Staffordshire · England

Bath re-enamelling & resurfacing in Wain Lee, Staffordshire

Local bath re-enamelling for Wain Lee: a fixed quote from pictures, a tidy visit and a one-year guarantee.

  • Resurfacing from £350
  • Wear marks under the taps
  • Stains that will not shift
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath re-enamelling in Wain Lee

How we handle bath re-enamelling in Wain Lee

We re-enamel a lot of period and roll-top baths, which would be difficult and expensive to replace. Doing them in place keeps an original feature. Common call-outs are for several chips and rust patches and a peeling or bubbling previous coating, in cast iron baths, Victorian roll-tops and pressed steel baths.

We guarantee the work for a year. If something isn’t right in that time, we come back and put it right.

Roll-top bath being refinished by a Surface Doctor technician
Where
Wain Lee (ST7)
County
Staffordshire
Warranty
One year on every repair
Price
From £350. Free, fixed quote from pictures
Phone
0345 017 0787
Page updated
23 October 2026

Prices and what affects them

Prices start from £350. A fixed quote means you know the cost before you book. We look at:

  • The material and finish
  • How hard the colour is to match
  • The size and number of damaged areas
  • How easy the damage is to reach

It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you’ll get a fixed figure.

How to get a fixed price

When you take your photos, a few simple things make all the difference:

  • A picture taken from further back
  • Natural light rather than flash
  • A close-up of the damage, in focus
  • Any details about the material

To get a price, send a couple of photos through our quote form or call us. We’ll say straight away whether it can be repaired.

How it works

Your technician turns up when we said we would, introduces themselves and looks over the damage before anything else. Dust sheets and masking tape go down before any work starts. The work itself takes most of the day, and the room is left clean and tidy.

  1. The bathroom is protected and ventilation set up.
  2. Old sealant is cut out and the bath is deep cleaned.
  3. Chips, rust and pitting are repaired.
  4. The surface is keyed and primed for the new finish.
  5. The new finish is sprayed on in several coats and left to cure.

How to prepare

  • Point us to the nearest place to park
  • Plan for the room to be out of bounds to pets and children
  • Avoid using the area for a few hours before we arrive

How to get a price

For a price in Wain Lee, pictures are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.

Send pictures for a quote

Advice

Wain Lee: your questions answered

Is my repair covered?

Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.

When can you do it?

It depends on the time of year and where you are. Send photos with your postcode and we’ll reply with the earliest dates.

Will there be fumes?

There is some smell while the coating is applied, which is why we ventilate the bathroom. It fades as the coating cures.

How long does re-enamelling last?

That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.

Do you need to take the bath out?

No. We resurface it in place, so the tiles and taps stay put.

What areas do you cover?

All of Staffordshire, and the rest of the UK. Travel is included in the price.

Do you hold any accreditations?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

Can you change the colour of my bath?

Yes, most people go for white. Mention the colour you want when you send photos.

What your bath is made of matters

Acrylic

Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.

Cast iron

Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.

What we can’t put right

Before you book, it’s worth knowing the limits too:

  • Steel that has corroded right through
  • A cast iron or steel bath that’s cracked right through
  • Plumbing leaks, which need a plumber

If in doubt, send photos and we will say what we think before booking.

What we work on

  • Acrylic baths
  • Basins & shower trays
  • Pressed steel baths
  • Victorian roll-tops
  • Cast iron baths

Can I fix it myself?

It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is generally the cheaper route.

A DIY attempt is not a disaster. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.

Looking after it afterwards

Simple care helps the repair last. We recommend:

  • Get any chip repaired quickly
  • A quick wipe after use keeps limescale away
  • Leave the bath for the full curing time before using it
  • Rinse off hair dye, oils and bath bombs immediately

Treat the new finish gently at first: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.

Rust spots on a worn bath get worse with time. Resurfacing before they spread keeps it simpler.

Landlords, agents and businesses in Wain Lee

Letting agents frequently send us pictures straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.

For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.

About Wain Lee

Wain Lee is about 2 miles south-west of Biddulph, in Staffordshire. Wherever you are in the ST7 postcode area, a technician comes to you. Wain Lee is one of 512 towns and villages in Staffordshire where we work. We work right across the region, from Wain Lee to Manchester (26 miles away).

Our visits in ST7 are booked in the same way as anywhere else. Neighbouring places we cover include Brown Lees (1 mile east), Newpool (1 mile north-east), Knypersley (1 mile north-east), Braddocks Hay (1 mile north-east) and Knowle Style (1 mile north-east). Within a short drive, we also cover Newcastle-under-Lyme (6 miles south), Longton (8 miles south), Stone (14 miles south), Leek (7 miles east), Alsager (5 miles west) and Cheadle (12 miles south-east).

Near you in Wain Lee

Around Wain Lee, we work in homes near Biddulph High School, Biddulph Valley Park and Church of St John the Evangelist. For rail, the closest station is Kidsgrove station, roughly 2.2 miles south-west. Nearby you’ll also find Mow Cop Chapel Museum (1 mile north-west) and Mow Cop Castle (1.1 miles north-west). Open spaces near Wain Lee include Westport Lake and Bignall Hill.

Map of Wain Lee © OpenStreetMap contributors

Signs you need bath re-enamelling in Wain Lee

Enamel does not fail overnight. Abrasive cleaners, limescale and years of use dull the surface, usually first under the taps and around the waste.

Most people get in touch after spotting one of these:

  • A coating lifting around the plughole
  • A roll-top that’s seen better days
  • A bath in a colour that no longer suits
  • Chips and rust in more than one place

Comparing quotes

  • Whether the colour is mixed to match
  • What protection goes down before work starts
  • Is the price fixed, and does it include VAT?
  • When it can be used again

10 questions to ask before booking

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.