North Lanarkshire · Scotland
Bath re-enamelling & resurfacing in Springhill, North Lanarkshire
Fixed-price bath re-enamelling in Springhill and the surrounding area, usually in one visit.
- Resurfacing from £350
- Brown or grey marks that don’t clean off
- A coating lifting around the plughole
About our bath re-enamelling in Springhill
Many of the baths we re-enamel are period roll-tops, which would be difficult and expensive to replace. Doing them in place keeps an original feature. Our technicians work on Victorian roll-tops, basins & shower trays and acrylic baths, and people most frequently call us about a roll-top that’s seen better days and a dull, rough surface that won’t come clean.
All our work is covered by our one-year guarantee, wherever you are in North Lanarkshire.
- Where
- Springhill (ML7)
- Region
- North Lanarkshire
- Guarantee
- A year, on every repair
- Quote
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
What bath re-enamelling costs
Resurfacing from £350. Each job gets its own fixed quote. These are the things that affect it:
- Previous DIY repairs that have to come out
- The material and finish
- Doing more than one item at once
- Where the damage is and how we get to it
Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it.
Send pictures for a quote
Good photos mean an accurate price. Here’s what helps:
- Something in shot to show the size
- The material, if you know it
- Details of any past repairs
- A clear, close picture of the problem area
To get a price, send two or three photos through our quote form or ring us. We’ll say straight away if a repair is the right fix.
What happens on the day
We agree an arrival time beforehand. Once we’re there, the work takes a full day in most cases. The room is left tidy.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- The bath is left to cure and can usually be used the day after.
How to prepare
- Mention any parking restrictions or tricky access
- Mention any earlier repairs or resurfacing
- Keep pets and children out of the room while we work
Ask for a price
Upload a photo of the damage and a wider shot of the whole item, with your ML7 postcode, and we will reply with a fixed quote.
Advice
Aftercare tips
Looking after the surface is easy:
- Fix dripping taps quickly
- Do not let dyes or oils sit on the finish
- Have chips seen to early
- Use washing-up liquid and a soft cloth
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
Repairs by material
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. The bath needs to be firm and well supported.
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
DIY repairs versus a professional job
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
What a repair cannot fix
A repair is not right for every job, for example:
- A cast iron or steel bath that is cracked right through
- Problems we cannot see until an old finish comes off
- Acrylic that moves when you stand in it
If in doubt, send photos and we will say what we think before you book.
Surfaces we repair
- Acrylic baths
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
Other services in Springhill
About Springhill
Springhill is about 5 miles south-west of Whitburn, in North Lanarkshire. We visit clients in Springhill, so you don’t need to take anything anywhere. We work in 89 places in North Lanarkshire. We work right across the region, from Springhill to Glasgow (about 20 miles away).
All of ML7 is covered, from the main roads to the quietest streets. Whether you live on Stane Road, Manse Road and Main Street or anywhere nearby, a technician can come to you. Close by, we cover Torbothie (1 mile north), Burnbrae (1 mile west), Shotts (1 mile north-west), Fauldhouse (3 miles east) and Eastfield (3 miles north). We also work in nearby towns such as Motherwell (8 miles west), Cumbernauld (13 miles north-west), Coatbridge (10 miles west), Airdrie (9 miles north-west), Wishaw (6 miles south-west) and Bellshill (10 miles west).
Landmarks near Springhill
The nearest railway station is Shotts station, roughly 1.1 miles north-west. Nearby you will also find Shotts Heritage Centre (0.8 miles north-west) and Law Hospital (5 miles south-west). The countryside around Springhill includes Allanton House lake.
Springhill questions
Do you need to take the bath out?
Not at all. Everything is done in your bathroom, with the room protected and ventilated.
What information do you need?
Send pictures through the quote form or call 0345 017 0787.
Is there a guarantee?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
Is it OK to have pets in the house?
Yes, as long as they stay out of the room we’re working in. We will let you know when it’s safe to use again.
What does bath re-enamelling cost?
Prices start from £350. We give a fixed price based on pictures of the damage. Send a close-up and a picture of the entire item with your ML7 postcode.
Can tenants book a repair?
We can work for tenants, landlords or agents. Just make sure the landlord agrees.
Can you do the outside of a roll-top?
Yes. We can do the inside and outside if you’d like.
Can a failed resurfacing be redone?
In most cases. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
Common problems we fix in Springhill
By the time a bath is a few decades old, it may have a mix of issues: dull areas, chips, rust and staining. Resurfacing sorts them out together.
Common reasons people in Springhill contact us include:
- A coating lifting around the plughole
- Stains that will not shift
- Wear marks under the taps
- A roll-top that is seen better days
What to look for in a quote
- If travel is included in the price
- Is the price fixed, and does it include VAT?
- Who turns up on the day
- What protection goes down before work starts
Landlords, agents and businesses in Springhill
Letting agents frequently send us photos straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
We regularly work with letting and managing agents. Just send pictures, the address and how to get access and we’ll arrange it.
About our accreditations · Every repair comes with a one-year guarantee.
