Pembrokeshire · Wales
Bath re-enamelling & resurfacing in Walton West, Pembrokeshire
Full bath re-enamelling and resurfacing for homes and businesses in Walton West and across Pembrokeshire. Free, fixed quotes from your photos.
- Resurfacing from £350
- A bath in a colour that no longer suits
- A dull, rough surface that will not come clean
About our bath re-enamelling in Walton West
We don’t move the bath, so the taps, tiles and plumbing are not touched. It typically takes one visit, with the bath ready to use the following day. Whether it’s a period or roll-top bath worth keeping and wear marks under the taps, we can generally put it right.
A one-year guarantee comes as standard, so you’re not left on your own once we have gone.
- Where
- Walton West (SA62)
- Region
- Pembrokeshire
- Cover
- 12 months on all our work
- Price
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
What we are called out for in Walton West
Often the bath has just had decades of use. Underneath, a cast iron or steel bath is normally as strong as ever.
Typical reasons for a call-out include:
- Several chips and rust patches
- An old resurfacing that’s failing
- Staining under the taps and around the waste
- A period or roll-top bath worth keeping
Questions to ask before you book
- Whether the price covers travel
- Whether the colour is mixed to match
- What happens if the damage is worse than the pictures show
- How soon you can use it again
What a repair cannot fix
Some problems need a builder, plumber or fitter rather than us:
- A bath split right through the body
- A poorly supported acrylic bath, until it’s firmed up
- Holes rusted through the metal
If in doubt, send photos and we will say what we think.
What we work on
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
Materials and what they mean for the repair
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.
Landlords, agents and businesses in Walton West
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Letting agents often send us photos straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Also near Walton West
More services for Walton West
Looking after it afterwards
Much of the damage we repair could have been avoided. These habits help:
- Do not let dyes or oils sit on the finish
- Respect the curing time we give you
- Keep suction mats out of the bath
- Use washing-up liquid and a soft cloth
The first few days matter most: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
Why repair rather than replace?
For a sound bath, resurfacing costs far less than replacement, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s also far quicker. Prices start from £350. A repair is priced on what needs doing, not your postcode. The full price is agreed before you book, with no extras added later.
What you get with us
- Most jobs done in one visit
- Fixed prices from your photos
- Same prices wherever you are
- Accredited with CHAS, Constructionline and SafeContractor
Take a look at our full price list and guide to resurfacing and replacement costs.
The process
From the moment we arrive, we keep the work contained to the one room. We mask off everything nearby, the work takes the best part of a day, and we finish with a tidy-up and a look at the finished work together.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
Preparing for the visit
- Tell us about any previous repairs or coatings
- Tell us if there are stairs or a lift
- Keep pets and children out of the room while we work
Getting a price
You don’t need a survey visit. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.
Advice
Walton West: your questions answered
Can a failed resurfacing be redone?
In most cases. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
Do you come to Walton West?
Yes, we do. We send a technician to Walton West for every job, and the price is the same as everywhere else.
Can you re-enamel a roll-top bath?
Yes, often. The inside is resurfaced, and we can refinish the outside as well.
Can I get a quote without a visit?
Nearly always. We only ask to see it in person if the photos cannot show what we need.
What does bath re-enamelling cost?
Resurfacing from £350. Because every job differs, we price from pictures. You will get a fixed figure before booking.
Can you repair several things at once?
Yes. Doing several items on one visit generally costs less than separate visits. Send photos of everything you’d like done.
Will the new finish last?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
Is there a guarantee?
All our work carries our one-year guarantee. Ask us what it covers when you get your quote.
Prices and what affects them
Prices start from £350. There’s no area surcharge for Walton West. The price reflects:
- Access to the area
- The colour and finish to match
- How many items we do on one visit
- Whether old repairs or coatings need taking off
Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access, and combining items on one visit brings it down.
Getting a price from pictures
Before you send photos, these tips help us give you a firm price:
- Daylight if possible, and no flash reflection
- Any details about the material
- One sharp close-up of the damage
- Details of any past repairs
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.
Covering Walton West
Walton West is about 5 miles north-west of Milford Haven, in Pembrokeshire. Across the SA62 area, we come to you. Walton West is one of 223 towns and villages in Pembrokeshire we cover.
Every address in SA62 is covered, from the main roads to the quietest streets. Local streets include Walton Road and Walton Hill, all of which we cover. Close by, we cover Little Haven (1 mile west), Broad Haven (1 mile north), Hasguard Cross (2 miles south-west), Hasguard (2 miles south) and St Ishmael's (4 miles south-west). Larger places within reach include Haverfordwest (6 miles east), Milford Haven (5 miles south-east), Pembroke (11 miles south-east), Pembroke Dock (9 miles south-east), The Marsh (6 miles east) and Green (10 miles south-east).
Local landmarks in Walton West
We visit homes around Broad Haven C.P. School, The Castle pub and Church of All Saints and the streets around them. For rail, the closest station is Johnston station, about 4.6 miles east of the centre. A little further out are Walwyn’s Castle (1.4 miles south-east). Not far away are Hubberstown Pill and Borough Head.
About our accreditations · Every repair comes with a one-year guarantee.
