Kent · England
Bath Re-enamelling for St Margaret's at Cliffe homes
We travel to St Margaret's at Cliffe for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- A bath in a colour that no longer suits
- A coating lifting around the plughole
What we cannot put right
It helps to know what we cannot do too:
- Anything hidden under an old coating, until we remove it
- Leaks from fittings rather than the bath
- A metal bath with a through crack
Send us pictures and we’ll tell you honestly.
Surfaces we repair
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
- Basins & shower trays
Bath re-enamelling at your home in St Margaret's at Cliffe
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. If you are dealing with staining under the taps and around the waste and chips and rust in more than one place, we can help.
Whatever the size of the job, it’s backed by a one-year guarantee in St Margaret's at Cliffe and across Kent.
- Area
- St Margaret's at Cliffe (CT15)
- Area hub
- Kent
- Cover
- One year on every repair
- Quote
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Repair or replace in St Margaret's at Cliffe?
When the bathroom is fine apart from the bath’s finish, re-enamelling is the least disruptive fix. Nothing else is disturbed. Prices start from £350. Rather than charging by the hour, we price the whole job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.
What you get with us
- Straight answers about what a repair can do
- One visit for most repairs
- Colour mixed on the day to match
- Everything repaired in place
Read our prices page or bath cost comparison.
Signs you need bath re-enamelling in St Margaret's at Cliffe
A dull surface stains and holds dirt, and scrubbing it wears it down further. That’s the point where re-enamelling makes sense.
Common reasons people in St Margaret's at Cliffe contact us are:
- Staining under the taps and around the waste
- An original cast iron bath that needs restoring
- Enamel that is lost its shine and feels rough
- A coating lifting around the plughole
Before you book anyone
- Whether the colour is mixed to match
- Is the price fixed, and does it include VAT?
- How your room will be protected
- How to care for the finish
Questions from St Margaret's at Cliffe
Can you quote from pictures?
Yes, almost always. Clear photos let us give you a fixed quote without visiting.
Is there a guarantee?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time that suits you.
How soon can you come?
Your quote comes with available dates. Tell us if you need it done quickly.
Is repairing better than replacing?
Typically, if the item is otherwise sound. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.
Can you make a coloured bath white?
Yes, most people go for white. Mention the colour you want when you send photos.
Which areas do you work in?
We work UK-wide, so St Margaret's at Cliffe is covered. Prices don’t change with location.
How long will the bath be out of use?
Typically a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
What we do, step by step
Your technician turns up at the time we agreed with you, introduces themselves and checks the damage against your photos first. The floor and nearby surfaces are covered before we open a single tin. Most visits take a full day, and the room is left clean and tidy.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the next day.
How to prepare
- Keep pets and children out of the room while we work
- Mention any parking restrictions or tricky access
- Have somewhere for us to park nearby if possible
How to get a price
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, include your postcode and send them to us. You will get a fixed quote, not an estimate.
Related advice
Materials and what they mean for the repair
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
What bath re-enamelling costs
Resurfacing from £350. There are no hourly rates or hidden extras. The price is based on:
- Any earlier repairs that need removing first
- Whether we combine several jobs
- The size and number of damaged areas
- Whether it’s a chip, crack, burn or wear
A repair usually costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
How to get a fixed quote
You can typically get a fixed price without us visiting. To help us price it:
- Something in shot to show the size
- Your postcode, so we can check dates
- Daylight if possible, and no flash reflection
- One picture of the whole bath
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
For landlords and businesses
For developers and builders, we fix damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.
Hospitality businesses cannot afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
DIY kit or professional repair?
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.
Our work in St Margaret's at Cliffe
St Margaret's at Cliffe is about 3 miles east of Dover, in Kent. Book a date that suits you, and we’ll give you an arrival time in advance, so you’re not left waiting in all day. St Margaret's at Cliffe is one of 922 towns and villages in Kent where we work. Our nearest city page is London, about 68 miles away.
Jobs in CT15 are booked in the same way as anywhere else. You’ll find streets such as High Street, Station Road and Chapel Lane. Nearby, we also work in West Cliffe (1 mile west), Martin Mill (2 miles north-west), East Langdon (2 miles north-west), Martin (2 miles north-west) and Ringwould (2 miles north). Larger places within reach include Canterbury (15 miles north-west), Dover (3 miles west), Folkestone (10 miles south-west), Ramsgate (13 miles north), Broadstairs (15 miles north) and Deal (4 miles north).
Landmarks near St Margaret's at Cliffe
Around St Margaret's at Cliffe, we work in homes near St Margaret's-at-Cliffe Primary School, Duke of York's Royal Military School and Church of St Margaret. The nearest railway station is Martin Mill station, about 1.6 miles north-west of the centre. A little further out are St Margaret's Museum (0.6 miles south-east) and Dover Castle (2.8 miles south-west). Not far away are Dover Western Heights.
Towns and villages near St Margaret's at Cliffe
What else we do in St Margaret's at Cliffe
About our accreditations · Every repair comes with a one-year guarantee.
