Swansea · Wales
Bath Re-enamelling for Tirdeunaw homes
Full bath re-enamelling and resurfacing for homeowners, landlords and businesses in Tirdeunaw. Send pictures for a free, fixed quote.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- Staining under the taps and around the waste
Our work in Tirdeunaw
Tirdeunaw is about 1 mile south-west of Morriston, in Swansea. From the centre of Tirdeunaw to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Tirdeunaw is one of 153 places in Swansea we cover.
Jobs in SA5 and SA6 are booked in the same way as anywhere else. We regularly work on streets such as Solva Road, Penlan Road and Moriah Road and the roads around them. Close by, we cover Treboeth (1 mile south), Mynydd-Bach (1 mile north-east), Waun-gron (1 mile south), Trewyddfa (1 mile east) and Clase (1 mile north). Within a short drive, we also cover Gorseinon (4 miles west), Uplands (3 miles south), Sandfields (3 miles south), Brunswick (3 miles south), Cwm Gwyn (3 miles south-west) and Llwchwr (4 miles west).
What’s near Tirdeunaw
Our clients here include homes close to Mynyddbach Chapel, Bishop Vaughan R.C. School and Cwm Level Park. Nearby too are Clase Primary School (0.5 miles north-east) and The Eagle Inn (less than half a mile south). Tirdeunaw’s nearest station is Swansea station, roughly 2.2 miles south. Other landmarks nearby include Morriston Hospital (1.8 miles north) and Original Swansea Castle (2.5 miles south). Open spaces near Tirdeunaw include Mynydd Cadle Common and Pluck Lake.
Bath re-enamelling in Tirdeunaw without replacing anything
Re-enamelling gives a worn bath a new glossy surface without a refit. It’s the answer when the entire bath is tired rather than one spot. We regularly repair Victorian roll-tops, cast iron baths and pressed steel baths, and people most frequently call us about brown or grey marks that don’t clean off and enamel that’s lost its shine and feels rough.
Every job is backed for twelve months in Tirdeunaw and everywhere else. We return to put right any problem with the work.
- Location
- Tirdeunaw (SA5, SA6)
- Region
- Swansea
- Cover
- A year, on every repair
- Price
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
What happens on the day
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, protect the area, then carry out the work, which generally takes most of the day. If anything looks different from your photos, we will talk to you before going ahead.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
Before we arrive
- Tell us about parking, stairs or access
- Clear toiletries, mats and anything else from around the area
- Let us know which floor the room is on
Get a quote
Email us a picture of the damage and one of the whole item, with your SA5 postcode, and we will reply with a fixed price.
Read more
Should I try a DIY kit first?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
FAQs for Tirdeunaw
Is the work guaranteed?
Every repair comes with a one-year guarantee. We will explain what it covers when we quote.
Do you need to take the bath out?
No, it stays where it is. We work on the bath in place, with the room protected and ventilated.
Is it messy?
No. The work area is masked and covered, and we leave the room clean.
Do you work in Tirdeunaw?
Yes. We work across the UK and come to Tirdeunaw and the rest of Swansea. Send photos and we will quote, or call 0345 017 0787.
How durable is a resurfaced bath?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.
Do you charge for travel?
Travel is included in the price, and we charge the same wherever you are.
Is it worth repairing rather than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it isn’t worth repairing, we’ll tell you.
How long does re-enamelling take?
Most baths are done in a day, ready the next day. We give you timings with the quote.
Repair or replace: which is better?
Replacing a bath typically involves a plumber, a fitter and a tiler. Resurfacing is one technician, normally in a day, and the bath can be used the day after. Prices start from £350. There are no surprise extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Why book with us
- Free fixed quotes from pictures
- CHAS, Constructionline and SafeContractor accredited
- We come to you, anywhere in the UK
- A year’s guarantee on all work
See our pricing and bath cost comparison.
Different materials, different repairs
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.
Landlords, agents and businesses in Tirdeunaw
Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so most of our work is done in a single visit. We will fit around changeovers where we can.
We are used to working with agents and managing companies. Send the address, pictures and access details and we will arrange it.
Signs you need bath re-enamelling in Tirdeunaw
By the time a bath is a few decades old, it may have a mix of issues: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.
Typical reasons for a call-out include:
- An original cast iron bath that needs restoring
- Enamel that’s lost its shine and feels rough
- Stains that will not shift
- Several chips and rust patches
Comparing quotes
- Whether the colour is mixed to match
- What happens if they find more damage
- Who turns up on the day
- Whether the price is fixed and includes VAT
Keeping it looking good
Much of the damage we repair could have been avoided. A few tips:
- Wash away dyes and oils after use
- Avoid suction-cup mats
- Fix dripping taps quickly
- Clean with a soft cloth and mild detergent
Wipe the bath dry after use where you can, especially in hard water areas, and rinse away any product left on the surface.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further.
When a repair is not the answer
Not everything can be repaired, and we would rather say so up front. We cannot fix:
- A cast iron or steel bath that’s cracked right through
- Steel that has corroded right through
- Anything hidden under an old coating, until we remove it
Not sure? Send photos and we will give you a straight answer.
What we work on
- Cast iron baths
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
Also in Tirdeunaw
About our accreditations · Every repair comes with a one-year guarantee.
