letting agents and housing providers in Powmill as well as homeowners. A repair between tenants keeps the property empty for less time, and it usually costs far less than a refit.
How we handle bath re-enamelling in Powmill
We do not move the bath, so your taps, tiles and plumbing are left alone. It typically takes one visit, with the bath ready to use the following day. Whether it’s a roll-top that’s seen better days and wear marks under the taps, we can help, whatever the material.
The work is guaranteed for twelve months. If something is not right in that time, we come back and put it right.
- Area
- Powmill (FK14)
- Region
- Clackmannanshire
- Warranty
- A year, on every repair
- Price
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Honest limits
A repair is not always the answer, and we will tell you before we start. We cannot fix:
- A cast iron or steel bath that is cracked right through
- Leaks from fittings rather than the bath
- A poorly supported acrylic bath, until it’s firmed up
If in doubt, send photos and we’ll say what we think.
Surfaces we repair
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
What we do, step by step
You do not need to empty the room beforehand. We bring everything we need with us, put protection down and get going once we have agreed what we’re doing. It generally takes the best part of a day, and you can get on with other things while we’re there.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s normally ready the next day.
Before we arrive
- Tell us about any previous repairs or coatings
- Have a window or extractor fan available
- Point us to the nearest place to park
Getting a price
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through.
Read more
Repair or replace in Powmill?
Getting a cast iron bath out is hard work: it’s very heavy, may need breaking up, and the replacement can be costly. Re-enamelling avoids all of it. Prices start from £350. The price depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. We give a fixed quote from your photos, so you know the cost before you book.
Why book with us
- Technicians who travel to you, UK-wide
- Colour mixed on the day to match
- A year’s guarantee on all work
- A fixed quote before booking
Take a look at our pricing or bath cost comparison.
How we price bath re-enamelling
Prices start from £350. You will know the full cost before booking. We take into account:
- Where the damage is and how we get to it
- How many items we do on one visit
- How hard the colour is to match
- Any earlier repairs that need removing first
Our prices are the same across the UK, with no extra for Powmill. The job itself decides the price: the material, the amount of damage and how many items.
Send photos for a quote
Before you send pictures, a few simple things make all the difference:
- The material, if you know it
- Natural light rather than flash
- One sharp close-up of the damage
- A coin or ruler next to the damage for scale
Email us photos of the damage and one of the whole item, and tell us you’re in Powmill, and we will come back with a fixed quote.
Places near Powmill
Other services in Powmill
Covering Powmill
Powmill is about 9 miles east of Alloa, in Clackmannanshire. Across the FK14 area, we carry out the work at your property. Powmill is one of 16 places in Clackmannanshire where we work. You can also see our page for Edinburgh, about 21 miles away.
Our visits in FK14 work the same way as everywhere else we cover. From Gartwhinzean Road, Mossend Green and Mill Gardens or a nearby road, a technician can come to you. Being close to the A977, Powmill is easy for our technicians to reach. If you’re just outside Powmill, we cover Rumbling Bridge (1 mile north), Crook of Devon (1 mile north-east), Pool of Muckhart (2 miles north-west), Blairingone (2 miles west) and Dollar (3 miles west). Larger places within reach include Alloa (9 miles west), Tullibody (10 miles west), Tillicoultry (6 miles west), Kincardine (9 miles south-west), Alva (9 miles west) and Clackmannan (8 miles south-west).
Near you in Powmill
A little further out are Killernie Castle (3.6 miles south). Green spaces nearby include Loch Glow and Innerdownie.
Common questions in Powmill
Can you fix a peeling bath coating?
In most cases. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
Do you resurface freestanding baths?
Yes. Inside and out if you’d like.
Will the new finish last?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.
Can pets and children be at home?
We ask you to keep children and pets out of the room while we work. The rest of the house is unaffected.
Is my repair covered?
Every repair comes with our one-year guarantee. We will explain what it covers when we quote.
What areas do you cover?
Across the UK, so Powmill is covered. Our prices are the same everywhere.
Will the price change on the day?
We will show you and explain before doing anything extra. Nothing extra is done without your say-so.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Signs you need bath re-enamelling in Powmill
In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.
If you can see any of these, send us a photo:
- Enamel that is lost its shine and feels rough
- A bath in a colour that no longer suits
- An original cast iron bath that needs restoring
- Chips and rust in more than one place
What your quote should include
- A fixed price, and whether VAT is included
- How long it needs to cure
- Whether a trained technician does the job
- How your room will be protected
Can I fix it myself?
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
Aftercare tips
To keep it looking its best:
- Repair dripping taps early
- Wipe the bath dry after use in hard water areas
- Have chips seen to early
- Avoid suction-cup mats
Stick to mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.
Rust spots on a worn bath get worse with time. It’s simpler to resurface before they spread.
About our accreditations · Every repair comes with a one-year guarantee.
