Warwickshire · England
Bath re-enamelling & resurfacing in Walton, Warwickshire
Damaged bath in Walton? We repair it in place, mix the colour on the day and guarantee the work for a year.
- Resurfacing from £350
- An outdated colour you’d like to change
- A bath that stays dull however much you clean it
When a repair isn’t the answer
A repair is not always the answer, and we’ll tell you before we start. Repairs will not solve:
- Anything hidden under an old coating, until we remove it
- A poorly supported acrylic bath, until it’s firmed up
- A bath split right through the body
Not sure? Send photos and we will give you a straight answer.
Materials we work on in Walton
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
- Cast iron baths
Bath re-enamelling in Walton, done in place
After cleaning, repairing and priming, we spray on the new finish. The preparation is what makes it last, so we do not cut corners on it. We regularly repair Victorian roll-tops, basins & shower trays and pressed steel baths, and people most frequently call us about a peeling or bubbling previous coating and a bath that stays dull however much you clean it.
Peace of mind is built in: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote.
- Location
- Walton (CV35)
- Region
- Warwickshire
- Warranty
- One year on every repair
- Price
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Prices and what affects them
Prices start from £350. You’ll know the full cost before you book. We look at:
- The material and finish
- Where the damage is and how we get to it
- Whether old repairs or coatings need taking off
- Whether it’s a chip, crack, burn or wear
The price reflects the work involved, not where you live. The full price is agreed before you book.
Getting a price from photos
A couple of clear pictures is all it takes. It helps if you send:
- One sharp close-up of the damage
- Good light, ideally daylight, without flash glare
- A coin or ruler next to the damage for scale
- Any earlier repairs or coatings
Email us a picture of the damage and one of the whole item, and tell us you’re in Walton, and we will reply with a fixed price.
About Walton
Walton is about 6 miles east of Stratford-upon-Avon, in Warwickshire. We agree a date that works for you, and we will give you an arrival time in advance, so there’s no waiting around. We work in all 324 towns and villages in Warwickshire. Our nearest city page is Birmingham, about 24 miles away.
Here we cover the CV35 postcode area. Other places close to Walton include Wellesbourne (1 mile north-west), Compton Verney (2 miles east), Combrook (2 miles south-east), Butlers Marston (3 miles south-east) and Pillerton Hersey (3 miles south). Within a short drive, we also cover Warwick (7 miles north), Royal Leamington Spa (8 miles north), Stratford-upon-Avon (6 miles west), Leamington Spa (8 miles north), Kenilworth (12 miles north) and Southam (10 miles north-east).
What’s near Walton
We visit homes around Church of St James, among other places. Other landmarks nearby include King John's Castle (3.2 miles south-east) and Chedham's Yard (1.2 miles north).
How to care for the repair
Simple care helps the repair last. Our advice:
- Wash away dyes and oils after use
- Dry the bath after use to stop limescale
- Store bottles off the bath
- Respect the curing time we give you
Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
Common problems we fix in Walton
In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.
Signs it’s time to call us include:
- A coloured bath you want in white
- Stains that won’t shift
- Several chips and rust patches
- A roll-top that’s seen better days
Comparing quotes
- Whether the price is fixed and includes VAT
- What happens if the damage is worse than the photos show
- How to look after the finish
- What the guarantee covers, and for how long
What your bath is made of matters
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
What happens on the day
Once we’re through the door, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the job takes most of the day, and we finish by cleaning up and talking you through the result.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure.
How to prepare
- Let us know about parking or access
- Plan for the room to be out of bounds to pets and children
- Make sure the room can be ventilated
Getting a price
Getting a price is easy: snap the damage close up and then the whole item, send them to us with your postcode, and you will get a fixed price back. Quotes are free and you are under no obligation.
Read more
Common questions in Walton
Is there a call-out fee?
Travel is included in the price, and we charge the same wherever you are.
Do you come to Walton?
Yes, we do. Technicians travel to Walton from across the region, and the price is the same as everywhere else.
What if the damage is worse than the pictures show?
If we find something the photos didn’t show, we explain it first. You decide whether to go ahead.
Can I get a quote without a visit?
Nearly always. If photos don’t show enough, we will ask for another angle.
What do you need from me?
A close-up, a wider photo and your postcode. Then we’ll agree a date.
Is the work guaranteed?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Can you make a coloured bath white?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
Which areas do you work in?
We cover the entire UK, including Walton and the rest of Warwickshire. Send your postcode with your photos and we will confirm dates.
DIY repairs versus a professional job
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is normally cheaper.
Towns and villages near Walton
What else we do in Walton
Landlords, agents and businesses in Walton
Housing associations and facilities teams use us for planned and reactive repairs in Warwickshire and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
We’re used to working with agents and managing companies. Send the address, photos and access details and we’ll arrange it.
About our accreditations · Every repair comes with a one-year guarantee.
