Kent · England
Bath Re-enamelling for Ryarsh homes
We travel to Ryarsh for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.
- Resurfacing from £350
- An old resurfacing that is failing
- Wear marks under the taps
Looking after it afterwards
How the surface is treated afterwards matters. Here’s what we suggest:
- Don’t use the bath until it has fully cured
- Fix dripping taps quickly
- Keep suction mats out of the bath
- Clean with a soft cloth and mild detergent
Wipe the bath dry after use where you can, especially in hard water areas, and rinse away any product left on the surface.
On a worn bath, rust spots keep spreading. Resurfacing before they spread keeps it simpler.
Bath re-enamelling in Ryarsh, done in place
Most baths are re-enamelled in a day, and you can use the bath the following day. Nothing is disconnected or removed. We are frequently asked to fix staining under the taps and around the waste and several chips and rust patches, on cast iron baths, Victorian roll-tops and pressed steel baths.
We stand behind the work with a one-year guarantee, so you’re not left on your own once we have gone.
- Location
- Ryarsh (ME19)
- County
- Kent
- Guarantee
- A year, on every repair
- Price
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
When to call us in Ryarsh
Enamel doesn’t fail overnight. Years of cleaning, hard water and hot baths wear the gloss away, generally first under the taps and around the waste.
Typical reasons for a call-out include:
- Worn patches where water runs and sits
- A roll-top that is seen better days
- Staining under the taps and around the waste
- An outdated colour you’d like to change
Comparing quotes
- A fixed quote, and whether VAT is included
- How long it needs to cure
- What preparation is included
- Whether a trained technician does the job
What happens on the day
We begin by going over the job with you. Next, we cover and mask everything nearby and we start. Allow most of the day.
- We mask and protect the room and ventilate it.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- Several coats of new finish are sprayed on.
- We leave it to cure, and it’s generally ready the following day.
Preparing for the visit
- Ensure the area is dry
- Keep a parking space free if you can
- Tell us if there are stairs or a lift
Ask for a price
If you are in Ryarsh and want a price, photos are the quickest way: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Advice
Our work in Ryarsh
Ryarsh is about 7 miles north-west of Maidstone, in Kent. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Our technicians cover all 922 towns and villages across Kent. Our jobs stretch from Ryarsh to London (25 miles away).
Our visits in ME19 work the same way as everywhere else we cover. Whether you live on The Street, Old School Lane and Brick Gardens or anywhere nearby, we can come to you. Nearby, we also work in Addington (1 mile south-west), Trottiscliffe (2 miles west), Vigo Village (2 miles north-west), Harvel (3 miles north-west) and Culverstone Green (3 miles north-west). We also work in nearby towns such as Maidstone (7 miles south-east), Sittingbourne (15 miles east), Dartford (12 miles north-west), Sevenoaks (9 miles west), Royal Tunbridge Wells (13 miles south-west) and Gravesend (8 miles north).
Near you in Ryarsh
Our clients here include homes close to Church of St Martin, The Duke Of Wellington Public House and Leybourne Lakes Country Park and the streets around them. Also close by are Ryarsh Primary School (within half a mile north-east) and The Holmesdale School (2 miles north-east). Ryarsh’s nearest station is West Malling station, about 1.7 miles south-east of the centre. A little further out are Maidstone Hospital (4.7 miles south-east) and Coldrum Long Barrow (1.1 miles north-west). Not far away are Blue Bell Hill and Burham Down.
Repairs by material
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Common questions in Ryarsh
Will the price change on the day?
If we find something the photos didn’t show, we explain it first. The price only changes if you agree.
Is it OK to have pets in the house?
Keep pets and children away from the work area on the day, mainly so nothing gets touched before it has cured.
Do you cover Ryarsh?
We do. Repair technicians travel to Ryarsh from across the region, and the price is the same as everywhere else.
Will there be fumes?
Yes, while we’re applying the finish. We set up ventilation and the smell fades as it cures.
How long is the bath unusable?
Normally a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
Do you cover the whole of Kent?
We cover the whole UK, including Ryarsh and the rest of Kent. Send your postcode with your photos and we will offer you dates.
I’m a tenant. Can you help?
We’re happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
How do I book?
Send photos through the quote form or call 0345 017 0787.
Repair or replace: which is better?
When the bathroom is fine apart from the bath’s finish, re-enamelling is the least disruptive fix. Nothing else is disturbed. Our bath re-enamelling starts from £350. A repair generally costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
Why Ryarsh customers choose us
- Accredited with CHAS, Constructionline and SafeContractor
- A year’s guarantee on all work
- Honest advice, even when it means no job
- Colour mixed on the day to match
Read our prices page or resurfacing vs replacement cost guide.
Prices and what affects them
Prices start from £350. There are no hourly rates or hidden extras. The price depends on:
- Whether it’s a chip, crack, burn or wear
- How many areas need work
- Any earlier repairs that need removing first
- Where the damage is and how we get to it
Compared with replacing, repairing normally costs far less, because there is no removal, plumbing or making good. The quote lists exactly what you’re paying for.
Send pictures for a quote
Two or three clear photos are typically enough. It helps if you send:
- Details of any past repairs
- A wider photo showing the entire bath
- Where you are, by postcode
- A clear, close picture of the problem area
The quickest way to a price is to send two or three pictures using our quote form or call us. We’ll say immediately if a repair is the right fix.
Landlord and trade work in Ryarsh
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
Builders use us to fix snagging damage before handover. Several plots can be done in one visit to keep costs down.
What a repair cannot fix
To be straight with you, some problems need a different fix:
- Anything hidden under an old coating, until we remove it
- Leaking taps or wastes (a plumber’s job)
- Acrylic that moves when you stand in it
If in doubt, send pictures and we will say what we think before you book.
Materials we repair
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
Nearby places to Ryarsh
More services for Ryarsh
About our accreditations · Every repair comes with a one-year guarantee.
