Staffordshire · England
Bath Re-enamelling for Mill Meece homes
Full bath re-enamelling and resurfacing for homes and businesses in Mill Meece and across Staffordshire. Send pictures for a free, fixed quote.
- Resurfacing from £350
- Lots of chips and rust spots
- Staining under the taps and around the waste
Landlords, agents and businesses in Mill Meece
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
We’re used to working with agents and managing companies. Send the address, photos and access details and we’ll handle the rest.
About our bath re-enamelling in Mill Meece
Cast iron and steel baths are ideal for re-enamelling, and we can resurface acrylic baths as well. The result is a smooth, even, glossy finish. Whether it’s several chips and rust patches and worn patches where water runs and sits, we can help, on basins & shower trays, Victorian roll-tops and acrylic baths alike.
Whatever the size of the job, you get the same one-year guarantee in Mill Meece and across Staffordshire.
- Location
- Mill Meece (ST21)
- Region
- Staffordshire
- Cover
- One year on every repair
- Quote
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Prices and what affects them
Prices start from £350. Prices are worked out job by job. What matters most is:
- The type of damage
- Unusual colours or finishes
- How many areas need work
- Doing more than one item at once
A repair generally costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
Quotes from your photos
Most quotes are done from photos alone. To make it quick:
- A clear, close picture of the problem area
- A wider photo showing the whole bath
- Your postcode, so we can check dates
- Details of any past repairs
Getting a price is easy: take a close-up of the damage and a photo from further back, send them to us with your postcode, and you will get a fixed price back. There’s no charge for the quote and you’re under no obligation.
The process
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, cover and mask the work area, and get on with the job, which usually takes the best part of a day. If anything looks different from your photos, we’ll talk to you before going ahead.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Let us know which floor the room is on
- Ensure the room can be ventilated
- Mention any earlier repairs or resurfacing
Ask for a price
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Advice
Different materials, different repairs
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so a new finish makes them look new again.
How to look after the repair
So the finish stays in good condition for years:
- Store bottles off the bath
- Get any chip repaired quickly
- Repair dripping taps early
- Rinse off hair dye, oils and bath bombs immediately
The first few days matter most: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.
Don’t try to scrub a worn bath back to shine. It removes more of the surface.
Why repair rather than replace?
A replacement often means several trades over several days. Resurfacing takes one technician and typically a day, and the bath is usable the day after. Resurfacing from £350, with every job priced individually. Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access, and combining items on one visit brings it down.
Why us?
- Most jobs done in one visit
- A year’s guarantee on all work
- A fixed quote before booking
- No extra charge for your area
Read our full price list or bath cost comparison.
Mill Meece and nearby
Mill Meece is about 4 miles west of Stone, in Staffordshire. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Our technicians cover all 512 towns and villages across Staffordshire, from the larger towns to small villages. You can also see our page for Birmingham, about 33 miles away.
All of ST21 is covered. Nearby, we also work in Slindon (1 mile west), Coldmeece (1 mile east), Eccleshall (3 miles south), Elford Heath (3 miles south) and Wootton (4 miles south). Larger places within reach include Stafford (8 miles south-east), Newcastle-under-Lyme (9 miles north), Longton (8 miles north-east), Stone (4 miles east), Alsager (14 miles north) and Kidsgrove (13 miles north).
Near you in Mill Meece
We visit homes around Church of St Chad and the streets around them. Mill Meece’s nearest station is Stone station, about 3.9 miles east of the centre. Further afield, we also cover the area around Eccleshall Castle (2.3 miles south). Green spaces nearby include Cop Mere and Jackon's Coppice and Marsh.
Places near Mill Meece
What else we do in Mill Meece
Common problems we fix in Mill Meece
Often the bath has just had decades of use. Underneath, a cast iron or steel bath is usually as strong as ever.
Common reasons people in Mill Meece contact us include:
- A peeling or bubbling previous coating
- Wear marks under the taps
- Lots of chips and rust spots
- A period or roll-top bath worth keeping
Before booking anyone
- What protection goes down before work starts
- How to care for the finish
- Whether a trained technician does the job
- What happens if they find more damage
What we cannot put right
We won’t take on work that won’t last, so here’s what a repair can’t put right:
- Holes rusted through the metal
- Leaks from fittings rather than the bath
- Problems we can’t see until an old finish comes off
If in doubt, send photos and we will say what we think.
Materials we repair
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
Your questions about bath re-enamelling in Mill Meece
Can you do the outside of a roll-top?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
How durable is a resurfaced bath?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.
Is a repair better than a new one?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it isn’t worth repairing, we’ll tell you.
Is my repair covered?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Do you do work for letting agents?
We do, regularly. We can quote for several properties together and work between tenancies.
Can I get a quote without a visit?
In nearly every case. If pictures do not show enough, we will ask for another angle.
Is there any odour?
There may be a mild smell during the work, which fades afterwards.
About our accreditations · Every repair comes with a one-year guarantee.
