Flintshire · England
Bath Re-enamelling for Kelsterton homes
We travel to Kelsterton for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.
- Resurfacing from £350
- A dull, rough surface that won’t come clean
- A peeling or bubbling previous coating
Questions from Kelsterton
Can you repair several things at once?
Yes, and it’s often cheaper. Just add the extra items to your pictures and we’ll quote them together.
Do you come to Kelsterton?
Yes, we do. Technicians travel to Kelsterton from across the region, with no extra charge for travel.
Can I get a quote without a visit?
Normally, yes. Clear pictures let us give you a fixed quote without visiting.
What information do you need?
Use the quote form or ring 0345 017 0787.
Can landlords book you?
Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Can you repair something that’s been repaired before?
Yes, regularly. It can add a little time, which we include in the quote.
Someone resurfaced my bath and it’s peeling. Can you help?
Usually, yes. The old coating comes off before we resurface it. Mention it when you send photos.
Bath re-enamelling at your home in Kelsterton
Re-enamelling works especially well on cast iron and steel, and we can resurface acrylic baths as well. You end up with a smooth, glossy surface. Our repair technicians work on basins & shower trays, acrylic baths and pressed steel baths, and the jobs we see most are a bath that stays dull however much you clean it and wear marks under the taps.
A one-year guarantee comes as standard, so you are not left on your own once we’ve gone.
- Where
- Kelsterton (CH5, CH6)
- County
- Flintshire
- Guarantee
- A year, on every repair
- Quote
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Looking after it afterwards
Much of the damage we repair could have been avoided. These habits help:
- Wipe the bath dry after use in hard water areas
- Do not leave bottles, razors or sponges standing on the surface
- Avoid suction-cup mats
- Do not let dyes or oils sit on the finish
Dry the bath after use if possible, particularly with hard water, and rinse off any bath products.
Leave a peeling coating alone. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
DIY repairs versus a professional job
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
What we are called out for in Kelsterton
The gloss on enamel is thin, and abrasive cleaning slowly wears it away. Eventually the surface turns porous and stains.
People normally call us after spotting something like this:
- Thin, worn enamel in places
- A peeling or bubbling previous coating
- A coloured bath you want in white
- Staining under the taps and around the waste
What your quote should include
- How the colour is matched
- Whether the price is fixed and includes VAT
- How long it needs to cure
- How long the guarantee is and what it covers
Where we work around Kelsterton
Kelsterton is about 1 mile north-west of Connah's Quay, in Flintshire. Book a date that suits you, and we will give you an arrival time in advance, so there is no waiting around. We work in 139 places across Flintshire. Our jobs stretch from Kelsterton to Liverpool (14 miles away).
Jobs in CH5 and CH6 work the same way as everywhere else we cover. Whether you live on York Road, Cooper's Lane and Kelsterton Road or a nearby road, a technician can come to you. Nearby, we also work in Rockcliffe (1 mile north-west), Golftyn (1 mile south-east), Connah's Quay (1 mile south-east), Wepre (2 miles south-east) and Northop Hall (2 miles south). Further out, we also cover Buckley (4 miles south), Bwcle (4 miles south), Saltney (7 miles south-east), Mold (5 miles south-west), Holywell (7 miles north-west) and Lache (8 miles south-east).
Near you in Kelsterton
We visit homes around Sir Gawain & The Green Knight pub, Golftyn Chapel and Wepre Park and the streets around them. Also close by are Golftyn C.P. School (0.7 miles south-east) and Connah's Quay High School (less than half a mile south). Kelsterton’s nearest station is Shotton station, roughly 2.1 miles south-east of the centre. Nearby you will also find Deeside Community Hospital (2.5 miles south-east) and Ewloe Castle (2.1 miles south). The countryside around Kelsterton includes Flint Mountain and Deeside Nature Reserve.
Also near Kelsterton
Other services in Kelsterton
How it works
We turn up when we said we would and looks over the damage before anything else. Dust sheets and masking tape go down before we open a single tin. The work itself takes a full day, and the room is left clean and tidy.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures.
How to prepare
- Open a window if you can
- Mention if the room is upstairs or in a flat
- Plan for the room to be out of bounds to pets and children
Getting a price
Send us a photo of the damage and one of the entire item, with your CH5 postcode, and we will reply with a fixed quote.
Advice
Different materials, different repairs
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
What bath re-enamelling costs
Resurfacing from £350. There are no hourly rates or hidden extras. The price depends on:
- The type of damage
- How many items we do on one visit
- Whether old repairs or coatings need taking off
- The material and finish
We charge the same wherever you are, so there’s no premium for Kelsterton. The job itself decides the price: how much damage, what it’s made of and how many items.
How to get a fixed price
Almost every job we do is priced from pictures. This is what to send:
- A wider photo showing the whole bath
- The postcode, so we can plan the visit
- The material, if you know it
- Good light, ideally daylight, without flash glare
If you’re in Kelsterton and want a price, the easiest route is pictures: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.
Work for landlords and builders
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
We work for landlords, letting agents and housing providers in Kelsterton as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
When a repair isn’t the answer
To be straight with you, some problems need a different fix:
- A cast iron or steel bath that’s cracked right through
- Leaks from fittings rather than the bath
- Acrylic that moves when you stand in it
If in doubt, send photos and we will say what we think.
Materials we work on in Kelsterton
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
- Acrylic baths
About our accreditations · Every repair comes with a one-year guarantee.
