Redcar and Cleveland · England
Bath Re-enamelling in Warrenby
Bath re-enamelling for Warrenby, without a refit. Get a fixed price from your pictures, then we come to you.
- Resurfacing from £350
- A bath in a colour that no longer suits
- A roll-top that is seen better days
About our bath re-enamelling in Warrenby
When a bath is structurally fine but worn out on the surface, re-enamelling is usually the most cost-effective option. There’s no removal, plumbing or tiling involved. Our repair technicians work on basins & shower trays, pressed steel baths and acrylic baths, and common reasons people get in touch are a dull, rough surface that won’t come clean and several chips and rust patches.
Peace of mind is built in: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote.
- Area
- Warrenby (TS10)
- Region
- Redcar and Cleveland
- Guarantee
- A year, on every repair
- Quote
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Landlord and trade work in Warrenby
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
What your bath is made of matters
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Steel frequently rusts by the plughole, so we pay close attention there.
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. The bath needs to be firm and well supported for the finish to last.
Our work in Warrenby
Warrenby is about 2 miles north-west of Redcar, in Redcar and Cleveland. Wherever you are in the TS10 postcode area, a technician comes to you. We work in 48 places in Redcar and Cleveland. You can also see our page for Newcastle upon Tyne, about 34 miles away.
Every address in TS10 is covered. Neighbouring places we cover include Coatham (1 mile east), Dormanstown (1 mile south), Redcar (2 miles south-east), Kirkleatham (2 miles south) and Yearby (3 miles south-east). Larger places within reach include Guisborough (6 miles south), Eston (4 miles south-west), Marske-by-the-Sea (4 miles south-east), Grangetown (4 miles south-west), Skelton-in-Cleveland (6 miles south-east) and Skelton (6 miles south-east).
Near you in Warrenby
Typical jobs here are in homes near Sacred Heart Catholic Secondary, The Lobster Inn and Coatham Church of England Primary School and the streets around them. Warrenby’s nearest station is Redcar Central station, about 1.2 miles east. A little further out are Zetland Lifeboat Museum and Redcar Heritage Centre (1.6 miles east) and Stead Primary Care Hospital (0.8 miles east). The countryside around Warrenby includes Coatham Marsh and Seaton Snook.
Warrenby questions
Do you work in Warrenby?
Yes, we do. We send a technician to Warrenby for every job, and the price is the same as everywhere else.
Can I add another job to the visit?
Yes. Doing several items on one visit generally costs less than separate visits. Include pictures of each item.
Can tenants book a repair?
Yes, though it’s best to check with your landlord first. Landlords are frequently glad to have it sorted before the end of a tenancy.
What areas do you cover?
Everywhere in the UK, Warrenby included. There is no extra charge for travel.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Can you fix a peeling bath coating?
Typically, yes. We strip the failing coating and resurface it properly. Mention it when you send pictures.
Can landlords book you?
Yes, frequently. We can quote for several properties together and work between tenancies.
How long will the bath be out of use?
Typically one day, with the bath ready the day after. A badly pitted bath can need a second day.
Honest limits
Honesty matters more than a booking, so here’s what a repair can’t fix:
- A bath split right through the body
- An acrylic bath that flexes badly underfoot
- Steel that has corroded right through
If in doubt, send pictures and we’ll say what we think.
Materials we repair
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
What we do, step by step
Here’s how a visit typically runs: we arrive on time, protect everything around the work area, carry out the work and tidy away. Plan for the best part of a day. Before leaving, we tell you how long to leave it and what to avoid for the first few days.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Tell us if there are stairs or a lift
- Open a window if you can
- Let the surface dry out before the visit
Getting a price
Getting a price is easy: take a close-up of the damage and a photo from further back, send them to us with your postcode, and you’ll get a fixed price back. Quotes are free and you’re under no obligation.
Advice
Aftercare tips
Most damage we see is avoidable. A few tips:
- Rinse off hair dye, oils and bath bombs immediately
- Fix dripping taps quickly
- Do not leave bottles, razors or sponges standing on the surface
- Keep suction mats out of the bath
Stick to mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Resurfacing sooner means less repair work first.
DIY repairs versus a professional job
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.
Nearby places to Warrenby
More services for Warrenby
Repair or replace: which is better?
Replacing a bath normally involves a plumber, a fitter and a tiler. Re-enamelling takes one technician and typically one day, with the bath ready the following day. Our bath re-enamelling starts from £350. A repair generally costs much less than people expect, particularly next to the cost of replacement. Send pictures and we will give you the exact figure.
Why us?
- Every repair guaranteed for a year
- Usually one visit, start to finish
- We will tell you if it’s not worth repairing
- We leave the room as we found it
Take a look at our full price list and guide to resurfacing and replacement costs.
When to call us in Warrenby
Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. After years of use, the surface becomes porous and stains easily.
If you can see any of these, send us a photo:
- A period or roll-top bath worth keeping
- Chips and rust in more than one place
- An outdated colour you’d like to change
- Staining under the taps and around the waste
What your quote should include
- What the guarantee covers, and for how long
- Whether the price is fixed and includes VAT
- What aftercare is recommended
- Whether a trained technician does the job
About our accreditations · Every repair comes with a one-year guarantee.
