Shropshire · England
Bath Re-enamelling in Stanton upon Hine Heath
Bath re-enamelling in Stanton upon Hine Heath without the cost of replacing. Send us pictures for a fixed price, then we come to you.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- Wear marks under the taps
How we handle bath re-enamelling in Stanton upon Hine Heath
Re-enamelling gives a worn bath a new glossy surface without a refit. It suits baths that are dull, stained, rough or chipped all over. Typical jobs include worn patches where water runs and sits and a dull, rough surface that won’t come clean, on Victorian roll-tops, acrylic baths and basins & shower trays.
Your repair is guaranteed for a year, as with every job we do.
- Area
- Stanton upon Hine Heath (SY4)
- County
- Shropshire
- Cover
- One year on every repair
- Quotes
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Covering Stanton upon Hine Heath
Stanton upon Hine Heath is about 8 miles north-east of Shrewsbury, in Shropshire. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Stanton upon Hine Heath is one of 433 places in Shropshire where we work. Our nearest city page is Birmingham, about 39 miles away.
Postcode districts we cover here: SY4. Whether you live on Church Road, Church Lane and Booley Road or anywhere nearby, we can come to you. We also cover the places around Stanton upon Hine Heath: Preston Brockhurst (2 miles west), Lee Brockhurst (2 miles north-west), Weston-under-Redcastle (3 miles north), Aston (4 miles north-west) and Prees Green (5 miles north). We also work in nearby towns such as Shrewsbury (8 miles south-west), Madeley (14 miles south-east), Market Drayton (9 miles north-east), Coleham (9 miles south-west), Kingsland (9 miles south-west) and Whitchurch (11 miles north).
Landmarks near Stanton upon Hine Heath
Around Stanton upon Hine Heath, we work in homes near Church of St Andrew and the streets around them. The nearest railway station is Yorton station, about 4 miles west of the centre. A little further out are Moreton Corbet Castle (0.7 miles south-west). Green spaces nearby include Hawk Lake.
When we’d advise against a repair
A repair is not right for every job, for example:
- Plumbing leaks, which need a plumber
- Anything hidden under an old coating, until we remove it
- Steel that has corroded right through
Send us photos and we’ll tell you honestly before booking.
Materials we repair
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
What we’re called out for in Stanton upon Hine Heath
Enamel wears gradually. Abrasive cleaners, limescale and years of use wear the gloss away, generally first under the taps and around the waste.
Contact us if you’ve noticed any of these:
- A peeling or bubbling previous coating
- Staining under the taps and around the waste
- Wear marks under the taps
- A dull, rough surface that won’t come clean
Questions to ask before you book
- Whether they match the colour on site
- How the room is protected while they work
- How long the guarantee is and what it covers
- Who turns up on the day
Should I try a DIY kit first?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
How the visit works
The work is clean and fairly quiet. Protection goes down first, then the work takes a full day. Before we leave, we explain the curing time and the aftercare.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the next day.
Before we arrive
- Let us know which floor the room is on
- Clear toiletries, mats and anything else from around the area
- Mention any parking restrictions or tricky access
Ask for a price
To get a price, send a couple of photos using our quote form or ring us. We will say immediately if a repair is the right fix.
Advice
Repair or replace in Stanton upon Hine Heath?
A replacement frequently means several trades over several days. Re-enamelling is one technician, normally one day. Prices start from £350. Compared with replacing, a repair is usually a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
Why book with us
- Every repair guaranteed for a year
- We will tell you if it’s not worth repairing
- Colour mixed on the day to match
- CHAS, Constructionline and SafeContractor accredited
Read our pricing or resurfacing vs replacement cost guide.
Places near Stanton upon Hine Heath
Other services in Stanton upon Hine Heath
Your questions about bath re-enamelling in Stanton upon Hine Heath
Are you a vetted contractor?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
It’s been repaired before. Can you still fix it?
Most of the time. Tell us what was done before and we’ll plan for it.
Can tenants book a repair?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
How quickly can you book me in?
That depends on our diary for your area. Send photos with your postcode and we’ll reply with the earliest dates.
Can landlords book you?
Yes, often. We quote for multiple addresses and fit around tenancy changeovers.
What does bath re-enamelling cost?
Prices start from £350. We give a fixed price based on photos of the damage. Send a close-up of the damage and a wider photo with your SY4 postcode.
Will you leave a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Can you price it without visiting?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
Landlord and trade work in Stanton upon Hine Heath
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit.
Materials and what they mean for the repair
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
How to look after the repair
Looking after the surface is easy:
- Do not let dyes or oils sit on the finish
- Wipe the bath dry after use in hard water areas
- Keep suction mats out of the bath
- A dripping tap should be fixed promptly
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
If a previous coating is starting to peel, don’t pick at it. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
About our accreditations · Every repair comes with a one-year guarantee.
