Staffordshire · England
Bath Re-enamelling for Coldmeece homes
Problem with your bath in Coldmeece? We repair it in place, mix the colour on the day and guarantee the work for a year.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- An outdated colour you’d like to change
Bath re-enamelling in Coldmeece without replacing anything
We re-enamel plenty of period and roll-top baths, which are heavy, hard to move and costly to replace. Doing them in place keeps an original feature. If you are dealing with staining under the taps and around the waste and a roll-top that’s seen better days, we can usually put it right, whatever the material.
Your repair is guaranteed for a year, as with every job we do.
- Where
- Coldmeece (ST15)
- Region
- Staffordshire
- Cover
- 12 months on all our work
- Price
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Keeping it looking good
To keep it looking its best:
- Keep suction mats out of the bath
- Store bottles off the bath
- Repair dripping taps early
- Use washing-up liquid and a soft cloth
The first few days matter most: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface and makes resurfacing more work.
Repair or replace in Coldmeece?
A refit takes several trades and several days. Resurfacing is one technician, normally in a day, and the bath can be used the day after. Our bath re-enamelling starts from £350. What it costs depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. We give a fixed price from your pictures, so you know the cost before booking.
Why book with us
- Work done at your home or business
- Accredited with CHAS, Constructionline and SafeContractor
- Nothing taken out or refitted
- Rooms protected and left tidy
Take a look at our prices page and bath cost comparison.
Landlords, agents and businesses in Coldmeece
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip.
When we’d advise against a repair
A repair isn’t always the answer, and we will tell you before we start. We can’t fix:
- Steel that has corroded right through
- Leaking taps or wastes (a plumber’s job)
- Damage hidden under a previous coating, until it’s stripped back
Send us pictures and we will tell you honestly before booking.
What we work on
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
How we price bath re-enamelling
Resurfacing from £350. You will not pay by the hour. The price depends on:
- The material and finish
- How many areas need work
- Any earlier repairs that need removing first
- What kind of damage it is
Rather than charging by the hour, we price the entire job up front. Damage, material and access decide it.
Getting a price from pictures
Most quotes are done from pictures alone. To help us price it:
- Any details about the material
- A wider photo showing the entire bath
- A clear, close picture of the problem area
- Any earlier repairs or coatings
We price from photos so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Coldmeece questions
Can you re-enamel a roll-top bath?
Yes, often. The inside is resurfaced, and we can refinish the outside as well.
Is there a call-out fee?
Travel is included in the price, with the same prices everywhere we work.
Will there be fumes?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
Is a repair better than a new one?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.
Do you cover the whole of Staffordshire?
Everywhere in the UK, Coldmeece included. Travel is included in the price.
Can you make a coloured bath white?
Yes, white is the usual choice. Mention the colour you want when you send photos.
What do you need from me?
Photos of the damage, a photo of the entire bath and your postcode. Then we’ll agree a date.
Can you fix a peeling bath coating?
Yes, we do this regularly. Removing the old finish takes extra time, which we include in the price.
How the visit works
We work cleanly and quietly, so you can carry on at home. Protection goes down first, then the job itself takes the best part of a day. Before we leave, we explain how soon it can be used and how to care for it.
- We mask and protect the room and ventilate it.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- The bath is left to cure and can typically be used the next day.
Getting ready for the visit
- Open a window if you can
- Keep pets and children out of the room while we work
- Let us know which floor the room is on
Ask for a price
Most clients in Coldmeece get their price from photos. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.
Related advice
Do you need bath re-enamelling in Coldmeece?
Older baths frequently have several problems at once: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.
Look out for any of the following:
- A coating lifting around the plughole
- A period or roll-top bath worth keeping
- A coloured bath you want in white
- Thin, worn enamel in places
Before you book anyone
- What protection goes down before work starts
- How changes to the job are handled
- Who will actually do the work
- If travel is included in the price
Towns and villages near Coldmeece
Also in Coldmeece
Repairs by material
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
About Coldmeece
Coldmeece is about 3 miles west of Stone, in Staffordshire. Wherever you are in the ST15 postcode area, a technician comes to you. We work in 512 places in Staffordshire, from the larger towns to small villages. We work right across the region, from Coldmeece to Birmingham (about 32 miles away).
Our technicians cover all of ST15 and the streets around it. Streets in the area include Meece Road and South Road. If you are just outside Coldmeece, we cover Mill Meece (1 mile west), Slindon (2 miles west), Eccleshall (3 miles south-west), Elford Heath (3 miles south-west) and Wootton (4 miles south-west). Larger places within reach include Stafford (7 miles south-east), Newcastle-under-Lyme (9 miles north), Longton (7 miles north-east), Rugeley (15 miles south-east), Stone (3 miles east) and Hednesford (15 miles south-east).
What’s near Coldmeece
In Coldmeece, that means homes near Springfields First School. Coldmeece’s nearest station is Stone station, about 2.7 miles north-east. Further afield, we also cover the area around Eccleshall Castle (2.7 miles south-west). Not far away are Jackon's Coppice and Marsh and Cop Mere.
About our accreditations · Every repair comes with a one-year guarantee.
