Bath and North East Somerset · England
Bath re-enamelling & resurfacing in Redhill, Bath and North East Somerset
Full bath re-enamelling and resurfacing for householders, landlords and businesses in Redhill. Send pictures for a free, fixed quote.
- Resurfacing from £350
- Worn patches where water runs and sits
- Chips and rust in more than one place
About our bath re-enamelling in Redhill
Re-enamelling works especially well on cast iron and steel, and we can resurface acrylic baths as well. The result is a smooth, even, glossy finish. Whether it’s staining under the taps and around the waste and a bath in a colour that no longer suits, we can typically put it right, on Victorian roll-tops, cast iron baths and acrylic baths alike.
Big or small, it’s backed by a one-year guarantee in Redhill and across Bath and North East Somerset.
- Where
- Redhill (BS40)
- Region
- Bath and North East Somerset
- Cover
- One year on every repair
- Quote
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
When a repair isn’t the answer
Not everything can be repaired, and we will tell you before we start. Repairs won’t solve:
- An acrylic bath that flexes badly underfoot
- Plumbing leaks, which need a plumber
- A metal bath with a through crack
Send us pictures and we’ll tell you honestly.
What we work on
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
What happens on the day
We work cleanly and quietly, so you can carry on at home. Protection goes down first, then the job itself takes a full day. Before we leave, we explain the curing time and the aftercare.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Preparing for the visit
- Have somewhere for us to park nearby if possible
- Tell us if there are stairs or a lift
- Mention any parking restrictions or tricky access
How to get a price
Send us a photo of the damage and a wider shot of the entire item, and tell us you’re in Redhill, and we’ll reply with a fixed price.
Read more
Landlord and trade work in Redhill
We carry out planned and one-off repairs for housing associations and facilities teams in Bath and North East Somerset and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
We are used to working with agents and managing companies. Just send photos, the address and how to get access and we will handle the rest.
Our work in Redhill
Redhill is about 5 miles south of Nailsea, in Bath and North East Somerset. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Redhill is one of 136 towns and villages in Bath and North East Somerset where we work.
Postcode districts we cover here: BS40. Streets in the area include Church Road, Red Hill and The Pound, all of which we cover. We also cover the places around Redhill: Lye Hole (1 mile south), Lye Cross (1 mile south-west), Aldwick (1 mile south), Downside (2 miles north) and Lulsgate Bottom (2 miles north-east). We also work in nearby towns such as Bath (15 miles east), Keynsham (10 miles east), Westmoreland (15 miles east), Kingsmead (15 miles east), Bear Flat (15 miles east) and Lower Weston (15 miles east).
What’s near Redhill
Typical jobs here are in homes near Christ Church. For rail, the closest station is Nailsea & Backwell station, about 3.9 miles north of the centre. A little further out are Barrow Hospital (4.4 miles north-east). Green spaces nearby include Backwell Lake and Cadbury Hill.
Materials and what they mean for the repair
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. It must be solid and not flex underfoot for the finish to last.
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Signs you need bath re-enamelling in Redhill
Previous coatings can fail too, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.
These are the problems we are asked about most:
- Chips and rust in more than one place
- Brown or grey marks that don’t clean off
- Worn patches where water runs and sits
- Enamel that is lost its shine and feels rough
What to look for in a quote
- How long the guarantee is and what it covers
- A fixed quote, and whether VAT is included
- What preparation is included
- Aftercare advice
Redhill: your questions answered
Will the bath be moved?
Not at all. We work on the bath in place, with the room protected and ventilated.
How much does bath re-enamelling cost in Redhill?
Prices start from £350. Every job gets a fixed quote from your pictures. Send a close-up and a picture of the whole item with your BS40 postcode.
Can landlords book you?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses in Redhill.
When can you do it?
It depends on the time of year and where you are. We’ll offer you dates when we send your quote.
What happens once I’ve sent photos?
You get a fixed price and available dates. If anything’s unclear, we will ask for another photo.
Is there any odour?
A little, depending on the job. Ventilation keeps it to a minimum.
What happens if you find more damage?
Your quote covers the damage in the photos. Anything extra is discussed before we begin.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
DIY kit or professional repair?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is generally the cheaper route.
Keeping it looking good
Looking after the surface is easy:
- Stick to gentle, non-abrasive cleaners
- Dry the bath after use to stop limescale
- A dripping tap should be fixed promptly
- Keep suction mats out of the bath
Rinse the bath and wipe it over after use, especially in hard water areas, so limescale cannot build up.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
What else we do in Redhill
What bath re-enamelling costs
Prices start from £350. You’ll know the full cost before booking. We take into account:
- How much damage there is
- Whether we combine several jobs
- The material
- The colour and finish to match
Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Getting a price from photos
The better the pictures, the more accurate the price. Here’s what we find most useful:
- Your postcode, so we can check dates
- Whether it’s been repaired or coated before
- A close-up of the damage, in focus
- The material, if you know it
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, add your postcode and send them over. What comes back is a fixed quote, not a guess.
About our accreditations · Every repair comes with a one-year guarantee.
