Liverpool · England
Bath Re-enamelling for Seacombe homes
Full bath re-enamelling and resurfacing for homeowners, landlords and businesses in Seacombe. Send pictures for a free, fixed quote.
- Resurfacing from £350
- An outdated colour you’d like to change
- Staining under the taps and around the waste
How we handle bath re-enamelling in Seacombe
When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. It avoids removal, plumbing and re-tiling. We work on acrylic baths, Victorian roll-tops and basins & shower trays, and common reasons people get in touch are a peeling or bubbling previous coating and wear marks under the taps.
All of our repairs are guaranteed for twelve months in Seacombe and everywhere else. If something goes wrong with the work, we come back.
- Area
- Seacombe (CH44, CH41, CH27)
- County
- Liverpool
- Warranty
- One year on every repair
- Quote
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
For landlords and businesses
Landlords, letting agents and housing providers in Seacombe use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it normally costs far less than a refit.
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
The process
When we visit, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. The job generally takes most of the day. We tidy up before we leave and tell you when it’s ready to use.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the following day.
How to prepare
- Avoid using the area for a few hours before we arrive
- Keep a parking space free if you can
- Keep pets and children out of the room while we work
Getting a price
You don’t need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Related advice
Materials and what they mean for the repair
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is the part we put right.
Should I try a DIY kit first?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
Do you need bath re-enamelling in Seacombe?
Once enamel loses its gloss, it stains more easily, and cleaning harder only makes it worse. That is the point where re-enamelling makes sense.
People normally call us when they notice one of these:
- A bath in a colour that no longer suits
- A coating lifting around the plughole
- Chips and rust in more than one place
- Wear marks under the taps
What your quote should include
- What happens if the damage is worse than the photos show
- How long it needs to cure
- What protection goes down before work starts
- A fixed price, and whether VAT is included
What else we do in Seacombe
What bath re-enamelling costs
Resurfacing from £350. Each job gets its own fixed quote. This is what makes a difference:
- Where the damage is and how we get to it
- The material and finish
- Unusual colours or finishes
- The type of damage
No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
Send pictures for a quote
It only takes a minute to photograph the damage, and it saves a visit. Please include:
- Any details about the material
- Whether it’s been repaired or coated before
- One sharp close-up of the damage
- A wider photo showing the entire bath
The quickest way to a price is to send two or three pictures through our quote form or call us. We’ll say right away whether it can be repaired.
When we would advise against a repair
In fairness, there are a few things a repair will not fix:
- A metal bath with a through crack
- Anything hidden under an old coating, until we remove it
- Acrylic that moves when you stand in it
Send us photos and we will tell you honestly before you book.
Materials we work on in Seacombe
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
- Cast iron baths
Looking after it afterwards
Nothing complicated is needed:
- Do not use the bath until it has fully cured
- Never use suction bath mats
- Don’t leave a chip unrepaired
- Wash away dyes and oils after use
Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.
On a worn bath, rust spots keep spreading and make the job bigger. It’s simpler to resurface before they spread.
Seacombe and the surrounding area
Seacombe is about 1 mile south-east of Wallasey, in Liverpool. From the centre of Seacombe to the outlying streets, the service is the same: a fixed price, a tidy visit and a guarantee. We work in 52 places across Liverpool.
We cover every part of CH44, CH41 and CH27. Streets in the area include Dock Road, Bell Road and Park Road. You will find Seacombe on the A59 and A5027, which makes it straightforward to reach. If you are just outside Seacombe, we cover Poulton (1 mile west), Wallasey (1 mile north-west), Egremont (1 mile north), Wallasey Village (2 miles north-west) and Bidston (2 miles west). Within a short drive, we also cover Liverpool (4 miles east), Crosby (5 miles north), Everton (3 miles east), Orrell (4 miles north), Brighton-le-Sands (5 miles north) and Wavertree (4 miles east). As one of the bigger places in Liverpool, Seacombe sees plenty of our work.
Near you in Seacombe
Typical jobs here are in homes near The Mona Castle pub, Church of Our Lady Star of the Sea and Central Park and the streets around them. Nearby too are Weatherhead High School (1.2 miles west), Kingsway Primary School (under half a mile north-west) and Liscard School of Science and Art (0.6 miles north-west). For rail, the closest station is Birkenhead Park station, about 0.9 miles south-west. Nearby you will also find Museum of Printing (1.2 miles south-east) and St Paul's (1.4 miles east). Green spaces nearby include New Ferry Butterfly Park and Bidston Hill.
Common questions in Seacombe
Can you fix a peeling bath coating?
Yes. Removing the old finish takes extra time, which we include in the price.
How durable is a resurfaced bath?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.
Do I need to be at home?
Yes. We need access to the room while we work, at a time that suits you.
I’m a tenant. Can you help?
We’re happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
Do you charge for travel?
There’s no separate call-out charge. The fixed quote covers the visit and the work.
Can I get a quote without a visit?
In nearly every case. If pictures don’t show enough, we’ll ask for another angle.
What information do you need?
Send photos through the quote form or call 0345 017 0787, and we will take it from there.
Will there be fumes?
Some odour is normal while we spray, which is why we ventilate the bathroom. It fades as the coating cures.
About our accreditations · Every repair comes with a one-year guarantee.
