Pembrokeshire · Wales
Bath Re-enamelling in Broad Haven
Local bath re-enamelling for Broad Haven: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- An original cast iron bath that needs restoring
Where we work around Broad Haven
Broad Haven is about 5 miles north-west of Milford Haven, in Pembrokeshire. Jobs in Broad Haven are booked in like any other job: a fixed quote from pictures, then a visit to do the work. Our technicians cover all 223 towns and villages in Pembrokeshire.
Our visits in SA62 work the same way as everywhere else we cover. From Beachfields, Puffin Way and Wilson Meadow or a nearby road, we can come to you. We also travel to Walton West (1 mile south), Little Haven (1 mile south-west), Hasguard Cross (2 miles south), Hasguard (3 miles south) and St Ishmael's (4 miles south). Within a short drive, we also cover Haverfordwest (6 miles east), Milford Haven (5 miles south-east), Pembroke (11 miles south-east), Pembroke Dock (9 miles south-east), The Marsh (6 miles east) and Green (11 miles south-east).
Local landmarks in Broad Haven
Our customers here include homes close to Church of All Saints, Galleon Inn and Broad Haven C.P. School, among other places. The nearest railway station is Johnston station, about 4.8 miles east. Well-known places in the area include Walwyn’s Castle (1.8 miles south-east). Open spaces near Broad Haven include Borough Head.
How we handle bath re-enamelling in Broad Haven
Resurfacing renews the whole surface of the bath without taking anything out. It suits baths that are dull, stained, rough or chipped all over. Whether it’s a peeling or bubbling previous coating and staining under the taps and around the waste, we can help, on basins & shower trays, pressed steel baths and Victorian roll-tops alike.
We guarantee the work for a year. If there’s a problem with the repair within the year, we return and sort it.
- Where
- Broad Haven (SA62)
- Region
- Pembrokeshire
- Guarantee
- One year on every repair
- Price
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
DIY repairs versus a professional job
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.
Places near Broad Haven
More services for Broad Haven
Materials and what they mean for the repair
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Work for landlords and builders
For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip.
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
FAQs for Broad Haven
Will it make a mess?
No. The work area is masked and covered, and we take our waste away with us.
Will there be a smell?
Some materials have a smell while they’re applied. It clears as the materials cure.
Can you quote from photos?
Typically, yes. Clear photos let us give you a fixed quote without visiting.
Does someone need to be in?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Is my repair covered?
Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.
How do I get a price for bath re-enamelling in Broad Haven?
Prices start from £350. Because every job differs, we price from photos. You know the full cost before anything is booked.
Can you resurface a pink bath in white?
Yes, most people go for white. Mention the colour you want when you send photos.
Does re-enamelling smell?
Yes, while we are applying the finish. Ventilation keeps it down, and it fades as the finish cures.
When a repair is not the answer
Some problems need a builder, plumber or fitter rather than us:
- Anything hidden under an old coating, until we remove it
- A metal bath with a through crack
- Steel that has corroded right through
Not sure? Send photos and we will give you a straight answer before you book.
Surfaces we repair
- Basins & shower trays
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
Looking after it afterwards
Much of the damage we repair could have been avoided. These habits help:
- Have chips seen to early
- Use washing-up liquid and a soft cloth
- Rinse off hair dye, oils and bath bombs immediately
- Don’t leave bottles, razors or sponges standing on the surface
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
Prices and what affects them
Resurfacing from £350. A fixed quote means you know the cost before you book. We take into account:
- Unusual colours or finishes
- The size and number of damaged areas
- The material
- Whether it’s a chip, crack, burn or wear
A repair normally costs much less than people expect, especially compared with replacing and refitting. Send photos and we’ll give you the exact figure.
Getting a price from photos
Two or three clear photos are generally enough. It helps if you send:
- The postcode, so we can plan the visit
- Good light, ideally daylight, without flash glare
- One sharp close-up of the damage
- Any details about the material
Send us pictures of the damage and a wider shot of the whole item, and tell us you are in Broad Haven, and we’ll reply with a fixed price.
Why repair rather than replace?
Replacement only makes sense in a few cases: a cracked-through bath, a change of size or shape, or a full refit. Otherwise, resurfacing typically wins. Our bath re-enamelling starts from £350. Set against the cost of replacement, repairing typically costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
What you get with us
- Typically one visit, start to finish
- A year’s guarantee on all work
- Work done at your home or business
- Colour-matched on site
Take a look at our full price list and guide to resurfacing and replacement costs.
What happens on the day
It’s a tidy, low-fuss visit. We agree the arrival time in advance, protect the area, and get on with the job, which usually takes the best part of a day. If anything looks different from your pictures, we will talk to you before going ahead.
- We mask and protect the room and ventilate it.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- The bath is left to cure and can generally be used the day after.
Before we arrive
- Tell us about parking, stairs or access
- Make sure the room can be ventilated
- Avoid using the area for a few hours before we arrive
Getting a price
There is no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed quote.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
