Pembrokeshire · Wales
Bath Re-enamelling for Uzmaston and Boulston homes
Bath re-enamelling across Uzmaston and Boulston and nearby, done in a single visit in most cases.
- Resurfacing from £350
- A peeling or bubbling previous coating
- Lots of chips and rust spots
Bath re-enamelling at your home in Uzmaston and Boulston
We re-enamel plenty of period and roll-top baths, which would be difficult and expensive to replace. Doing them in place keeps an original feature. Our technicians work on cast iron baths, pressed steel baths and acrylic baths, and common reasons people contact us are chips and rust in more than one place and an old resurfacing that’s failing.
Big or small, it’s backed by a one-year guarantee in Uzmaston and Boulston and across Pembrokeshire.
- Area
- Uzmaston and Boulston (SA62)
- Region
- Pembrokeshire
- Warranty
- 12 months on all our work
- Price
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
DIY repairs versus a professional job
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
What we do, step by step
Arrival times are agreed in advance. On site, it takes the best part of a day for most jobs. The room is left tidy and ready to use once it has cured.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Clear toiletries, mats and anything else from around the area
- Let us know if it has been repaired before
- Ensure the room can be ventilated
Ask for a price
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed price.
Related advice
Why repair rather than replace?
Replacement only makes sense in a few cases: a cracked-through bath, a change of size or shape, or a full refit. Otherwise, resurfacing typically wins. Resurfacing from £350, with every job priced individually. There are no surprise extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
Why book with us
- CHAS, Constructionline and SafeContractor accredited
- No need to remove anything
- Dust sheets down, tidy finish
- Most jobs done in one visit
See our prices page or bath cost comparison.
Also near Uzmaston and Boulston
Other services in Uzmaston and Boulston
Do you need bath re-enamelling in Uzmaston and Boulston?
Enamel doesn’t fail overnight. Abrasive cleaners, limescale and years of use dull the surface, usually first under the taps and around the waste.
Keep an eye out for these signs:
- A period or roll-top bath worth keeping
- An outdated colour you’d like to change
- A peeling or bubbling previous coating
- A bath that stays dull however much you clean it
Questions to ask before booking
- What prep work is covered
- What the guarantee covers, and for how long
- How the colour is matched
- When it can be used again
How to look after the repair
Much of the damage we repair could have been avoided. A few tips:
- Dry the bath after use to stop limescale
- Leave the bath for the full curing time before using it
- Store bottles off the bath
- Keep suction mats out of the bath
Wipe the bath dry after use where you can, and rinse off any bath products.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
Uzmaston and Boulston and the surrounding area
Uzmaston and Boulston is about 2 miles east of Haverfordwest, in Pembrokeshire. Our technicians come to homes and businesses in Uzmaston and Boulston and the surrounding area, so you don’t need to take anything anywhere. We cover 223 places across Pembrokeshire.
Our visits in SA62 work the same way as everywhere else we cover. Close by, we cover Uzmaston (1 mile west), Boulston (2 miles south-west), Hook (2 miles south), Merlin's Bridge (2 miles west) and Deerland (2 miles south). Within a short drive, we also cover Milford Haven (7 miles south-west), Pembroke (8 miles south), Pembroke Dock (7 miles south), Dinbych-y-Pysgod (12 miles south-east), The Green (12 miles south-east) and Fishguard (14 miles north).
Near you in Uzmaston and Boulston
We visit homes around Church of Saint Ismael and Sir Thomas Picton School and the streets around them. Uzmaston and Boulston’s nearest station is Haverfordwest station, roughly 1.8 miles north-west. A little further out are Graham Sutherland Gallery (1.6 miles east) and Picton Castle (1.7 miles east). Open spaces near Uzmaston and Boulston include Slebech Park Lake and Boulston Hill.
When we would advise against a repair
A repair is not always the answer, and we will tell you before we start. We can’t fix:
- A metal bath with a through crack
- An acrylic bath that flexes badly underfoot
- A bath that is rusted through
Send us photos and we will tell you honestly.
What we work on
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
Materials and what they mean for the repair
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Landlords, agents and businesses in Uzmaston and Boulston
We carry out planned and one-off repairs for housing associations and facilities teams in Pembrokeshire and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
Builders use us to fix snagging damage before handover. We can visit several plots in one trip to keep costs down.
Your questions about bath re-enamelling in Uzmaston and Boulston
Can a failed resurfacing be redone?
Normally, yes. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
Do you work in Uzmaston and Boulston?
Yes, we do. Technicians travel to Uzmaston and Boulston from across the region, and the price is the same as everywhere else.
What happens once I’ve sent photos?
You get a fixed price and available dates. If anything’s unclear, we will ask for another photo.
Is my repair covered?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Is there any odour?
There can be some smell while we work, so we ventilate the room. It clears as the materials cure.
Can you resurface a pink bath in white?
Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Is it OK to have pets in the house?
Keep pets and children away from the work area on the day.
About our accreditations · Every repair comes with a one-year guarantee.
