Perth and Kinross · Scotland
Bath re-enamelling & resurfacing in Spittal of Glenshee, Perth and Kinross
Local bath re-enamelling for Spittal of Glenshee: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- A peeling or bubbling previous coating
- A roll-top that’s seen better days
Bath re-enamelling at your home in Spittal of Glenshee
After re-enamelling, the bath has a smooth, glossy, new-looking surface, but without the cost and upheaval of a refit. It’s ideal if you like your bathroom but not the state of the bath. We are often asked to fix chips and rust in more than one place and thin, worn enamel in places, in acrylic baths, Victorian roll-tops and basins & shower trays.
Whatever the size of the job, you get the same one-year guarantee in Spittal of Glenshee and across Perth and Kinross.
- Area
- Spittal of Glenshee (PH10)
- Region
- Perth and Kinross
- Cover
- One year on every repair
- Price
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
When to call us in Spittal of Glenshee
The gloss on enamel is thin, and abrasive cleaning slowly wears it away. Eventually the surface turns porous and stains.
Send us a picture if you notice any of these:
- Enamel that is lost its shine and feels rough
- A bath in a colour that no longer suits
- Stains that won’t shift
- A period or roll-top bath worth keeping
Before booking anyone
- When it can be used again
- The length of the guarantee and what it covers
- How the room is protected while they work
- Whether a trained technician does the job
Spittal of Glenshee and nearby
Spittal of Glenshee is about 16 miles north of Blairgowrie and Rattray, in Perth and Kinross. Wherever you are in the PH10 postcode area, we carry out the work at your property. Spittal of Glenshee is one of 107 places in Perth and Kinross where we work. You can also see our page for Edinburgh, about 61 miles away.
Every address in PH10 is within our area, from the main roads to the quietest streets. Neighbouring places we cover include Kirkmichael (7 miles south), Netherton (11 miles south), Bridge of Cally (12 miles south), Moulin (12 miles south-west) and Pitlochry (13 miles south-west).
What’s near Spittal of Glenshee
We visit homes around Church and the streets around them. A little further out are Dalnaglar Castle (4 miles south-east). Not far away are Loch Beanie.
Should I try a DIY kit first?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
Materials and what they mean for the repair
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. It must be solid and not flex underfoot.
Places near Spittal of Glenshee
What else we do in Spittal of Glenshee
Prices and what affects them
Resurfacing from £350. There’s no area surcharge for Spittal of Glenshee. What changes the price is:
- How much damage there is
- The type of damage
- The material and finish
- Whether we combine several jobs
Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access, and doing several items at once reduces it.
How to get a fixed price
It only takes a minute to photograph the damage, and it saves a visit. Try to send:
- A close-up of the damage, in focus
- Any earlier repairs or coatings
- A coin or ruler next to the damage for scale
- Any details about the material
If you’re in Spittal of Glenshee and want a price, pictures are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Looking after it afterwards
So the finish stays in good condition:
- Never use suction bath mats
- Store bottles off the bath
- A quick wipe after use keeps limescale away
- Wash away dyes and oils after use
Wipe the bath dry after use where you can, particularly with hard water, and rinse away any product left on the surface.
Do not try to scrub a worn bath back to shine. It just wears the enamel further.
Landlord and trade work in Spittal of Glenshee
We work for landlords, letting agents and housing providers in Spittal of Glenshee as well as homeowners. Repairing between tenancies keeps void periods short, and it usually costs far less than a refit.
If you manage property in Spittal of Glenshee, we can repair and quote for several addresses together. Just send photos for each address and we’ll come back with a combined price.
How it works
Arrival times are agreed in advance. On site, it takes a full day. We leave the room clean and ready to use once it has cured.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
How to prepare
- Plan for the room to be out of bounds to pets and children
- Open a window if you can
- Tell us about parking, stairs or access
Get a quote
There is no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Advice
FAQs for Spittal of Glenshee
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as homeowners in Spittal of Glenshee.
I rent my home. Can I book you?
Of course. Ask your landlord first, and we can send them the quote if that helps.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Can you price it without visiting?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
Does re-enamelling smell?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
Can you do the outside of a roll-top?
Yes. Inside and out.
What do you need from me?
Photos of the damage, a picture of the entire bath and your postcode. Then we will agree a date.
Can you repair several things at once?
Of course, and it normally saves money. Just add the extra items to your pictures and you’ll get one combined price.
When a repair isn’t the answer
A repair isn’t always the answer, and we’d rather say so up front. Repairs won’t solve:
- Holes rusted through the metal
- Problems we can’t see until an old finish comes off
- A bath split right through the body
If in doubt, send pictures and we’ll say what we think before you book.
Materials we work on in Spittal of Glenshee
- Cast iron baths
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
About our accreditations · Every repair comes with a one-year guarantee.
