Pembrokeshire · Wales

Bath re-enamelling & resurfacing in Llanrhian, Pembrokeshire

Fixed-price bath re-enamelling in Llanrhian and the surrounding area, normally in one visit and guaranteed for a year.

  • Resurfacing from £350
  • A period or roll-top bath worth keeping
  • Stains that will not shift
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling near Llanrhian

Landlord and trade work in Llanrhian

For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit.

We work for landlords, letting agents and housing providers in Llanrhian as well as householders. Repairing between tenancies keeps void periods short, and it generally costs far less than a refit.

How we handle bath re-enamelling in Llanrhian

Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. Typical jobs include stains that won’t shift and lots of chips and rust spots, on pressed steel baths, cast iron baths and acrylic baths.

A one-year guarantee comes with the work, just as it does everywhere we cover.

Location
Llanrhian (SA62)
Area hub
Pembrokeshire
Cover
One year on every repair
Quotes
From £350. Free, fixed price from pictures
Phone
0345 017 0787
Page updated
23 October 2026
Stained basin resurfaced to clean white (before and after)

Repairing versus replacing in Llanrhian

If you like your bathroom but not your bath’s surface, re-enamelling is the least disruptive fix. Tiles, panels and taps stay put. Resurfacing from £350, with every job priced individually. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send pictures and we will give you the exact figure.

Why book with us

  • One-year guarantee on every repair
  • CHAS, Constructionline and SafeContractor accredited
  • Same prices wherever you are
  • Most jobs done in one visit

Read our prices page and resurfacing vs replacement cost guide.

Prices and what affects them

Prices start from £350. We don’t charge extra for travel to Llanrhian. The price comes down to:

  • Whether old repairs or coatings need taking off
  • Whether it’s a chip, crack, burn or wear
  • Where the damage is and how we get to it
  • How many areas need work

There are no surprise extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.

Getting a price from pictures

Good photos mean an accurate price. Here’s what helps:

  • The material, if you know it
  • A coin or ruler next to the damage for scale
  • A picture taken from further back
  • Whether it’s been repaired or coated before

Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them over. You will get a fixed quote, not an estimate.

Where we work around Llanrhian

Llanrhian is about 13 miles north-west of Haverfordwest, in Pembrokeshire. Clients in Llanrhian get the same service as everywhere else we cover: a fixed quote from photos, and a technician at your door on the day. Llanrhian is one of 223 places in Pembrokeshire where we work.

All of SA62 is within our area. That includes homes on Heol Rhian and Llanrhian Road and the roads around them. We also cover the places around Llanrhian: Porthgain (1 mile north), Croes-goch (1 mile south-east), Trefin (1 mile north-east), Penparc (2 miles east) and Y Sgwâr (2 miles east). We also work in nearby towns such as Haverfordwest (13 miles south-east), The Marsh (13 miles south-east), Fishguard (9 miles north-east), Goodwick (9 miles north-east), Fishguard and Goodwick (9 miles east) and Penyraber (9 miles north-east).

Near you in Llanrhian

Locally, our jobs take us to homes close to Church Of St Rhian and The Sloop Inn. Other landmarks nearby include Whitewell (5.7 miles south-west) and Y Castell (3.8 miles south). For a walk, there’s Ynys-fach.

Map of Llanrhian © OpenStreetMap contributors

How the visit works

On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job generally takes a full day. We clean up when we are done and let you know when you can use it again.

  1. We check the bath and agree the finish with you.
  2. Everything around the bath is masked and covered.
  3. We degrease the bath, fix any damage and key the surface.
  4. We apply the primer and then the finish coats.
  5. We remove the masking, tidy up and give you the curing time.

Getting ready for the visit

  • Open a window if you can
  • Let us know which floor the room is on
  • Ensure the area is dry

Getting a price

You don’t need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will reply with a fixed quote.

Get a fixed price

Related advice

Signs you need bath re-enamelling in Llanrhian

Hard water speeds up the wear, and abrasive cleaners do the most damage.

Get in touch if you’ve noticed:

  • A dull, rough surface that will not come clean
  • Wear marks under the taps
  • A coloured bath you want in white
  • Staining under the taps and around the waste

Before booking anyone

  • How to care for the finish
  • Who will actually do the work
  • The length of the guarantee and what it covers
  • Whether the colour is mixed to match

How to compare quotes

Materials and what they mean for the repair

Acrylic

We resurface acrylic baths as well, using a system that bonds to acrylic. It must be solid and not flex underfoot.

Roll-top and period baths

Freestanding roll-tops can be done inside and out, and the outside can be refinished too.

Should I try a DIY kit first?

If you do try a kit, read the instructions carefully, and give it the full curing time. If it does not work out, we can still repair it properly.

It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.

How to look after the repair

Once the work has cured, treat it gently:

  • Wipe the bath dry after use in hard water areas
  • Leave the bath for the full curing time before using it
  • Keep suction mats out of the bath
  • Keep toiletries on a shelf rather than in the bath

A quick rinse and wipe after use helps, especially in hard water areas, so limescale can’t build up.

Leave a peeling coating alone. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.

Common questions in Llanrhian

When can you do it?

We will give you dates with your quote. Tell us if you need it done quickly.

What happens if you find more damage?

It’s rare, but if it happens we talk to you first. The price only changes if you agree.

Do you need to take the bath out?

No. It’s re-enamelled where it stands, so nothing else is disturbed.

What information do you need?

Use the quote form or ring 0345 017 0787.

How long is the bath unusable?

One day for most baths, ready the day after. We will confirm timings when we quote.

Will it make a mess?

Very little mess: we sheet and mask everything nearby, and we leave the room clean.

Can landlords book you?

Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses.

Does re-enamelling smell?

Some odour is normal while we spray, so we ventilate the room. It clears as the finish cures.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.