Surrey · England
Bath Re-enamelling in Shottermill
Our repair technicians come to Shottermill for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.
- Resurfacing from £350
- A peeling or bubbling previous coating
- Thin, worn enamel in places
Shottermill and nearby
Shottermill is about 1 mile west of Haslemere, in Surrey. Anywhere in GU27, we come to you. Our technicians cover all 395 towns and villages across Surrey, from the larger towns to small villages. You can also see our page for London, about 40 miles away.
Our visits in GU27 and GU26 work the same way as everywhere else we cover. Whether you live on Fox Road, New Road and Lion Lane or anywhere nearby, we can come to you. With the A287 close by, Shottermill is simple for us to get to. Other places close to Shottermill include Hammer (1 mile west), Woolmer Hill (1 mile south-west), Haslemere (1 mile east), Bramshott Chase (1 mile north-west) and Hammer Bottom (1 mile west). We also work in nearby towns such as Guildford (13 miles north-east), Farnham (9 miles north), Cranleigh (12 miles east), Ash (11 miles north), Godalming (9 miles north-east) and Farncombe (10 miles north-east).
Around Shottermill
Locally, our jobs take us to homes close to The Staff Of Life Public House, Woolmer Hill School and Camelsdale Primary School and the streets around them. Nearby too are St. Stephen's Church (under half a mile east) and Woolmer Hill School (0.7 miles north-west). The closest station to Shottermill is Haslemere station, about 0.8 miles east. Well-known places in the area include Haslemere and District Hospital (1.3 miles east). For a walk, there is Gibbet Hill and Lynchmere Commons.
About our bath re-enamelling in Shottermill
After cleaning, repairing and priming, we spray on the new finish. The preparation is what makes it last, and we take our time over it. Typical jobs include a dull, rough surface that won’t come clean and worn patches where water runs and sits, on basins & shower trays, pressed steel baths and Victorian roll-tops.
You get a one-year guarantee, the same in Shottermill as everywhere else we work.
- Where
- Shottermill (GU27, GU26)
- County
- Surrey
- Cover
- A year, on every repair
- Quote
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Nearby places to Shottermill
More services for Shottermill
What we cannot put right
A few problems are outside what a surface repair can do:
- A cast iron or steel bath that is cracked right through
- Holes rusted through the metal
- A poorly supported acrylic bath, until it’s firmed up
Not sure? Send pictures and we will give you a straight answer before you book.
Materials we work on in Shottermill
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
Common problems we fix in Shottermill
By the time a bath is a few decades old, it may have a mix of issues: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.
Clients generally contact us about:
- An outdated colour you’d like to change
- Staining under the taps and around the waste
- Thin, worn enamel in places
- A coating lifting around the plughole
Comparing quotes
- How to care for the finish
- Who will actually do the work
- Whether the price covers travel
- How long it needs to cure
Repairs by material
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Rust around the waste is common on steel, so we pay close attention there.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s what we repair.
What we do, step by step
It’s a tidy, low-fuss visit. We agree the arrival time in advance, protect the area, then carry out the work, which normally takes a full day. If we find something your pictures didn’t show, we’ll explain it before carrying on.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the next day.
How to prepare
- Open a window if you can
- Let the surface dry out before the visit
- Let us know about parking or access
Ask for a price
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can price the job.
Related advice
Should I try a DIY kit first?
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
Why repair rather than replace?
For a sound bath, resurfacing costs far less than replacement, when you count removal, plumbing, tiling and decorating. It’s much quicker too. Resurfacing from £350, with every job priced individually. The price reflects the work involved, not your postcode. The full price is agreed before you book.
Why book with us
- Accredited with CHAS, Constructionline and SafeContractor
- Nothing taken out or refitted
- Rooms protected and left tidy
- One visit for most repairs
See our prices page or resurfacing vs replacement cost guide.
FAQs for Shottermill
Will the price change on the day?
We will show you and explain before doing anything extra. You will not be charged for anything you haven’t agreed.
Do you work for landlords and businesses?
We do, regularly. We can quote for several properties together and work between tenancies.
Can tenants book a repair?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
How long will the bath be out of use?
One day for most baths, ready the next day. We will confirm timings when we quote.
What areas do you cover?
The entire UK, including all of Surrey. Just include your postcode and we will confirm dates.
Will there be fumes?
Some odour is normal while we spray, so we ventilate the room. It clears as the finish cures.
Can I get a quote without a visit?
Usually, yes. A close-up and a wider photo are enough to give a fixed price.
Is it safe with children and pets around?
Please keep children and pets out of the room during the visit. Everywhere else in the home is fine.
Work for landlords and builders
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
We work for landlords, letting agents and housing providers in Shottermill as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Keeping it looking good
Much of the damage we repair could have been avoided. A few tips:
- Fix dripping taps quickly
- Store bottles off the bath
- Use washing-up liquid and a soft cloth
- Wipe the bath dry after use in hard water areas
Use mild, non-abrasive cleaners, do not use suction bath mats, and keep bottles and razors off the surface.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further.
About our accreditations · Every repair comes with a one-year guarantee.
