Pembrokeshire · Wales

Bath Re-enamelling in Little Haven

Problem with your bath in Little Haven? We repair it in place, mix the colour on the day and back it with a one-year guarantee.

  • Resurfacing from £350
  • A roll-top that’s seen better days
  • Several chips and rust patches
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath re-enamelling in Little Haven

What your bath is made of matters

Cast iron

A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s what we repair.

Acrylic

Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.

Bath re-enamelling at your home in Little Haven

We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. Whether it’s an original cast iron bath that needs restoring and a peeling or bubbling previous coating, we can generally put it right, on pressed steel baths, Victorian roll-tops and cast iron baths alike.

You are covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before booking.

Where
Little Haven (SA62)
Area hub
Pembrokeshire
Warranty
A year, on every repair
Price
From £350. Free, fixed quote from pictures
Telephone
0345 017 0787
Last updated
23 October 2026
Surface Doctor technician refinishing the outside of a roll-top bath

Do you need bath re-enamelling in Little Haven?

Older baths often have several problems at once: worn patches, chips, rust spots and stains. Re-enamelling deals with all of them in one go.

Clients generally contact us about:

  • Worn patches where water runs and sits
  • An outdated colour you’d like to change
  • A bath that stays dull however much you clean it
  • An old resurfacing that’s failing

Questions to ask before you book

  • What preparation is included
  • How long it needs to cure
  • What protection goes down before work starts
  • Whether the price covers travel

10 questions to ask before you book

Repairing versus replacing in Little Haven

Getting a cast iron bath out is hard work: it’s very heavy, may need breaking up, and the replacement can be costly. Re-enamelling avoids all of it. Prices start from £350. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.

Why us?

  • Dust sheets down, tidy finish
  • Accredited with CHAS, Constructionline and SafeContractor
  • Work done at your home or business
  • Colours mixed by hand to suit your surface

Take a look at our full price list and guide to resurfacing and replacement costs.

Where we work around Little Haven

Little Haven is about 5 miles north-west of Milford Haven, in Pembrokeshire. Clients in Little Haven get the same service as everywhere else we cover: a fixed quote from pictures, then a visit to do the work. Little Haven is one of 223 places in Pembrokeshire we cover.

We work across the SA62 postcode area. You’ll find streets such as Grove Place, Walton Hill and Wesley Road. Close by, we cover Walton West (1 mile east), Broad Haven (1 mile north-east), Hasguard Cross (1 mile south), Hasguard (2 miles south) and St Ishmael's (4 miles south). Within a short drive, we also cover Haverfordwest (6 miles east), Milford Haven (5 miles south-east), Pembroke (11 miles south-east), Pembroke Dock (9 miles south-east), The Marsh (6 miles east) and Green (10 miles south-east).

Landmarks near Little Haven

Our clients here include homes close to Broad Haven C.P. School, The Castle pub and Church of All Saints, among other places. The nearest railway station is Johnston station, roughly 4.9 miles east of the centre. Further afield, we also cover the area around Walwyn’s Castle (1.5 miles south-east). Not far away are Hubberstown Pill and Borough Head.

Map of Little Haven © OpenStreetMap contributors

Aftercare tips

Looking after the surface is easy, and it makes a real difference:

  • Keep suction mats out of the bath
  • Keep toiletries on a shelf rather than in the bath
  • Wipe the bath dry after use in hard water areas
  • Fix dripping taps quickly

Use mild, non-abrasive cleaners, do not use suction bath mats, and keep bottles and razors off the surface.

The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.

Little Haven: your questions answered

What does bath re-enamelling cost?

Prices start from £350. Because every job differs, we price from photos. You will get a fixed figure before booking.

Is my repair covered?

All our work carries our one-year guarantee. Ask us what it covers when you get your quote.

Can you do more than one item on the same visit?

Yes. Doing several items on one visit usually costs less than separate visits. Include photos of each item.

Do you do work for letting agents?

Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.

Can you resurface a pink bath in white?

Yes, most people go for white. Tell us what you’d like when you ask for a quote.

Is it messy?

We protect the room with dust sheets and masking first, and tidy up before we leave.

Do I need to be at home?

Yes. We need access to the room while we work, at a time we agree with you.

What happens once I’ve sent pictures?

You’ll get a fixed quote back. There is no obligation to book.

Landlords, agents and businesses in Little Haven

Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so most of our work is done in a single visit. We’ll fit around changeovers where we can.

Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We’re CHAS, Constructionline and SafeContractor accredited.

Prices and what affects them

Prices start from £350. We don’t charge extra for travel to Little Haven. The price depends on:

  • The colour and finish to match
  • How much damage there is
  • Whether old repairs or coatings need taking off
  • Whether it’s a chip, crack, burn or wear

We don’t add extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.

Quotes from your photos

The better the photos, the more accurate the price. Here’s what we find most useful:

  • Any earlier repairs or coatings
  • A wider photo showing the whole bath
  • The material, if you know it
  • Your postcode, so we can check dates

Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed quote.

DIY repairs versus a professional job

It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.

The process

Arrival times are agreed in advance, so you know when to expect us. Once we’re there, the work takes a full day in most cases. The room is left tidy.

  1. First we protect the bathroom and set up ventilation.
  2. The bath is cleaned, degreased and any chips or rust repaired.
  3. We key the surface and put on a bonding primer.
  4. We spray several coats of new enamel finish.
  5. The bath is left to cure and can typically be used the next day.

Getting ready for the visit

  • Tell us about any previous repairs or coatings
  • Let the surface dry out before the visit
  • Have somewhere for us to park nearby if possible

Getting a price

No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.

Get a free quote

Related advice

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.