Flintshire · England

Bath Re-enamelling in Wepre

Full bath re-enamelling and resurfacing in Wepre, carried out at your home and guaranteed for a year.

  • Resurfacing from £350
  • Stains that will not shift
  • A bath in a colour that no longer suits
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath re-enamelling in Wepre

About our bath re-enamelling in Wepre

Cast iron and steel baths are ideal for re-enamelling, and acrylic baths can be resurfaced too. You end up with a smooth, glossy surface. If you are dealing with stains that won’t shift and thin, worn enamel in places, we can normally put it right, on acrylic baths, basins & shower trays and Victorian roll-tops alike.

All of our repairs are guaranteed for twelve months in Wepre and everywhere else. We return to put right any problem with the work.

Roll-top bath being refinished by a Surface Doctor technician
Where
Wepre (CH5)
Region
Flintshire
Guarantee
12 months on all our work
Quote
From £350. Free and fixed, from your photos
Phone
0345 017 0787
Updated
23 October 2026

Common questions in Wepre

Can you quote from photos?

Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.

Are you a vetted contractor?

Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

How long does re-enamelling last?

Care for it and it lasts. Avoid abrasive cleaners and suction mats.

Can you make a coloured bath white?

Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.

Can I add another job to the visit?

Yes. Doing several items on one visit usually costs less than separate visits. Include photos of each item.

Can tenants book a repair?

We can work for tenants, landlords or agents. Get your landlord’s agreement first.

Do you charge for travel?

Travel is included in the price, and we charge the same wherever you are.

Do you work for landlords and businesses?

Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.

Aftercare tips

Most damage we see is avoidable. These habits help:

  • Leave the bath for the full curing time before using it
  • Rinse off hair dye, oils and bath bombs immediately
  • Repair dripping taps early
  • Dry the bath after use to stop limescale

A quick rinse and wipe after use helps, especially in hard water areas, to stop limescale building up.

Rust spots on a worn bath get worse with time. Resurfacing before they spread keeps it simpler.

The process

We agree an arrival time beforehand, so you know when to expect us. Once we’re there, the work takes a full day for most jobs. The room is left tidy.

  1. We check the bath and agree the finish with you.
  2. Everything around the bath is masked and covered.
  3. We degrease the bath, fix any damage and key the surface.
  4. Primer and finish coats are applied.
  5. We remove the masking, tidy up and give you the curing time.

Getting ready for the visit

  • Keep children and pets away from the room on the day
  • Let us know about parking or access
  • Have a window or extractor fan available

Getting a price

Send us pictures of the damage and a wider shot of the entire item, with your CH5 postcode, and we will reply with a fixed quote.

Get a free quote

Advice

Honest limits

Before you book, it’s worth knowing the limits too:

  • A cast iron or steel bath that is cracked right through
  • Steel that has corroded right through
  • Leaks from fittings rather than the bath

Not sure? Send pictures and we’ll give you a straight answer before you book.

Surfaces we repair

  • Victorian roll-tops
  • Acrylic baths
  • Basins & shower trays
  • Cast iron baths
  • Pressed steel baths

Repairs by material

Acrylic

Acrylic baths can be resurfaced too, with a coating system suited to acrylic. It must be solid and not flex underfoot.

Roll-top and period baths

Freestanding roll-tops can be done inside and out, and the outside can be refinished too.

Our work in Wepre

Wepre is about 1 mile east of Connah's Quay, in Flintshire. Customers in Wepre get the same service as everywhere else we cover: a fixed quote from your pictures, and a technician at your door on the day. We cover 139 places in Flintshire. You can also see our page for Liverpool, about 14 miles away.

We work across CH5. You’ll find streets such as Dee Road, Fron Road and Mill Lane, all of which we cover. If you are just outside Wepre, we cover Shotton (1 mile south-east), Higher Shotton (1 mile south), Connah's Quay (1 mile west), Golftyn (1 mile north-west) and Queensferry (1 mile south-east). Within a short drive, we also cover Buckley (3 miles south-west), Bwcle (3 miles south), Flint (4 miles north-west), Saltney (6 miles south-east), Mold (5 miles south-west) and Holywell (8 miles north-west).

Local landmarks in Wepre

We visit homes around The Castle Inn, John Summers High School and Wepre Park. You’ll also find Ysgol Cae'r Nant (less than half a mile west) and St David's Church (under half a mile west). Wepre has its own railway station: Shotton station. Well-known places in the area include West Saltney (2.5 miles south-east) and Deeside Community Hospital (0.8 miles south). Open spaces near Wepre include Deeside Nature Reserve and Flint Mountain.

Map of Wepre © OpenStreetMap contributors

Should you replace it?

Replacing a bath can take several days across several trades. Re-enamelling is one technician, normally one day, and the bath is usable the day after. Our bath re-enamelling starts from £350. We don’t add extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.

Why Wepre clients choose us

  • One-year guarantee on every repair
  • Colours mixed by hand to suit your surface
  • CHAS, Constructionline and SafeContractor accredited
  • Free fixed quotes from pictures

See our prices page or bath cost comparison.

Signs you need bath re-enamelling in Wepre

In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.

The things clients usually mention when they call include:

  • Wear marks under the taps
  • Staining under the taps and around the waste
  • Several chips and rust patches
  • A bath in a colour that no longer suits

What your quote should include

  • What happens if they find more damage
  • How the room is protected while they work
  • A fixed quote, and whether VAT is included
  • The length of the guarantee and what it covers

Choosing a repair company

For landlords and businesses

We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.

Letting agents often send us pictures straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.

DIY kit or professional repair?

If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.

It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.