Somerset · England
Bath re-enamelling & resurfacing in Rhode, Somerset
Local bath re-enamelling for Rhode: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- A dull, rough surface that won’t come clean
- Stains that will not shift
How we price bath re-enamelling
Resurfacing from £350. Quotes are free and the price is fixed. What we look at:
- How easy the damage is to reach
- Whether it’s a chip, crack, burn or wear
- Any earlier repairs that need removing first
- Unusual colours or finishes
Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
Send pictures for a quote
Before you send photos, these tips help us give you a firm price:
- Natural light rather than flash
- A close-up of the damage, in focus
- Any earlier repairs or coatings
- A picture taken from further back
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can price the job without visiting.
Bath re-enamelling in Rhode, done in place
We do not move the bath, so the taps, tiles and plumbing are not touched. It normally takes one visit, and can be used again the next day. Typical jobs include brown or grey marks that don’t clean off and a bath in a colour that no longer suits, on Victorian roll-tops, acrylic baths and cast iron baths.
Every repair is covered by our one-year guarantee.
- Where
- Rhode (TA5)
- Area hub
- Somerset
- Guarantee
- One year on every repair
- Quotes
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
What we cannot put right
Some problems need a builder, plumber or fitter rather than us:
- Plumbing leaks, which need a plumber
- An acrylic bath that flexes badly underfoot
- A bath that is rusted through
Not sure? Send pictures and we’ll give you a straight answer.
What we work on
- Pressed steel baths
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
Questions from Rhode
Can you do more than one item on the same visit?
Yes, and it’s frequently cheaper. Just add the extra items to your pictures and you’ll get one combined price.
Is it OK to have pets in the house?
On the day, the room should be kept clear of pets and children, mainly so nothing gets touched before it has cured.
It’s been repaired before. Can you still fix it?
In most cases. The old repair comes out first.
How durable is a resurfaced bath?
Care for it and it lasts. Gentle cleaning, no suction mats.
Can you change the colour of my bath?
Yes. Coloured baths can be resurfaced in white, and we can do the rest of the suite as well.
What does bath re-enamelling cost?
Prices start from £350. Every job gets a fixed quote based on photos of the damage. Send a close-up of the damage and a wider photo and your postcode.
Can you re-enamel a roll-top bath?
Yes, often. The inside is resurfaced, and we can refinish the outside as well.
What areas do you cover?
The whole UK, including all of Somerset. Send your postcode with your photos and we will offer you dates.
About Rhode
Rhode is about 2 miles south-west of Bridgwater, in Somerset. Whether you’re in the middle of Rhode or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. Rhode is one of 640 towns and villages in Somerset where we work.
Jobs in TA5 work the same way as everywhere else we cover. Close by, we cover Woolmersdon (1 mile south-east), Durleigh (1 mile north), Compass (1 mile east), Wembdon (2 miles north) and Bridgwater (2 miles north-east). Larger places within reach include Taunton (7 miles south-west), Burnham-on-Sea (9 miles north), Wellington (12 miles south-west), Street (13 miles east), Glastonbury (14 miles east) and Sydenham (3 miles north-east).
Around Rhode
In Rhode, that means homes near Haygrove School and Church of St Hugh and the streets around them. For rail, the closest station is Bridgwater station, roughly 2.4 miles north-east of the centre. Nearby you’ll also find Somerset Brick and Tile Museum (2.4 miles north-east) and Bridgwater Community Hospital (3.5 miles north-east).
Towns and villages near Rhode
What else we do in Rhode
Should you replace it?
Replacing the bath means a plumber, lifting out the old bath, making good the walls and tiles and days without a bathroom. Re-enamelling renews the entire surface without moving it. Our bath re-enamelling starts from £350. The price depends on the type and amount of damage, what it’s made of and how many items we do on one visit. You get a fixed price from your photos, so there are no surprises on the day.
What you get with us
- Fixed prices from your pictures
- Dust sheets down, tidy finish
- Most jobs done in one visit
- Colour-matched on site
See our full price list or resurfacing vs replacement cost guide.
Work for landlords and builders
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
We work for landlords, letting agents and housing providers in Rhode as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Do you need bath re-enamelling in Rhode?
Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. We strip what’s failing and start again.
These are the problems we’re asked about most:
- A bath that stays dull however much you clean it
- A peeling or bubbling previous coating
- Chips and rust in more than one place
- Staining under the taps and around the waste
Comparing quotes
- How to care for the finish
- What the guarantee covers, and for how long
- Whether they match the colour on site
- What preparation is included
How the visit works
Nothing needs to be moved out of the room beforehand. Everything we use comes in the van with us, put protection down and start once you are happy with the plan. Most jobs take a full day, and you’re welcome to carry on with your day while we work.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can generally be used the day after.
Getting ready for the visit
- Clear the area around the damage
- Let us know if it has been repaired before
- Have somewhere for us to park nearby if possible
Getting a price
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.
Related advice
Keeping it looking good
Once the work has cured, treat it gently:
- Fix dripping taps quickly
- Stick to gentle, non-abrasive cleaners
- Leave the bath for the full curing time before using it
- Dry the bath after use to stop limescale
Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Repair dripping taps promptly.
On a worn bath, rust spots keep spreading, and each one adds to the preparation. It’s simpler to resurface before they spread.
Different materials, different repairs
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
About our accreditations · Every repair comes with a one-year guarantee.
