North Yorkshire · England
Bath Re-enamelling for Stean homes
Problem with your bath in Stean? We repair it in place, match it on site and back it with a one-year guarantee.
- Resurfacing from £350
- A roll-top that’s seen better days
- Several chips and rust patches
Our work in Stean
Stean is about 14 miles west of Ripon, in North Yorkshire. Across the HG3 area, a technician comes to you. Stean is one of 626 places in North Yorkshire where we work. Our nearest city page is Leeds, about 27 miles away.
Our visits in HG3 are booked in the same way as anywhere else. Close by, we cover Heathfield (5 miles south-east), Wath (5 miles south-east), Braidley (5 miles north-west), Silver Hill (6 miles south-east) and Greenhow (6 miles south). Further out, we also cover Skipton (15 miles south-west), Ripon (14 miles east), Bedale (14 miles north-east), Aiskew (15 miles north-east), Grassington (8 miles south-west) and Embsay (13 miles south-west).
What’s near Stean
Typical jobs here are in homes near Crown Hotel and Church of St Chad and the streets around them.
Bath re-enamelling at your home in Stean
Many of the baths we re-enamel are period roll-tops, which are heavy, hard to move and costly to replace. Resurfacing them in place keeps the original bath. Typical jobs include a bath that stays dull however much you clean it and wear marks under the taps, on pressed steel baths, cast iron baths and acrylic baths.
We stand behind the work with a one-year guarantee, so you are not left on your own once we have gone.
- Area
- Stean (HG3)
- County
- North Yorkshire
- Warranty
- A year, on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Do you need bath re-enamelling in Stean?
Frequently the bath has just had decades of use, with nothing wrong except the surface. The body of the bath is normally perfectly sound.
You may need us if you’ve spotted:
- A bath in a colour that no longer suits
- An old resurfacing that is failing
- Enamel that is lost its shine and feels rough
- Brown or grey marks that do not clean off
What to look for in a quote
- Whether the colour is mixed to match
- Whether there are any call-out or travel charges
- How your room will be protected
- What happens if they find more damage
Places near Stean
Also in Stean
Honest limits
We’d rather lose a job than do one that won’t last, so these are the limits:
- Acrylic that moves when you stand in it
- A cast iron or steel bath that’s cracked right through
- Holes rusted through the metal
If in doubt, send pictures and we will say what we think.
Materials we work on in Stean
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
How we price bath re-enamelling
Resurfacing from £350. There’s no area surcharge for Stean. The price reflects:
- Whether we combine several jobs
- Whether it’s a chip, crack, burn or wear
- How easy the damage is to reach
- The size and number of damaged areas
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send pictures and you’ll get a fixed figure.
Send pictures for a quote
We price nearly every job from photos. This is what we need:
- The postcode, so we can plan the visit
- Whether it’s been repaired or coated before
- A photo taken from further back
- Daylight if possible, and no flash reflection
Most clients in Stean get their price from photos. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
The process
Your technician turns up at the time we agreed with you, introduces themselves and looks over the damage before anything else. The floor and nearby surfaces are covered before any work starts. The work itself takes a full day, and we leave the room as we found it.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- Several coats of new finish are sprayed on.
- Once cured, normally by the day after, the bath is ready.
Preparing for the visit
- Keep pets and children out of the room while we work
- Let us know about parking or access
- Ensure the room can be ventilated
How to get a price
Send us a picture of the damage and one of the whole item, and tell us you are in Stean, and we’ll come back with a fixed quote.
Advice
Repair or replace in Stean?
Replacing a bath can take several days across several trades. Resurfacing takes one technician and usually a day, and the bath is usable the day after. Our bath re-enamelling starts from £350. What it costs depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. You get a fixed quote from your pictures, so there are no surprises on the day.
Why Stean customers choose us
- Colours mixed by hand to suit your surface
- Straight answers about what a repair can do
- One visit for most repairs
- Fixed prices from your pictures
See our pricing and bath cost comparison.
Stean: your questions answered
Do you work for landlords and businesses?
Yes, often. We quote for multiple addresses and fit around tenancy changeovers.
Will the price change on the day?
We stop, show you and agree any change before carrying on. You won’t be charged for anything you haven’t agreed.
How do I get a price for bath re-enamelling in Stean?
Resurfacing from £350. The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.
Is my repair covered?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
How long is the bath unusable?
One day for most baths, ready the day after. We give you timings with the quote.
Can you resurface a pink bath in white?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Do you come to Stean?
Yes, we do. Repair technicians travel to Stean from across the region, with no extra charge for travel.
DIY kit or professional repair?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
How to care for the repair
It’s all simple stuff, just a few sensible habits:
- Avoid suction-cup mats
- Dry the bath after use to stop limescale
- Keep toiletries on a shelf rather than in the bath
- Respect the curing time we give you
Wipe the bath dry after use where you can, particularly with hard water, and rinse off any bath products.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
Materials and what they mean for the repair
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
About our accreditations · Every repair comes with a one-year guarantee.
