Cheshire West and Chester · England
Bath re-enamelling & resurfacing in Westminster, Cheshire West and Chester
Bath re-enamelling for Westminster, without a refit. Get a fixed price from your photos, then we come to you.
- Resurfacing from £350
- Thin, worn enamel in places
- Staining under the taps and around the waste
How we handle bath re-enamelling in Westminster
After re-enamelling, the bath has a smooth, glossy, new-looking surface, but without the cost and upheaval of a refit. It’s ideal if you like your bathroom but not the state of the bath. If you’re dealing with a dull, rough surface that won’t come clean and lots of chips and rust spots, we can usually put it right.
We stand behind the work with a one-year guarantee.
- Where
- Westminster (CH65)
- Region
- Cheshire West and Chester
- Guarantee
- 12 months on all our work
- Quotes
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Repair or replace: which is better?
Replacing a bath generally involves a plumber, a fitter and a tiler. Re-enamelling takes one technician and usually one day, with the bath ready the next day. Our bath re-enamelling starts from £350. Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access.
Why book with us
- Colour mixed on the day to match
- Every repair guaranteed for a year
- We’ll tell you if it’s not worth repairing
- Fixed prices from your pictures
See our pricing or bath cost comparison.
Places near Westminster
Other services in Westminster
What affects the price in Westminster
Prices start from £350. Every quote is fixed and free. What we look at:
- Any earlier repairs that need removing first
- Whether it’s a chip, crack, burn or wear
- Unusual colours or finishes
- The material
The price depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. We give a fixed price from your pictures, so you know the cost before you book.
How to get a fixed quote
Most quotes are done from photos alone. To help us price it:
- Any earlier repairs or coatings
- Natural light rather than flash
- What it’s made of, if you know
- A coin or ruler next to the damage for scale
We price from pictures so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.
Westminster questions
Can you redo someone else’s repair?
Most of the time. Tell us what was done before and we’ll plan for it.
What if the damage is worse than the photos show?
If we find something the photos didn’t show, we explain it first. The price only changes if you agree.
Can I get a quote without a visit?
In nearly every case. If photos don’t show enough, we will ask for another angle.
How long will the bath be out of use?
Most baths are done in a day and can be used the day after. We’ll confirm timings when we quote.
Can you make a coloured bath white?
Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.
What happens after I send photos?
You will get a fixed quote back, generally with dates to choose from. You’re under no obligation.
Is there any odour?
A little, depending on the job. Open windows and an extractor fan help, and it soon fades.
Do you cover the entire of Cheshire West and Chester?
Everywhere in the UK, Westminster included. There’s no extra charge for travel.
Aftercare tips
After the repair has cured, a few habits help it last:
- Dry the bath after use to stop limescale
- Store bottles off the bath
- Keep suction mats out of the bath
- Don’t use the bath until it has fully cured
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
Worn enamel only gets rougher with time, and any rust spreads underneath. Resurfacing sooner means less repair work first.
What we’re called out for in Westminster
Older baths often have several problems at once: dull areas, chips, rust and staining. Re-enamelling deals with all of them in one go.
Clients typically contact us about:
- A coating lifting around the plughole
- Staining under the taps and around the waste
- A period or roll-top bath worth keeping
- A bath in a colour that no longer suits
Questions to ask before you book
- What protection goes down before work starts
- How to look after the finish
- How the colour is matched
- Is the price fixed, and does it include VAT?
Our work in Westminster
Westminster is about 1 mile north-east of Ellesmere Port, in Cheshire West and Chester. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. Westminster is one of 224 towns and villages in Cheshire West and Chester where we work. We work right across the region, from Westminster to Liverpool (8 miles away).
Our visits in CH65 are booked in the same way as anywhere else. From Bell Lane, Holly Road and Cedab Road or anywhere nearby, a technician can come to you. Westminster sits on or near the M53, so getting to you is simple. We also cover the places around Westminster: Little Stanney (2 miles south), Stoak (3 miles south), Ince (3 miles east), Thornton-le-Moors (3 miles south-east) and Chorlton-by-Backford (3 miles south). Further out, we also cover Chester (6 miles south), Northwich (15 miles east), Neston (7 miles west), Boughton (7 miles south), Frodsham (7 miles east) and Hoole (6 miles south).
Landmarks near Westminster
We visit homes around Whitby Park, Christ Church and Westminster Community Primary School and the streets around them. Nearby too are Ellesmere Port Church of England College (1 mile south-west) and Station Hotel (within half a mile south-west). Westminster has its own railway station: Ellesmere Port station. Further afield, we also cover the area around Cheshire Oaks Designer Outlet (1.5 miles south) and Municipal Borough of Ellesmere Port (0.5 miles south-west). Green spaces nearby include Gowy Meadows Nature Reserve.
Can I fix it myself?
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
Materials and what they mean for the repair
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so a new finish makes them look new again.
When we would advise against a repair
We will not take on work that will not last, so these are the limits:
- A cast iron or steel bath that is cracked right through
- Anything hidden under an old coating, until we remove it
- A poorly supported acrylic bath, until it’s firmed up
If in doubt, send photos and we will say what we think.
What we work on
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
The process
From the moment we arrive, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the job takes most of the day, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can usually be used the following day.
Getting ready for the visit
- Avoid using the area for a few hours before we arrive
- Plan for the room to be out of bounds to pets and children
- Tell us about any previous repairs or coatings
Get a quote
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
