Somerset · England
Bath Re-enamelling for Shurton homes
We travel to Shurton for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.
- Resurfacing from £350
- Staining under the taps and around the waste
- A bath that stays dull however much you clean it
Keeping it looking good
Nothing complicated is needed, just a few sensible habits:
- Keep suction mats out of the bath
- Wash away dyes and oils after use
- Stick to gentle, non-abrasive cleaners
- Don’t leave a chip unrepaired
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
On a worn bath, rust spots keep spreading. Resurfacing before they spread keeps it simpler.
Bath re-enamelling at your home in Shurton
If your bath is sound but looks tired, resurfacing is normally the best value. There is no removal, plumbing or tiling involved. Whether it’s an original cast iron bath that needs restoring and an old resurfacing that’s failing, we can usually put it right.
We guarantee the work for a year. If there is a problem with the repair within the year, we return and sort it.
- Where
- Shurton (TA5)
- Area hub
- Somerset
- Cover
- One year on every repair
- Price
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
When to call us in Shurton
Once enamel loses its gloss, it stains more easily, and cleaning harder only makes it worse. That’s the point where re-enamelling makes sense.
You may need us if you’ve spotted:
- Chips and rust in more than one place
- A roll-top that’s seen better days
- A dull, rough surface that will not come clean
- An old resurfacing that is failing
What to look for in a quote
- Aftercare advice
- Is the price fixed, and does it include VAT?
- If travel is included in the price
- How the colour is matched
What your bath is made of matters
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
Can I fix it myself?
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.
Landlords, agents and businesses in Shurton
Housing associations and facilities teams use us for planned and reactive repairs in Somerset and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
If you manage property in Shurton, we’ll quote for several properties at once. Send photos for each one and we’ll come back with a combined price.
Honest limits
A repair is not right for every job, for example:
- Damage hidden under a previous coating, until it’s stripped back
- Leaking taps or wastes (a plumber’s job)
- A metal bath with a through crack
Send us photos and we will tell you honestly.
Surfaces we repair
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
- Acrylic baths
- Basins & shower trays
Your questions about bath re-enamelling in Shurton
Can tenants book a repair?
We can work for tenants, landlords or agents. Just ensure the landlord agrees.
Does re-enamelling smell?
Some odour is normal while we spray, which is why we ventilate the bathroom. It fades as the coating cures.
Will there be a smell?
There may be a mild smell during the work, which fades afterwards.
How long will the bath be out of use?
Normally a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
Do you need to take the bath out?
No. It’s re-enamelled where it stands, so nothing else is disturbed.
What do you need from me?
Some photos, your postcode and how to reach you. On the day, we only need access to the room.
What happens next?
We review the pictures and send a fixed quote.
Do you charge for travel?
No. Our quotes include travel, and we charge the same wherever you are.
Shurton and the surrounding area
Shurton is about 8 miles south-west of Burnham-on-Sea, in Somerset. From the centre of Shurton to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. Shurton is one of 640 towns and villages in Somerset we cover.
All of TA5 is within our area, from the main roads to the quietest streets. Other places close to Shurton include Stogursey (1 mile south), Lilstock (2 miles west), Fiddington (3 miles south-east), Nether Stowey (3 miles south) and Dodington (3 miles south-west). We also work in nearby towns such as Taunton (12 miles south), Bridgwater (8 miles south-east), Minehead (14 miles west), Burnham-on-Sea (8 miles north-east), Wellington (15 miles south) and Sydenham (8 miles south-east).
Near you in Shurton
We visit homes around The Babbling Brook Inn, Church of St Andrew and Stogursey Church of England Primary School and the streets around them. Further afield, we also cover the area around Stogursey Castle (1 mile south). Green spaces nearby include WWT Steart Marshes.
Prices and what affects them
Resurfacing from £350. Every quote is fixed and free. What we take into account:
- How easy the damage is to reach
- How much damage there is
- Whether old repairs or coatings need taking off
- The colour and finish to match
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send pictures and we’ll give you the exact figure.
Quotes from your pictures
The better the photos, the more accurate the price. Here’s what helps:
- Where you are, by postcode
- A coin beside the damage so we can judge size
- Whether it’s been repaired or coated before
- One picture of the whole bath
For a price in Shurton, pictures are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
More services for Shurton
How the visit works
We work cleanly and quietly, so you can carry on at home. Protection goes down first, then the job itself takes the best part of a day. At the end we talk you through how soon it can be used and how to care for it.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- Once cured, normally by the following day, the bath is ready.
Preparing for the visit
- Tell us about any previous repairs or coatings
- Have a window or extractor fan available
- Mention if the room is upstairs or in a flat
Ask for a price
You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
