Cheshire West and Chester · England

Bath re-enamelling & resurfacing in Shotwick, Cheshire West and Chester

Local bath re-enamelling for Shotwick: a fixed quote from photos, a tidy visit and a one-year guarantee.

  • Resurfacing from £350
  • A period or roll-top bath worth keeping
  • Several chips and rust patches
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath re-enamelling in Shotwick

What affects the price in Shotwick

Resurfacing from £350. We price every job individually, from your photos. The main factors are:

  • Whether we combine several jobs
  • The material and finish
  • Any earlier repairs that need removing first
  • How hard the colour is to match

Every job is a little different, so we price each one individually. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.

Quotes from your pictures

Two or three clear pictures are typically enough. It helps if you send:

  • A picture taken from further back
  • A coin or ruler next to the damage for scale
  • The postcode, so we can plan the visit
  • Good light, ideally daylight, without flash glare

No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through.

How we handle bath re-enamelling in Shotwick

We re-enamel plenty of period and roll-top baths, which would be difficult and expensive to replace. Doing them in place keeps an original feature. We are frequently asked to fix wear marks under the taps and a dull, rough surface that won’t come clean, across basins & shower trays, pressed steel baths and cast iron baths.

Peace of mind is built in: each job carries a one-year guarantee, and we explain what it covers before you book.

Where
Shotwick (CH1)
County
Cheshire West and Chester
Warranty
A year, on every repair
Price
From £350. Fixed and free, based on photos
Telephone
0345 017 0787
Updated
23 October 2026
Roll-top bath being refinished by a Surface Doctor technician

What happens on the day

Expect a friendly, tidy visit. We agree the arrival time in advance, protect the area, then carry out the work, which normally takes a full day. If anything looks different from your pictures, we’ll talk to you before going ahead.

  1. The room is masked, protected and ventilated.
  2. Next we degrease the bath and fix chips and rust spots.
  3. We prepare the surface and apply a bonding primer.
  4. We spray several coats of new enamel finish.
  5. Once cured, normally by the following day, the bath is ready.

How to prepare

  • Let us know about parking or access
  • Have somewhere for us to park nearby if possible
  • Tell us about any previous repairs or coatings

Get a quote

A quote takes minutes to ask for: photograph the damage, then the entire bath, include your postcode and send them to us. What comes back is a fixed quote, not a guess.

Get a fixed quote

Read more

Should I try a DIY kit first?

If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.

It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.

Different materials, different repairs

Roll-top and period baths

Freestanding roll-tops can be done inside and out, and the outside can be refinished too.

Cast iron

A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s the part we put right.

Repairing versus replacing in Shotwick

A replacement frequently means several trades over several days. Resurfacing takes one technician and typically a day. Prices start from £350. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send photos and you’ll get a fixed figure.

Why choose Surface Doctor in Shotwick

  • Same prices wherever you are
  • Fixed prices from your pictures
  • Dust sheets down, tidy finish
  • Typically one visit, start to finish

Read our pricing and guide to resurfacing and replacement costs.

Honest limits

We would rather lose a job than do one that will not last, so these are the limits:

  • Plumbing leaks, which need a plumber
  • Acrylic that moves when you stand in it
  • A bath split right through the body

Send us photos and we will tell you honestly before you book.

Surfaces we repair

  • Cast iron baths
  • Victorian roll-tops
  • Acrylic baths
  • Basins & shower trays
  • Pressed steel baths

Where we work around Shotwick

Shotwick is about 3 miles north-east of Connah's Quay, in Cheshire West and Chester. Book a date that suits you, and we’ll give you an arrival time in advance, so you are not left waiting in all day. Shotwick is one of 224 places in Cheshire West and Chester we cover. Our nearest city page is Liverpool, about 12 miles away.

Our technicians cover all of CH1 and the streets around it. If you are just outside Shotwick, we cover Woodbank (1 mile north-east), Saughall (2 miles south-east), Sealand (2 miles south-east), Capenhurst (2 miles north-east) and Ledsham (2 miles north-east). We also work in nearby towns such as Chester (5 miles south-east), Ellesmere Port (4 miles north-east), Neston (4 miles north-west), Boughton (6 miles south-east), Frodsham (12 miles east) and Hoole (6 miles south-east).

Near you in Shotwick

Locally, our jobs take us to homes close to St Michael's Church, among other places. Shotwick’s nearest station is Hawarden Bridge station, roughly 2.2 miles south-west of the centre. Nearby you will also find Deeside Community Hospital (3.2 miles south-west) and Ellesmere Port and Neston (2.7 miles north). The countryside around Shotwick includes Shotwick Lake and Burton Mere Wetlands.

Map of Shotwick © OpenStreetMap contributors

Aftercare tips

Simple care helps the repair last. Our advice:

  • Dry the bath after use to stop limescale
  • Repair dripping taps early
  • Avoid suction-cup mats
  • Store bottles off the bath

Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.

Leave a peeling coating alone. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.

Work for landlords and builders

Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We will fit around changeovers where we can.

We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.

Your questions about bath re-enamelling in Shotwick

Do you charge for travel?

Travel is included in the price, with the same prices everywhere we work.

Is my repair covered?

Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.

What happens next?

We come back with a fixed price. There’s no obligation to book.

Do you cover Shotwick?

We do. Technicians travel to Shotwick from across the region, with no extra charge for travel.

Can you redo someone else’s repair?

Most of the time. Let us know what was used before and we will plan for it.

Will the price change on the day?

Your quote covers the damage in the pictures. If there’s more, we will tell you before starting.

Is there a smell?

Yes, while we are applying the finish. Ventilation keeps it down, and it fades as the finish cures.

Will the new finish last?

That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.