Somerset · England

Bath Re-enamelling in Stogursey

Bath re-enamelling in and around Stogursey: photo quotes, tidy work and a year’s guarantee.

  • Resurfacing from £350
  • A bath in a colour that no longer suits
  • A peeling or bubbling previous coating
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath re-enamelling in Stogursey?

Signs you need bath re-enamelling in Stogursey

Older baths often have several problems at once: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.

Signs it’s time to call us include:

  • A bath in a colour that no longer suits
  • A bath that stays dull however much you clean it
  • An old resurfacing that’s failing
  • Worn patches where water runs and sits

Before booking anyone

  • What happens if the damage is worse than the pictures show
  • What the guarantee covers, and for how long
  • Whether there are any call-out or travel charges
  • Whether they match the colour on site

How to compare quotes

Bath re-enamelling in Stogursey without replacing anything

Cast iron and steel baths are ideal for re-enamelling, and acrylic baths can be resurfaced too. You end up with a smooth, glossy surface. Our repair technicians work on basins & shower trays, pressed steel baths and Victorian roll-tops, and the jobs we see most are enamel that’s lost its shine and feels rough and a period or roll-top bath worth keeping.

A one-year guarantee comes as standard.

Surface Doctor technician refinishing the outside of a roll-top bath
Where
Stogursey (TA5)
Region
Somerset
Cover
A year, on every repair
Quotes
From £350. Free and fixed, from your photos
Call
0345 017 0787
Last updated
23 October 2026

What happens on the day

On the day, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. The job generally takes a full day. We clean up when we are done and let you know when you can use it again.

  1. We check the bath and agree the finish with you.
  2. Everything around the bath is masked and covered.
  3. We degrease the bath, fix any damage and key the surface.
  4. Primer and finish coats are applied.
  5. We remove the masking, tidy up and give you the curing time.

Getting ready for the visit

  • Plan for the room to be out of bounds to pets and children
  • Let us know which floor the room is on
  • Avoid using the area for a few hours before we arrive

Get a quote

For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.

Send pictures for a quote

Advice

Should I try a DIY kit first?

We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.

It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.

What we cannot put right

A repair is not right for every job, for example:

  • Steel that has corroded right through
  • Anything hidden under an old coating, until we remove it
  • Plumbing leaks, which need a plumber

If in doubt, send photos and we’ll say what we think.

Materials we work on in Stogursey

  • Victorian roll-tops
  • Basins & shower trays
  • Pressed steel baths
  • Acrylic baths
  • Cast iron baths

Repair or replace: which is better?

Replacement only makes sense in a few cases: a cracked-through bath, a change of size or shape, or a full refit. In most other cases, resurfacing is the better choice. Prices start from £350. We charge the same wherever you are, with no extra for Stogursey. What changes the price is the job itself: how much damage, what it’s made of and how many items.

What you get with us

  • One visit for most repairs
  • Dust sheets down, tidy finish
  • Honest advice, even when it means no job
  • Everything repaired in place

Take a look at our pricing and resurfacing vs replacement cost guide.

Aftercare tips

Aftercare is simple:

  • A dripping tap should be fixed promptly
  • Never use suction bath mats
  • Stick to gentle, non-abrasive cleaners
  • Do not leave a chip unrepaired

Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Fix dripping taps quickly.

Do not try to scrub a worn bath back to shine. It just wears the enamel further.

Stogursey questions

What if the damage is worse than the photos show?

Your quote covers the damage in the photos. Anything extra is discussed before we begin.

Do you cover Stogursey?

Yes. We cover the entire UK and come to Stogursey and the rest of Somerset. Send us pictures for a fixed quote, or call 0345 017 0787.

Is my repair covered?

Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.

Do you work for landlords and businesses?

Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses in Stogursey.

Is it messy?

Very little mess: we sheet and mask everything nearby, and we leave the room clean.

How long is the bath unusable?

Normally one day, with the bath ready the day after. Deeply pitted baths may need a second day.

Are you a vetted contractor?

We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

It’s been repaired before. Can you still fix it?

In most cases. The old repair comes out first, so let us know about it.

What bath re-enamelling costs

Resurfacing from £350. Every quote is fixed and free. What we look at:

  • The colour and finish to match
  • Whether it’s a chip, crack, burn or wear
  • The material
  • Previous DIY repairs that have to come out

It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.

How to get a fixed price

A couple of clear pictures is all it takes. It helps if you send:

  • A coin beside the damage so we can judge size
  • What it’s made of, if you know
  • Any earlier repairs or coatings
  • Your postcode, so we can check dates

Email us a picture of the damage and one of the whole item, and tell us you’re in Stogursey, and we will reply with a fixed quote.

Where we work around Stogursey

Stogursey is about 7 miles north-west of Bridgwater, in Somerset. Clients in Stogursey get the same service as everywhere else we cover: a fixed quote from photos, then a visit to do the work. We work in 640 places across Somerset.

Here we cover the TA5 postcode area. Whether you live on High Street, Lonlay Mews and Lime Street or anywhere nearby, a technician can come to you. Nearby, we also work in Shurton (1 mile north), Fiddington (2 miles south-east), Nether Stowey (2 miles south), Lilstock (2 miles north-west) and Dodington (2 miles south-west). Within a short drive, we also cover Taunton (12 miles south), Bridgwater (7 miles south-east), Minehead (15 miles west), Burnham-on-Sea (8 miles north-east), Wellington (14 miles south) and Sydenham (8 miles south-east).

Local landmarks in Stogursey

In Stogursey, that means homes near Church of St Andrew, Greyhound Inn and Stogursey Church of England Primary School. Nearby you’ll also find Stogursey Castle (within half a mile south). Not far away are WWT Steart Marshes.

Map of Stogursey © OpenStreetMap contributors

Landlord and trade work in Stogursey

For anyone letting property in or around Stogursey, we can repair and quote for several addresses together. Just send pictures for each address and we’ll price them together.

We are used to working with agents and managing companies. Send the address, pictures and access details.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.