Suffolk · England

Bath re-enamelling & resurfacing in Ravenswood, Suffolk

Damaged bath in Ravenswood? We put it right where it is, mix the colour on the day and guarantee the work for a year.

  • Resurfacing from £350
  • A period or roll-top bath worth keeping
  • Enamel that’s lost its shine and feels rough
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling for Ravenswood homes

Why repair rather than replace?

A replacement often means several trades over several days. Resurfacing takes one technician and generally a day, and the bath is usable the day after. Our bath re-enamelling starts from £350. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.

What you get with us

  • A year’s guarantee on all work
  • We leave the room as we found it
  • A fixed quote before you book
  • Everything repaired in place

See our full price list and resurfacing vs replacement cost guide.

Bath re-enamelling at your home in Ravenswood

Resurfacing renews the entire surface of the bath without taking anything out. It suits baths that are dull, stained, rough or chipped all over. Typical jobs include staining under the taps and around the waste and an original cast iron bath that needs restoring, on basins & shower trays, cast iron baths and acrylic baths.

You are covered for a year from the day of the repair. Just call us if there is a problem and we will come back.

Surface Doctor technician refinishing the outside of a roll-top bath
Where
Ravenswood (IP3, IP10, IP5)
Region
Suffolk
Guarantee
A year, on every repair
Quotes
From £350. Fixed and free, based on pictures
Call
0345 017 0787
Page updated
23 October 2026

Landlord and trade work in Ravenswood

For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.

We work for landlords, letting agents and housing providers in Ravenswood as well as homeowners. Repairing between tenancies keeps void periods short, and it normally costs far less than a refit.

How it works

On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job typically takes the best part of a day. We clean up when we’re done and let you know when you can use it again.

  1. First we look the bath over and confirm the finish.
  2. Taps, tiles and the floor are masked off.
  3. The bath is degreased, repaired and keyed.
  4. Primer and finish coats are applied.
  5. We remove the masking, tidy up and give you the curing time.

Getting ready for the visit

  • Let us know about parking or access
  • Let us know if it has been repaired before
  • Point us to the nearest place to park

How to get a price

We price from photos so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through.

Send photos for a quote

Advice

DIY repairs versus a professional job

You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.

Do you need bath re-enamelling in Ravenswood?

Often the bath has just had decades of use, and only the surface is worn. The body of the bath is usually perfectly sound.

Keep an eye out for any of the following:

  • A coloured bath you want in white
  • Several chips and rust patches
  • An original cast iron bath that needs restoring
  • A coating lifting around the plughole

Before you book anyone

  • Who will actually do the work
  • How soon you can use it again
  • The length of the guarantee and what it covers
  • Whether the colour is mixed to match

Our hiring checklist

What affects the price in Ravenswood

Prices start from £350. You’ll know the full cost before you book. We look at:

  • How easy the damage is to reach
  • Doing more than one item at once
  • What kind of damage it is
  • Whether old repairs or coatings need taking off

Instead of hourly rates, we price the entire job up front. It depends on the damage, the material and access, and doing several items at once reduces it.

Getting a price from pictures

It only takes a minute to photograph the damage. Try to send:

  • Details of any past repairs
  • A picture taken from further back
  • Natural light rather than flash
  • A close-up of the damage, in focus

The quickest way to a price is to send a couple of photos using our quote form or call us. We’ll say straight away whether it can be repaired.

What your bath is made of matters

Pressed steel

Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.

Acrylic

We resurface acrylic baths as well, with a coating system suited to acrylic. It must be solid and not flex underfoot for the finish to last.

Ravenswood questions

Can you re-enamel a roll-top bath?

Yes. Inside and out if you’d like.

Do you charge for travel?

Travel is included in the price, and we charge the same wherever you are.

Can I get a quote without a visit?

Typically, yes. A close-up and a wider photo are enough to give a fixed price.

What happens if you find more damage?

Your quote covers the damage in the photos. If there is more, we will tell you before starting.

How do I book?

Just pictures, your postcode and a contact number. On the day, access to the room.

Is there a smell?

A little, during the work. Ventilation keeps it down, and it fades as the finish cures.

Are you accredited?

We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

Is it OK to have pets in the house?

Please keep children and pets out of the room during the visit and until it has cured. Everywhere else in the home is fine.

Ravenswood and the surrounding area

Ravenswood is about 2 miles south-east of Ipswich, in Suffolk. Wherever you are in the IP3 postcode area, we come to you. We cover all 731 towns and villages in Suffolk, from the larger towns to small villages. Our nearest city page is London, about 66 miles away.

Every address in IP3, IP10 and IP5 is covered, from the main roads to the quietest streets. Jobs here include addresses on Cody Road, Scott Road and Boyton Road. Neighbouring places we cover include Priory Heath (1 mile north), Racecourse (1 mile north), Rose Hill (2 miles north), Woolverstone (2 miles south) and California (2 miles north). We also work in nearby towns such as Felixstowe (8 miles south-east), Stowmarket (14 miles north-west), Kesgrave (3 miles north-east), Woodbridge (7 miles north-east), Hadleigh (10 miles west) and Needham Market (11 miles north-west).

Around Ravenswood

Typical jobs here are in homes near The Raven pub, Ipswich Academy and Ravenswood Community Primary School and the streets around them. Nearby too are Orwell Country Park (0.8 miles west) and Landseer Road Methodist Church (0.7 miles north-west). Ravenswood’s nearest station is Derby Road station, about 1.6 miles north. Nearby you will also find St Clement's Hospital (1.5 miles north) and Ipswich Castle (2.7 miles north-west). For a walk, there’s Alton Water and Levington Lagoon.

  • Parks and local facilities nearby include Ipswich St Mary Stoke (2.7 miles north-west)
Map of Ravenswood © OpenStreetMap contributors

Honest limits

Some jobs aren’t right for a repair, for example:

  • Leaking taps or wastes (a plumber’s job)
  • A poorly supported acrylic bath, until it’s firmed up
  • A metal bath with a through crack

If in doubt, send photos and we’ll say what we think.

Surfaces we repair

  • Pressed steel baths
  • Acrylic baths
  • Cast iron baths
  • Victorian roll-tops
  • Basins & shower trays
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.