Flintshire · England

Bath re-enamelling & resurfacing in Rockcliffe, Flintshire

Fixed-price bath re-enamelling in Rockcliffe and the surrounding area, done in a single visit in most cases and guaranteed for a year.

  • Resurfacing from £350
  • A coloured bath you want in white
  • A dull, rough surface that will not come clean
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling in Rockcliffe

The process

Expect a friendly, tidy visit. We confirm the time with you beforehand, cover and mask the work area, then carry out the work, which normally takes a full day. If anything looks different from your pictures, we will talk to you before going ahead.

  1. We mask and protect the room and ventilate it.
  2. Next we degrease the bath and fix chips and rust spots.
  3. We prepare the surface and apply a bonding primer.
  4. We spray several coats of new enamel finish.
  5. Once cured, normally by the following day, the bath is ready.

Before we arrive

  • Move bottles, mats and clutter away from the area
  • Have somewhere for us to park nearby if possible
  • Tell us if there are stairs or a lift

Getting a price

Upload photos of the damage and one of the whole item, with your CH6 postcode, and we will reply with a fixed quote.

Send photos for a quote

Read more

Bath re-enamelling in Rockcliffe without replacing anything

After cleaning, repairing and priming, we spray on the new finish. Most of the work, and most of the durability, is in the preparation, and we take our time over it. If you are dealing with a period or roll-top bath worth keeping and several chips and rust patches, we can help.

We guarantee the work for a year. If something isn’t right in that time, we come back and put it right.

Area
Rockcliffe (CH6)
Area hub
Flintshire
Warranty
12 months on all our work
Quotes
From £350. Fixed and free, based on photos
Telephone
0345 017 0787
Updated
23 October 2026
Technician in a mask working on a freestanding roll-top bath

Signs you need bath re-enamelling in Rockcliffe

Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. Eventually the surface turns porous and stains.

Most people contact us after spotting one of these:

  • A bath that stays dull however much you clean it
  • Staining under the taps and around the waste
  • A roll-top that is seen better days
  • Worn patches where water runs and sits

What to look for in a quote

  • What protection goes down before work starts
  • What prep work is covered
  • How to look after the finish
  • Who turns up on the day

Our hiring checklist

Our work in Rockcliffe

Rockcliffe is about 2 miles north-west of Connah's Quay, in Flintshire. Across the CH6 area, we carry out the work at your property. Rockcliffe is one of 139 places in Flintshire where we work. Our jobs stretch from Rockcliffe to Liverpool (14 miles away).

Our repair technicians cover all of CH6 and the streets around it. If you’re just outside Rockcliffe, we cover Kelsterton (1 mile south-east), Golftyn (1 mile south-east), Connah's Quay (2 miles south-east), Northop Hall (2 miles south) and Wepre (2 miles south-east). We also work in nearby towns such as Buckley (4 miles south), Bwcle (4 miles south), Saltney (8 miles south-east), Mold (5 miles south-west), Holywell (6 miles north-west) and Lache (8 miles south-east).

What’s near Rockcliffe

We visit homes around Sir Gawain & The Green Knight pub and Connah's Quay High School. For rail, the closest station is Flint station, about 2 miles north-west. Other landmarks nearby include Cae Mount Fieldname (1.8 miles north-west) and Deeside Community Hospital (3 miles south-east). Not far away are Leadbrook and Deeside Nature Reserve.

Map of Rockcliffe © OpenStreetMap contributors

What a repair can’t fix

A few problems are outside what a surface repair can do:

  • Problems we can’t see until an old finish comes off
  • A cast iron or steel bath that is cracked right through
  • Acrylic that moves when you stand in it

If in doubt, send photos and we will say what we think.

Materials we repair

  • Cast iron baths
  • Pressed steel baths
  • Victorian roll-tops
  • Basins & shower trays
  • Acrylic baths

What bath re-enamelling costs

Prices start from £350. Every quote is fixed and free. What we take into account:

  • Access to the area
  • Whether we combine several jobs
  • The size and number of damaged areas
  • What kind of damage it is

A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send photos and you will get a fixed figure.

How to get a fixed price

You can generally get a fixed quote without us visiting. To help us price it:

  • A photo taken from further back
  • Something in shot to show the size
  • One sharp close-up of the damage
  • Details of any past repairs

Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed quote without visiting.

For landlords and businesses

For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.

We’re used to working with agents and managing companies. Just send photos, the address and how to get access and we will handle the rest.

Common questions in Rockcliffe

Does re-enamelling smell?

Yes, while we’re applying the finish. Ventilation keeps it down, and it fades as the finish cures.

What information do you need?

Use the quote form or ring 0345 017 0787.

Can you quote from photos?

Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.

Can you redo someone else’s repair?

Generally, yes. Let us know what was used before and we will plan for it.

How durable is a resurfaced bath?

It depends on preparation, use and care. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.

Do you resurface freestanding baths?

Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.

What if the damage is worse than the pictures show?

The price is fixed for what the pictures show. If there is more, we’ll tell you before starting.

Do the materials smell?

There may be a mild smell during the work.

Can I fix it myself?

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

A DIY attempt is not a disaster. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.

Why repair rather than replace?

Replacing a bath normally involves a plumber, a fitter and a tiler. Re-enamelling takes one technician and normally one day, and the bath can be used the day after. Our bath re-enamelling starts from £350. A repair usually costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.

Why book with us

  • A fixed quote before you book
  • No extra charge for your area
  • Straight answers about what a repair can do
  • Accredited with CHAS, Constructionline and SafeContractor

Read our pricing or bath cost comparison.

What your bath is made of matters

Roll-top and period baths

Freestanding roll-tops can be done inside and out, with the outside refinished as well.

Pressed steel

Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.