Bath and North East Somerset · England
Bath re-enamelling & resurfacing in Chelwood, Bath and North East Somerset
Problem with your bath in Chelwood? We repair it in place, match it on site and back it with a one-year guarantee.
- Resurfacing from £350
- Chips and rust in more than one place
- A coloured bath you want in white
Looking after it afterwards
Once the work has cured, treat it gently:
- Don’t use the bath until it has fully cured
- Use washing-up liquid and a soft cloth
- Keep suction mats out of the bath
- Don’t leave bottles, razors or sponges standing on the surface
Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Repair dripping taps promptly.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
Bath re-enamelling in Chelwood, done in place
After cleaning, repairing and priming, we spray on the new finish. The preparation is what makes it last, and we take our time over it. We work on acrylic baths, cast iron baths and Victorian roll-tops, and people most frequently call us about thin, worn enamel in places and lots of chips and rust spots.
Peace of mind is built in: each job carries a one-year guarantee, and we explain what it covers before you book.
- Area
- Chelwood (BS39)
- Area hub
- Bath and North East Somerset
- Guarantee
- A year, on every repair
- Quotes
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Chelwood: your questions answered
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.
Do you cover Chelwood?
Yes. We cover the entire UK and travel to Chelwood. Send us photos for a fixed quote, or call 0345 017 0787.
How quickly can you book me in?
We will give you dates with your quote. If it’s urgent, say so and we will do what we can.
Is it worth repairing rather than replacing?
Usually, if the item is otherwise sound. A repair avoids removal and making good. We will tell you honestly if replacement makes more sense.
Which areas do you work in?
Across the UK, so Chelwood is covered. Our prices are the same everywhere.
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as homeowners across Bath and North East Somerset.
How do I book?
Some pictures, your postcode and how to reach you. On the day, we only need access to the room.
Can pets and children be at home?
On the day, the room should be kept clear of pets and children, mainly so nothing gets touched before it has cured.
Work for landlords and builders
We are used to working with agents and managing companies. Just send photos, the address and how to get access and we’ll handle the rest.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
Nearby places to Chelwood
What else we do in Chelwood
Common problems we fix in Chelwood
Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. After years of use, the surface becomes porous and stains easily.
The most common problems we’re called about are:
- Enamel that is lost its shine and feels rough
- Staining under the taps and around the waste
- Chips and rust in more than one place
- A coloured bath you want in white
What your quote should include
- Whether the colour is mixed to match
- How the room is protected while they work
- If travel is included in the price
- Who will actually do the work
DIY repairs versus a professional job
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
Should you replace it?
Getting a cast iron bath out is hard work: it’s very heavy, may need breaking up, and the replacement can be costly. Re-enamelling avoids all of it. Resurfacing from £350, with every job priced individually. There are no surprise extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Why us?
- Colours mixed by hand to suit your surface
- Work done at your home or business
- Accredited with CHAS, Constructionline and SafeContractor
- No extra charge for your area
See our prices page or bath cost comparison.
The process
On the day, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. Expect it to take a full day. We tidy up before we leave and let you know when you can use it again.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Point us to the nearest place to park
- Keep pets and children out of the room while we work
- Tell us about any previous repairs or coatings
Ask for a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them to us. What comes back is a fixed quote, not a guess.
Advice
How we price bath re-enamelling
Resurfacing from £350. You won’t pay by the hour. The price is based on:
- Whether old repairs or coatings need taking off
- The material and finish
- How many items we do on one visit
- The type of damage
Our prices are the same across the UK, with no extra for Chelwood. The job itself decides the price: how much damage, what it’s made of and how many items.
Send photos for a quote
The better the photos, the more accurate the price. Here’s what we find most useful:
- Your postcode, so we can check dates
- A clear, close picture of the problem area
- A coin beside the damage so we can judge size
- What it’s made of, if you know
Pricing is simple: snap the damage close up and then the whole item, send them over with your postcode, and we’ll reply with a fixed price. Quotes are free and no obligation.
Where we work around Chelwood
Chelwood is about 4 miles south of Keynsham, in Bath and North East Somerset. Clients in Chelwood get the same service as everywhere else we cover: a fixed quote from your photos, and a technician at your door on the day. Chelwood is one of 136 places in Bath and North East Somerset we cover.
Here we cover the BS39 postcode area. If you’re just outside Chelwood, we cover Stanton Wick (1 mile west), Breach (1 mile south-west), Pensford (1 mile north-west), Clutton Hill (1 mile south) and Woollard (2 miles north). Larger places within reach include Bath (7 miles east), Keynsham (4 miles north), Bathwick (8 miles east), Walcot (8 miles east), Westmoreland (6 miles east) and Kingsmead (7 miles east).
Landmarks near Chelwood
Typical jobs here are in homes near Church of St Leonard. Chelwood’s nearest station is Keynsham station, roughly 4.5 miles north of the centre. Well-known places in the area include Oval enclosure (2.9 miles south-west) and Paulton Memorial Hospital (4.2 miles south). The countryside around Chelwood includes Hunstrete Lake and Stephen's Vale Nature Reserve.
Repairs by material
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. The bath needs to be firm and well supported for the finish to last.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
About our accreditations · Every repair comes with a one-year guarantee.
