East Riding of Yorkshire · England
Bath Re-enamelling for Weel homes
Full bath re-enamelling and resurfacing at your home in Weel, with a one-year guarantee on every repair.
- Resurfacing from £350
- A peeling or bubbling previous coating
- A coloured bath you want in white
Bath re-enamelling in Weel without replacing anything
Resurfacing renews the entire surface of the bath without taking anything out. It suits baths that are dull, stained, rough or chipped all over. We regularly repair basins & shower trays, acrylic baths and pressed steel baths, and the jobs we see most are brown or grey marks that don’t clean off and a roll-top that’s seen better days.
All our work comes with our one-year guarantee, wherever you are in East Riding of Yorkshire.
- Where
- Weel (HU17)
- Region
- East Riding of Yorkshire
- Warranty
- 12 months on all our work
- Price
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Common problems we fix in Weel
A dull surface stains and holds dirt, and scrubbing it wears it down further. That’s the point where re-enamelling makes sense.
People typically call us after spotting one of these:
- Lots of chips and rust spots
- Worn patches where water runs and sits
- Enamel that’s lost its shine and feels rough
- A bath in a colour that no longer suits
What your quote should include
- Whether they match the colour on site
- What protection goes down before work starts
- Whether the price is fixed and includes VAT
- What preparation is included
Weel and nearby
Weel is about 2 miles east of Beverley, in East Riding of Yorkshire. Wherever you are in the HU17 postcode area, we come to you. Weel is one of 299 places in East Riding of Yorkshire where we work. Our nearest city page is Leeds, about 48 miles away.
Every address in HU17 is covered, from the main roads to the quietest streets. We also travel to Woodmansey (1 mile south-west), Tickton (2 miles north), Thearne (2 miles south), Wawne (2 miles south-east) and Routh (3 miles north-east). Further out, we also cover Driffield (12 miles north), Hessle (8 miles south), Cottingham (4 miles south), Hornsea (10 miles north-east), Market Weighton (12 miles west) and Brough (11 miles south-west).
Near you in Weel
Locally, our jobs take us to homes close to Beverley High School. The closest station to Weel is Beverley station, roughly 1.6 miles west. Well-known places in the area include Baynard Castle (4.3 miles south) and The Beverley Treasure House (1.9 miles west).
Also in Weel
Weel questions
What do you need from me?
Send pictures through the quote form or call 0345 017 0787.
When can you do it?
That depends on our diary for your area. Send photos with your postcode and we will reply with the earliest dates.
Do you need to take the bath out?
Not at all. Everything is done in your bathroom, with the room protected and ventilated.
What happens if you find more damage?
We’ll show you and explain before doing anything extra. You will not be charged for anything you haven’t agreed.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Can you make a coloured bath white?
Yes, white is the usual choice. Mention the colour you want when you send photos.
Can you fix a peeling bath coating?
Yes. Removing the old finish takes extra time, which we include in the price.
How long is the bath unusable?
Typically a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
Should I try a DIY kit first?
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is normally cheaper.
Keeping it looking good
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Avoid suction-cup mats
- Wipe the bath dry after use in hard water areas
- Clean with a soft cloth and mild detergent
- Respect the curing time we give you
Treat the new finish gently at first: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.
Do not try to scrub a worn bath back to shine. It removes more of the surface.
How we price bath re-enamelling
Prices start from £350. You will not pay by the hour. The price is based on:
- Access to the area
- The material and finish
- Any earlier repairs that need removing first
- What kind of damage it is
Compared with replacing, a repair is generally a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
Send pictures for a quote
A couple of clear pictures is all it takes. Try to include:
- One picture of the entire bath
- Any earlier repairs or coatings
- A coin or ruler next to the damage for scale
- A close-up of the damage, in focus
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can price the job.
When we’d advise against a repair
We’ll always be straight with you, so here’s what a repair will not do:
- Anything hidden under an old coating, until we remove it
- A bath split right through the body
- A poorly supported acrylic bath, until it’s firmed up
Not sure? Send photos and we’ll give you a straight answer before you book.
Materials we work on in Weel
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
- Cast iron baths
For landlords and businesses
We regularly work with letting and managing agents. Just send pictures, the address and how to get access and we’ll handle the rest.
Letting agents frequently send us photos straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
How the visit works
Visits start with a quick look at the job together, so you know exactly what we are doing. Then the area is sheeted and masked and we start. It normally takes the best part of a day, and we will tell you if anything changes.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
How to prepare
- Mention any earlier repairs or resurfacing
- Let us know about parking or access
- Clear the area around the damage
How to get a price
Email us a picture of the damage and one of the whole item, with your HU17 postcode, and we’ll come back with a fixed quote.
Advice
Repair or replace in Weel?
A refit takes several trades and several days. Resurfacing is one technician, normally in a day, with the bath ready the following day. Resurfacing from £350, with every job priced individually. Rather than charging by the hour, we price the entire job up front. Damage, material and access decide it.
Why Weel clients choose us
- Same prices wherever you are
- We will tell you if it’s not worth repairing
- We leave the room as we found it
- CHAS and Constructionline accredited
Read our pricing and bath cost comparison.
About our accreditations · Every repair comes with a one-year guarantee.
