Wirral · England
Bath re-enamelling & resurfacing in Leasowe, Wirral
Full bath re-enamelling and resurfacing at your home in Leasowe, with a one-year guarantee on every repair.
- Resurfacing from £350
- A peeling or bubbling previous coating
- A dull, rough surface that will not come clean
Questions from Leasowe
Is a repair better than a new one?
Generally, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we’ll tell you.
How do I get a price for bath re-enamelling in Leasowe?
Prices start from £350. Because every job differs, we price from photos. You know the full cost before anything is booked.
How soon can you come?
That depends on our diary for your area. Send photos with your postcode and we’ll reply with the earliest dates.
Do you charge for travel?
We don’t add a call-out fee. Your fixed quote includes everything.
Is the work guaranteed?
Yes, for a year. If there is a problem with the work in that time, we come back and put it right.
Will you leave a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
How durable is a resurfaced bath?
It depends on preparation, use and care. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.
Can you redo someone else’s repair?
Generally, yes. Let us know what was used before and we will plan for it.
Bath re-enamelling in Leasowe without replacing anything
The bath stays where it is, so the taps, tiles and plumbing are not touched. It typically takes one visit, with the bath ready to use the following day. Whether it’s a bath that stays dull however much you clean it and thin, worn enamel in places, we can help, on basins & shower trays, Victorian roll-tops and acrylic baths alike.
Big or small, it’s backed by a one-year guarantee.
- Area
- Leasowe (CH46, CH45, CH44)
- County
- Wirral
- Cover
- 12 months on all our work
- Quotes
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Looking after it afterwards
To keep it looking its best for years:
- Do not let dyes or oils sit on the finish
- A dripping tap should be fixed promptly
- Keep suction mats out of the bath
- Get any chip repaired quickly
Wipe the bath dry after use where you can, particularly with hard water, and rinse away any product left on the surface.
If a previous coating is starting to peel, don’t pick at it. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
Can I fix it myself?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
Honest limits
A repair isn’t right for every job, including:
- Acrylic that moves when you stand in it
- Leaks from fittings rather than the bath
- Anything hidden under an old coating, until we remove it
If in doubt, send pictures and we’ll say what we think.
Materials we work on in Leasowe
- Cast iron baths
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
What your bath is made of matters
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
When to call us in Leasowe
Frequently the bath has just had decades of use, with nothing wrong except the surface. The body of the bath is usually perfectly sound.
If you can see any of these, send us a picture:
- Thin, worn enamel in places
- A dull, rough surface that will not come clean
- Stains that will not shift
- A bath in a colour that no longer suits
Questions to ask before booking
- A fixed quote, and whether VAT is included
- Whether a trained technician does the job
- Whether the colour is mixed to match
- If travel is included in the price
Our work in Leasowe
Leasowe is about 1 mile north-east of Moreton, in Wirral. Whether you’re in the middle of Leasowe or on the outskirts, the service is the same: a fixed quote, a tidy visit and a guarantee. Our technicians cover 44 places in Wirral, from the larger towns to small villages. Our nearest city page is Liverpool, about 7 miles away.
Postcode districts we cover here: CH46, CH45 and CH44. That includes homes on Reeds Lane, Epsom Road and Davis Road and the roads around them. Neighbouring places we cover include Bidston (1 mile south-east), Wallasey Village (2 miles north-east), Wallasey (2 miles east), Poulton (2 miles east) and Egremont (3 miles east). Larger places within reach include Birkenhead (3 miles south-east), Bebington (7 miles south-east), Heswall (6 miles south), West Kirby (4 miles south-west), Bromborough (7 miles south-east) and Greasby (3 miles south).
Near you in Leasowe
Typical jobs here are in homes near Castleway Primary School, Oyster Catcher pub and The Mosslands School, among other places. Nearby too are St Chad's (within half a mile north-west) and The Mosslands School (1.3 miles east). Leasowe has its own railway station: Leasowe station. Nearby you’ll also find Wirral Women and Children's Hospital (3 miles south) and Leasowe Castle (0.5 miles north-west). The countryside around Leasowe includes New Brighton Marine Lake and Bidston Hill.
Should you replace it?
A new bath means a plumber, removing a heavy bath, making good the walls and tiles and days without a bathroom. Re-enamelling gives the bath a new finish with the bath left where it is. Prices start from £350. There are no surprise extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Why us?
- Work done at your home or business
- A year’s guarantee on all work
- Generally one visit, start to finish
- Dust sheets down, tidy finish
Read our full price list or resurfacing vs replacement cost guide.
Prices and what affects them
Resurfacing from £350. We give every job a fixed quote from photos. This is what makes a difference:
- How many items we do on one visit
- What kind of damage it is
- How hard the colour is to match
- Any earlier repairs that need removing first
Set against the cost of replacement, a repair is normally a fraction of the price, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Getting a price from photos
We price nearly every job from photos. This is what to send:
- A wider photo showing the whole bath
- A coin beside the damage so we can judge size
- The postcode, so we can plan the visit
- Details of any past repairs
For a price in Leasowe, the easiest route is photos: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.
What else we do in Leasowe
How it works
We turn up when we said we would and checks the damage against your pictures first. Dust sheets and masking tape go down before any work starts. The work itself takes a full day, and we leave the room as we found it.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
Getting ready for the visit
- Tell us if there are stairs or a lift
- Open a window if you can
- Mention any parking restrictions or tricky access
How to get a price
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed quote.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
