Herefordshire · England
Bath Re-enamelling in Steen's Bridge
Problem with your bath in Steen's Bridge? We put it right where it is, match it on site and back it with a one-year guarantee.
- Resurfacing from £350
- Enamel that is lost its shine and feels rough
- A coloured bath you want in white
How we price bath re-enamelling
Resurfacing from £350. You will not pay by the hour. The price is based on:
- The material
- Previous DIY repairs that have to come out
- Unusual colours or finishes
- Whether it’s a chip, crack, burn or wear
A repair generally costs much less than people expect, especially compared with replacing and refitting. Send photos and we’ll give you the exact figure.
Quotes from your pictures
Two or three clear photos are generally enough. Try to include:
- A wider photo showing the whole bath
- The material, if you know it
- Something in shot to show the size
- Good light, ideally daylight, without flash glare
Getting a price is easy: take a close-up of the damage and a picture from further back, send them to us with your postcode, and we will reply with a fixed price. Quotes are free and you are under no obligation.
About our bath re-enamelling in Steen's Bridge
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. Typical jobs include lots of chips and rust spots and thin, worn enamel in places, across basins & shower trays, acrylic baths and cast iron baths.
All of our repairs are guaranteed for twelve months. We return to put right any problem with the work.
- Location
- Steen's Bridge (HR6)
- County
- Herefordshire
- Cover
- A year, on every repair
- Price
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
DIY repairs versus a professional job
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
What we cannot put right
It helps to know what we can’t do too:
- Leaking taps or wastes (a plumber’s job)
- Acrylic that moves when you stand in it
- Damage hidden under a previous coating, until it’s stripped back
Send us pictures and we’ll tell you honestly.
Materials we repair
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
Our work in Steen's Bridge
Steen's Bridge is about 11 miles north of Hereford, in Herefordshire. Book a date that suits you, and we will give you an arrival time in advance, so you’re not left waiting in all day. Our repair technicians cover all 255 towns and villages across Herefordshire, from the larger towns to small villages. You can also see our page for Birmingham, about 37 miles away.
All of HR6 is covered, from the main roads to the quietest streets. We regularly work on streets such as Worcester Road and Humber Close and the roads around them. Close by, we cover Stoke Prior (1 mile south-west), Docklow (2 miles east), Eaton (2 miles west), Wharton (2 miles south-west) and Ford (3 miles south-west). Further out, we also cover Hereford (11 miles south), Leominster (3 miles west), Redhill (12 miles south), Newton Farm (12 miles south), Whitecross (11 miles south) and Eign Hill (11 miles south).
Near you in Steen's Bridge
In Steen's Bridge, that means homes near Church of St Mary and Stoke Prior Primary School, among other places. Steen's Bridge’s nearest station is Leominster station, roughly 2.7 miles west of the centre. Other landmarks nearby include Comfort Castle (2.7 miles north-west). The countryside around Steen's Bridge includes Dinmore Hill.
Repair or replace in Steen's Bridge?
Replacing a bath typically involves a plumber, a fitter and a tiler. Re-enamelling takes one technician and generally one day, with the bath ready the next day. Prices start from £350. The price reflects the work involved, not where you live. You’ll see the full price before booking.
Why Steen's Bridge customers choose us
- CHAS and Constructionline accredited
- One-year guarantee on every repair
- We leave the room as we found it
- Fixed prices from your pictures
Take a look at our pricing and guide to resurfacing and replacement costs.
What we do, step by step
We turn up when we said we would and looks over the damage before anything else. Dust sheets and masking tape go down before any work starts. Most visits take the best part of a day, and we leave the room as we found it.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s generally ready the day after.
Before we arrive
- Move bottles, mats and clutter away from the area
- Keep children and pets away from the room on the day
- Tell us about any previous repairs or coatings
Get a quote
We price from pictures so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Advice
Work for landlords and builders
We regularly work with letting and managing agents. Just send photos, the address and how to get access and we will handle the rest.
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Materials and what they mean for the repair
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s the part we put right.
FAQs for Steen's Bridge
Is it worth repairing rather than replacing?
Typically, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. We’ll tell you honestly if replacement makes more sense.
Can you repair something that is been repaired before?
Yes, regularly. Removing the old work can add time, and that is in the quote.
Is the work guaranteed?
Yes, for a year. If there is a problem with the work in that time, we come back and put it right.
Does the bath have to be removed?
No. It’s re-enamelled where it stands, so the tiles and taps stay put.
What happens next?
We look at the photos and reply with a fixed price and some dates. If anything’s unclear, we’ll ask for another photo.
When can you do it?
That depends on our diary for your area. We will offer you dates when we send your quote.
Will it make a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
Can I get a quote without a visit?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
Signs you need bath re-enamelling in Steen's Bridge
Once enamel loses its gloss, it stains more easily, and scrubbing it wears it down further. At that stage, resurfacing is the fix.
Typical reasons for a call-out include:
- Chips and rust in more than one place
- An outdated colour you’d like to change
- An original cast iron bath that needs restoring
- Thin, worn enamel in places
What your quote should include
- How soon you can use it again
- How the room is protected while they work
- Is the price fixed, and does it include VAT?
- How changes to the job are handled
Also in Steen's Bridge
About our accreditations · Every repair comes with a one-year guarantee.
