Cambridgeshire · England
Bath re-enamelling & resurfacing in Sawston, Cambridgeshire
Bath re-enamelling for Sawston, without a refit. Get a fixed quote from your photos, then we come to you.
- Resurfacing from £350
- Several chips and rust patches
- A coloured bath you want in white
How it works
Arrival times are agreed in advance, so you are not left guessing. Once we’re there, the work takes a full day. We leave the room clean.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Point us to the nearest place to park
- Mention any earlier repairs or resurfacing
- Let us know about parking or access
Get a quote
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.
Read more
Bath re-enamelling in Sawston, done in place
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. If you are dealing with an old resurfacing that’s failing and staining under the taps and around the waste, we can help.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Area
- Sawston (CB22)
- Area hub
- Cambridgeshire
- Guarantee
- 12 months on all our work
- Quotes
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Sawston questions
How long is the bath unusable?
Generally a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
Will there be fumes?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It clears as the finish cures.
Can you do the outside of a roll-top?
Yes. Inside and out.
How durable is a resurfaced bath?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
How much does bath re-enamelling cost in Sawston?
Prices start from £350. We give a fixed quote from your photos. Send a close-up and a picture of the entire item and your postcode.
Can you resurface a pink bath in white?
Yes. Coloured baths can be resurfaced in white, and we can do the rest of the suite as well.
Can you redo someone else’s repair?
Most of the time. Tell us what was done before.
Do you work in Sawston?
Yes. We cover the entire UK and travel to Sawston. Send pictures and we’ll quote, or call 0345 017 0787.
Our work in Sawston
Sawston is about 6 miles south of Cambridge, in Cambridgeshire. Wherever you are in the CB22 postcode area, a technician comes to you. Sawston is one of 371 towns and villages in Cambridgeshire where we work. We work right across the region, from Sawston to London (45 miles away).
Postcode districts we cover here: CB22. Whether you live on High Street, London Road and Churchfield Avenue or a nearby road, a technician can come to you. Neighbouring places we cover include Pampisford (1 mile south-east), Whittlesford (1 mile south-west), Stapleford (2 miles north-west), Hanley Grange (2 miles south-east) and Little Shelford (2 miles north-west). Within a short drive, we also cover Cambridge (6 miles north), Newmarket (13 miles north-east), Royston (10 miles south-west), Cambourne (12 miles north-west), King's Hedges (7 miles north) and Arbury (7 miles north).
Landmarks near Sawston
Our customers here include homes close to Sawston Village College, Kings Head Public House and The Bellbird Primary School and the streets around them. The nearest railway station is Whittlesford Parkway station, about 1.5 miles south. Nearby you’ll also find Fowlmere Castle (4.7 miles south-west) and American Air Museum (3 miles south-west). Open spaces near Sawston include Little Trees Hill and Beechwoods nature reserve.
Materials and what they mean for the repair
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Repair or replace: which is better?
Replacing a bath usually involves a plumber, a fitter and a tiler. Resurfacing is one technician, normally in a day, and the bath can be used the day after. Our bath re-enamelling starts from £350. We charge the same wherever you are, with no extra for Sawston. What changes the price is the job itself: the material, the amount of damage and how many items.
Why book with us
- Dust sheets down, tidy finish
- Same prices wherever you are
- One-year guarantee on every repair
- Fixed prices from your photos
See our prices page or bath cost comparison.
Should I try a DIY kit first?
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
For landlords and businesses
We regularly work with letting and managing agents. Send the address, pictures and access details.
For developers and builders, we fix damage before handover. Several plots can be done in one visit.
What we can’t put right
A repair isn’t always the answer, and we’ll tell you before we start. We can’t fix:
- A bath split right through the body
- Damage hidden under a previous coating, until it’s stripped back
- A bath that’s rusted through
Not sure? Send photos and we’ll give you a straight answer.
What we work on
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
- Cast iron baths
- Pressed steel baths
What we’re called out for in Sawston
Enamel wears gradually. Abrasive cleaners, limescale and years of use dull the surface, starting where water runs and sits.
Typical reasons for a call-out include:
- An original cast iron bath that needs restoring
- A coating lifting around the plughole
- A bath that stays dull however much you clean it
- A bath in a colour that no longer suits
What to look for in a quote
- How to look after the finish
- Whether a trained technician does the job
- How the room is protected while they work
- What preparation is included
Towns and villages near Sawston
Other services in Sawston
Looking after it afterwards
Nothing complicated is needed, just a few sensible habits:
- Clean with a soft cloth and mild detergent
- A dripping tap should be fixed promptly
- Get any chip repaired quickly
- Dry the bath after use to stop limescale
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.
Don’t try to scrub a worn bath back to shine. It removes more of the surface and makes resurfacing more work.
About our accreditations · Every repair comes with a one-year guarantee.
