Wirral · England
Bath re-enamelling & resurfacing in Wallasey Village, Wirral
Bath re-enamelling for Wallasey Village, without a refit. Get a fixed quote from your photos, then we come to you.
- Resurfacing from £350
- Thin, worn enamel in places
- A coating lifting around the plughole
Different materials, different repairs
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. It must be solid and not flex underfoot.
Bath re-enamelling at your home in Wallasey Village
After re-enamelling, the bath has a smooth, glossy, new-looking surface, but without the cost and upheaval of a refit. It suits anyone happy with the bathroom apart from the bath. We’re often asked to fix an original cast iron bath that needs restoring and an outdated colour you’d like to change, on pressed steel baths, basins & shower trays and acrylic baths.
The work is guaranteed for twelve months. If something isn’t right in that time, we come back and put it right.
- Where
- Wallasey Village (CH45, CH44)
- Region
- Wirral
- Guarantee
- A year, on every repair
- Quote
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Also in Wallasey Village
What we’re called out for in Wallasey Village
In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.
It’s worth getting a quote if you see:
- A bath that stays dull however much you clean it
- A peeling or bubbling previous coating
- An outdated colour you’d like to change
- Staining under the taps and around the waste
Before booking anyone
- What happens if the damage is worse than the photos show
- How long the guarantee is and what it covers
- Whether they match the colour on site
- Whether cleaning and preparation are in the price
The process
We work cleanly and quietly, so you can carry on at home. Protection goes down first, then the work takes most of the day. At the end we talk you through the curing time and the aftercare.
- We mask and protect the room and ventilate it.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- Once cured, normally by the following day, the bath is ready.
Before we arrive
- Clear the area around the damage
- Mention any earlier repairs or resurfacing
- Avoid using the area for a few hours before we arrive
How to get a price
For a price in Wallasey Village, photos are the quickest way: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Read more
Work for landlords and builders
We carry out planned and one-off repairs for housing associations and facilities teams in Wirral and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
We regularly work with letting and managing agents. Send the address, pictures and access details.
What we can’t put right
Honesty matters more than a booking, so here’s what a repair cannot fix:
- A bath split right through the body
- Damage hidden under a previous coating, until it’s stripped back
- Leaks from fittings rather than the bath
If in doubt, send photos and we’ll say what we think before booking.
Materials we repair
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
About Wallasey Village
Wallasey Village is about 1 mile north-west of Wallasey, in Wirral. Across the CH45 area, a technician comes to you. Wallasey Village is one of 44 places in Wirral we cover. Our jobs stretch from Wallasey Village to Liverpool (about 6 miles away).
Jobs in CH45 and CH44 are booked in the same way as anywhere else. Whether you live on Mere Lane, Green Lane and Rugby Road or anywhere nearby, a technician can come to you. If you’re just outside Wallasey Village, we cover Wallasey (1 mile south-east), Poulton (1 mile south-east), Egremont (1 mile east), Leasowe (2 miles south-west) and Bidston (2 miles south). Further out, we also cover Birkenhead (3 miles south), Bebington (6 miles south-east), Heswall (6 miles south), West Kirby (6 miles south-west), Bromborough (7 miles south-east) and Greasby (4 miles south-west).
Local landmarks in Wallasey Village
We visit homes around Central Park, St Mary's Catholic College and St Mary's College and the streets around them. Nearby too are Sheridans pub (less than half a mile south-east), St George's Primary School (less than half a mile east) and English Martyrs' Church (under half a mile north-east). There is a railway station in Wallasey Village itself: Wallasey Village station. Well-known places in the area include David Lewis Northern Hospital (3.1 miles east) and Marine Point (1.4 miles north-east). Green spaces nearby include Bidston Hill and New Ferry Butterfly Park.
Questions from Wallasey Village
Will you leave a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Can you fix a peeling bath coating?
Yes. Removing the old finish takes extra time, which we include in the price.
Is there a call-out fee?
No. Our quotes include travel, and we charge the same wherever you are.
Will the bath be moved?
No. We resurface it in place, so nothing else is disturbed.
It’s been repaired before. Can you still fix it?
Most of the time. Tell us what was done before and we will plan for it.
Is it safe with children and pets around?
Keep pets and children away from the work area on the day.
Do I have to be there?
Yes. We need access to the room while we work, at a time that suits you.
Is the work guaranteed?
Yes, for a year. If there is a problem with the work in that time, we come back and put it right.
How to look after the repair
How the surface is treated afterwards matters:
- Wipe the bath dry after use in hard water areas
- Wash away dyes and oils after use
- Do not use the bath until it has fully cured
- Get any chip repaired quickly
Wipe the bath dry after use where you can, particularly with hard water, and rinse off any bath products.
On a worn bath, rust spots keep spreading, and each one adds to the preparation. It’s simpler to resurface before they spread.
Repair or replace: which is better?
A replacement often means several trades over several days. Resurfacing takes one technician and typically a day, and the bath is usable the day after. Prices start from £350. What it costs depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. You get a fixed price from your photos, so there are no surprises on the day.
Why book with us
- Dust sheets down, tidy finish
- Colours mixed by hand to suit your surface
- Normally one visit, start to finish
- A year’s guarantee on all work
Read our pricing or resurfacing vs replacement cost guide.
What affects the price in Wallasey Village
Resurfacing from £350. There’s no area surcharge for Wallasey Village. What changes the price is:
- Previous DIY repairs that have to come out
- How many items we do on one visit
- The type of damage
- The material
Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
Send pictures for a quote
You can take the photos on your phone. Just make sure we can see:
- Any earlier repairs or coatings
- Natural light rather than flash
- One sharp close-up of the damage
- A wider photo showing the entire bath
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them to us. What comes back is a fixed quote, not a guess.
About our accreditations · Every repair comes with a one-year guarantee.
