Surrey · England
Bath re-enamelling & resurfacing in Woolmer Hill, Surrey
Fixed-price bath re-enamelling in Woolmer Hill and the surrounding area, done in a single visit in most cases.
- Resurfacing from £350
- A roll-top that is seen better days
- Enamel that’s lost its shine and feels rough
Bath re-enamelling in Woolmer Hill, done in place
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. If you are dealing with enamel that’s lost its shine and feels rough and brown or grey marks that don’t clean off, we can generally put it right, whatever the material.
You are covered for a year from the day of the repair. If anything is not right, ring us and we will sort it.
- Where
- Woolmer Hill (GU27)
- County
- Surrey
- Warranty
- 12 months on all our work
- Price
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
DIY repairs versus a professional job
If you’re set on a kit, follow its instructions closely, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.
How it works
We begin by going over the job with you, so you know exactly what we’re doing. After that, protection goes down around the work area and the work begins. It normally takes most of the day.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s typically ready the day after.
Preparing for the visit
- Keep a parking space free if you can
- Tell us if there are stairs or a lift
- Open a window if you can
Ask for a price
Email us photos of the damage and one of the whole item, with your GU27 postcode, and we will reply with a fixed price.
Read more
Towns and villages near Woolmer Hill
What else we do in Woolmer Hill
Why repair rather than replace?
Replacing a bath can take several days across several trades. Re-enamelling is one technician, normally one day, and the bath is usable the day after. Resurfacing from £350, with every job priced individually. Compared with replacing, a repair is normally a fraction of the price, because there is no removal, plumbing or making good. The quote lists exactly what you are paying for.
Why book with us
- Straight answers about what a repair can do
- No extra charge for your area
- Free fixed quotes from pictures
- Colour-matched on site
Take a look at our prices page or resurfacing vs replacement cost guide.
How to look after the repair
Aftercare is simple:
- Have chips seen to early
- Repair dripping taps early
- Keep toiletries on a shelf rather than in the bath
- Use washing-up liquid and a soft cloth
Stick to mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
Do you need bath re-enamelling in Woolmer Hill?
Frequently the bath has just had decades of use. The body of the bath is typically perfectly sound.
Signs it’s time to call us include:
- Chips and rust in more than one place
- An old resurfacing that is failing
- Stains that will not shift
- A coloured bath you want in white
Questions to ask before you book
- Whether the price is fixed and includes VAT
- Whether a trained technician does the job
- Whether they match the colour on site
- Aftercare advice
Common questions in Woolmer Hill
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Which areas do you work in?
The entire UK, including all of Surrey. Send your postcode with your pictures and we’ll confirm dates.
Can tenants book a repair?
Of course. Ask your landlord first, and we can send them the quote if that helps.
Do you work for landlords and businesses?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses.
Do the materials smell?
Some materials have a smell while they’re applied. It clears as the materials cure.
Will the bath be moved?
No, it stays where it is. We work on the bath in place, with the room protected and ventilated.
Is it worth repairing rather than replacing?
Usually, when the rest is in good condition. A repair avoids removal and making good. We will tell you honestly if replacement makes more sense.
How long does re-enamelling last?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.
How we price bath re-enamelling
Prices start from £350. Each job gets its own fixed price. This is what makes a difference:
- Any earlier repairs that need removing first
- Unusual colours or finishes
- The material and finish
- Whether it’s a chip, crack, burn or wear
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Getting a price from photos
Most quotes are done from photos alone. To make it quick:
- A coin or ruler next to the damage for scale
- The material, if you know it
- Natural light rather than flash
- Details of any past repairs
For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
Different materials, different repairs
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s the part we put right.
When a repair isn’t the answer
Before booking, it’s worth knowing the limits:
- A poorly supported acrylic bath, until it’s firmed up
- Steel that has corroded right through
- A bath split right through the body
Send us photos and we will tell you honestly before you book.
Materials we repair
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
About Woolmer Hill
Woolmer Hill is about 1 mile south-west of Haslemere, in Surrey. Anywhere in GU27, we carry out the work at your property. Woolmer Hill is one of 395 places in Surrey where we work. You can also see our page for London, about 41 miles away.
Postcode districts we cover here: GU27. Streets in the area include Moor Road, Copse Road and Hammer Lane. Neighbouring places we cover include Hammer (1 mile north), Hammer Bottom (1 mile north-west), Shottermill (1 mile north-east), Linchmere (1 mile south-west) and Bramshott Chase (1 mile north). We also work in nearby towns such as Guildford (14 miles north-east), Farnham (9 miles north), Cranleigh (12 miles east), Ash (12 miles north), Godalming (9 miles north-east) and Farncombe (10 miles north-east).
Landmarks near Woolmer Hill
We visit homes around Mill Tavern, Woolmer Hill School and Camelsdale Primary School, among other places. Nearby too are St Paul (0.7 miles east) and Woolmer Hill School (0.9 miles north). Woolmer Hill’s nearest station is Haslemere station, roughly 1.5 miles north-east of the centre. Well-known places in the area include Haslemere and District Hospital (2 miles north-east). Open spaces near Woolmer Hill include Lynchmere Commons and Wheeler's Down.
About our accreditations · Every repair comes with a one-year guarantee.
