Staffordshire · England
Bath re-enamelling & resurfacing in Slindon, Staffordshire
Full bath re-enamelling and resurfacing for homes and businesses in Slindon and across Staffordshire. Free, fixed quotes from your photos.
- Resurfacing from £350
- Worn patches where water runs and sits
- Chips and rust in more than one place
Bath re-enamelling at your home in Slindon
We clean, repair and prime the bath before spraying the new finish. The preparation is what makes it last, so we do not cut corners on it. Common call-outs are for an original cast iron bath that needs restoring and thin, worn enamel in places, across cast iron baths, acrylic baths and basins & shower trays.
You are covered after we leave: each job carries a one-year guarantee, and we explain what it covers before you book.
- Where
- Slindon (ST21)
- Area hub
- Staffordshire
- Cover
- One year on every repair
- Quote
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Keeping it looking good
So the finish stays in good condition:
- A quick wipe after use keeps limescale away
- Fix dripping taps quickly
- Leave the bath for the full curing time before using it
- Clean with a soft cloth and mild detergent
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Fix dripping taps quickly.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further and makes resurfacing more work.
What affects the price in Slindon
Prices start from £350. We price every job individually. What matters most is:
- The type of damage
- Access to the area
- The colour and finish to match
- How many items we do on one visit
Our prices are the same across the UK, with no extra for Slindon. The job itself decides the price: how much damage, what it’s made of and how many items.
How to get a fixed quote
You can take the pictures on your phone. Ensure they show:
- Details of any past repairs
- One sharp close-up of the damage
- Something in shot to show the size
- A wider photo showing the entire bath
To get a price, send two or three pictures through our quote form or call us. We’ll tell you honestly if a repair is the right fix.
Repairing versus replacing in Slindon
When the bathroom is fine apart from the bath’s finish, re-enamelling is the least disruptive fix. Nothing else is disturbed. Our bath re-enamelling starts from £350. A repair normally costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
Why Slindon customers choose us
- We come to you, anywhere in the UK
- CHAS, Constructionline and SafeContractor accredited
- Fixed prices from your photos
- One price list for the whole UK
Read our full price list or guide to resurfacing and replacement costs.
Slindon: your questions answered
Do the materials smell?
There may be a mild smell during the work, which fades afterwards.
Can you repair several things at once?
Of course, and it typically saves money. Send pictures of everything together and we will quote them together.
What areas do you cover?
The entire UK, including all of Staffordshire. Just include your postcode and we’ll offer you dates.
Is there a call-out fee?
There’s no separate call-out charge. The fixed price covers the visit and the work.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
How do I get a price for bath re-enamelling in Slindon?
Prices start from £350. We give a fixed price from your photos. Send a close-up and a picture of the entire item and your postcode.
Can you change the colour of my bath?
Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.
Does the bath have to be removed?
No, it stays where it is. Everything is done in your bathroom, with the room protected and ventilated.
What a repair can’t fix
We would rather lose a job than do one that will not last, so here’s what a repair can’t put right:
- Holes rusted through the metal
- A cast iron or steel bath that is cracked right through
- Anything hidden under an old coating, until we remove it
If in doubt, send pictures and we’ll say what we think before you book.
Materials we work on in Slindon
- Cast iron baths
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
What we’re called out for in Slindon
In hard water areas, limescale and the cleaning it needs wear enamel faster, and abrasive cleaners do the most damage.
You may need us if you’ve spotted:
- Thin, worn enamel in places
- A period or roll-top bath worth keeping
- Brown or grey marks that don’t clean off
- Enamel that’s lost its shine and feels rough
What to look for in a quote
- If travel is included in the price
- Whether cleaning and preparation are in the price
- Who turns up on the day
- What the guarantee covers, and for how long
About Slindon
Slindon is about 5 miles west of Stone, in Staffordshire. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Slindon is one of 512 places in Staffordshire we cover. You can also see our page for Birmingham, about 33 miles away.
Here we cover the ST21 postcode area. Slindon is on the A519, which makes it straightforward to reach. Neighbouring places we cover include Mill Meece (1 mile east), Coldmeece (2 miles east), Elford Heath (2 miles south), Eccleshall (3 miles south) and Copmere End (3 miles south). We also work in nearby towns such as Stafford (8 miles south-east), Newcastle-under-Lyme (9 miles north), Longton (8 miles north-east), Stone (5 miles east), Alsager (14 miles north) and Kidsgrove (13 miles north).
Local landmarks in Slindon
Our clients here include homes close to Church of St Chad, among other places. Slindon’s nearest station is Stone station, about 4.6 miles east of the centre. Other landmarks nearby include Eccleshall Castle (2.1 miles south). Open spaces near Slindon include Jackon's Coppice and Marsh and Cop Mere.
DIY repairs versus a professional job
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
If you do try a kit, read the instructions carefully, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.
What happens on the day
Your technician turns up at the time we agreed with you, introduces themselves and looks over the damage before anything else. Dust sheets and masking tape go down before any work starts. Most visits take a full day, and the room is left clean and tidy.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
Preparing for the visit
- Mention if the room is upstairs or in a flat
- Let the surface dry out before the visit
- Clear the area around the damage
Getting a price
We price from pictures so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.
Related advice
Repairs by material
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. It must be solid and not flex underfoot for the finish to last.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Places near Slindon
More services for Slindon
About our accreditations · Every repair comes with a one-year guarantee.
