Shropshire · England

Bath Re-enamelling in Wetmore

Full bath re-enamelling and resurfacing for homes and businesses in Wetmore and across Shropshire. Send photos for a free, fixed quote.

  • Resurfacing from £350
  • Thin, worn enamel in places
  • A period or roll-top bath worth keeping
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath re-enamelling in Wetmore

Bath re-enamelling at your home in Wetmore

Resurfacing renews the whole surface of the bath without a refit. It suits baths that are dull, stained, rough or chipped all over. Whether it’s brown or grey marks that don’t clean off and a coloured bath you want in white, we can normally put it right, whatever the material.

All our work is covered by a one-year guarantee, wherever you are in Shropshire.

Surface Doctor technician refinishing the outside of a roll-top bath
Where
Wetmore (SY8)
Region
Shropshire
Cover
12 months on all our work
Quote
From £350. Fixed and free, based on pictures
Telephone
0345 017 0787
Updated
23 October 2026

Keeping it looking good

So the finish stays in good condition for years:

  • Repair dripping taps early
  • Respect the curing time we give you
  • Dry the bath after use to stop limescale
  • Avoid suction-cup mats

Dry the bath after use if possible, and rinse away any product left on the surface.

If a previous coating is starting to peel, don’t pick at it. Water gets under it and the damage spreads, so have it stripped and resurfaced.

How we price bath re-enamelling

Prices start from £350. There is no area surcharge for Wetmore. What changes the price is:

  • Access to the area
  • Whether we combine several jobs
  • The material
  • The type of damage

It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.

How to get a fixed price

When you take your photos, a few simple things make all the difference:

  • Something in shot to show the size
  • Where you are, by postcode
  • What it’s made of, if you know
  • One sharp close-up of the damage

Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, include your postcode and send them over. What comes back is a fixed price, not a guess.

Repair or replace: which is better?

Replacing a bath can take several days across several trades. Re-enamelling is one technician, normally one day, and the bath is usable the day after. Our bath re-enamelling starts from £350. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.

What you get with us

  • One visit for most repairs
  • Straight answers about what a repair can do
  • Same prices wherever you are
  • Colour mixed on the day to match

Take a look at our pricing and bath cost comparison.

How the visit works

On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job typically takes most of the day. We clean up when we are done and let you know when you can use it again.

  1. We check the bath and agree the finish with you.
  2. Everything around the bath is masked and covered.
  3. We degrease the bath, fix any damage and key the surface.
  4. We apply the primer and then the finish coats.
  5. We remove the masking, tidy up and give you the curing time.

Preparing for the visit

  • Tell us if there are stairs or a lift
  • Tell us about parking, stairs or access
  • Make sure the room can be ventilated

Getting a price

Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can price the job the same day in most cases.

Get a fixed price

Advice

About Wetmore

Wetmore is about 19 miles south-west of Bridgnorth, in Shropshire. Jobs in Wetmore are booked in like any other job: a fixed quote from pictures, then a visit to do the work. We work in all 433 towns and villages across Shropshire. Our jobs stretch from Wetmore to Birmingham (about 39 miles away).

Postcode districts we cover here: SY8. Neighbouring places we cover include Whittytree (1 mile north-west), Onibury (2 miles north), Bromfield (2 miles east), Todding (3 miles west) and Pipe Aston (3 miles south). Further out, we also cover Ludlow (4 miles east), Church Stretton (11 miles north), Craven Arms (4 miles north), Cleobury Mortimer (14 miles east), Bishop's Castle (11 miles north-west) and Clun (10 miles west).

What’s near Wetmore

The nearest railway station is Ludlow station, roughly 4 miles east of the centre. Nearby you will also find Ludlow Community Hospital (4 miles east) and Ludlow Museum (3.9 miles east). Green spaces nearby include Shelderton Hill.

Map of Wetmore © OpenStreetMap contributors

What a repair can’t fix

We’ll always be straight with you, so here’s what a repair can’t fix:

  • A cast iron or steel bath that is cracked right through
  • A poorly supported acrylic bath, until it’s firmed up
  • Leaking taps or wastes (a plumber’s job)

If in doubt, send photos and we’ll say what we think.

What we work on

  • Acrylic baths
  • Cast iron baths
  • Pressed steel baths
  • Victorian roll-tops
  • Basins & shower trays

Questions from Wetmore

Which areas do you work in?

The whole UK, including all of Shropshire. Send your postcode with your pictures and we’ll offer you dates.

Does re-enamelling smell?

Some odour is normal while we spray, which is why we ventilate the bathroom. It fades as the coating cures.

Can you price it without visiting?

Yes, almost always. Clear photos let us give you a fixed price without visiting.

Can you resurface a pink bath in white?

Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.

What information do you need?

Just pictures, your postcode and a contact number. On the day, we only need access to the room.

Is there a guarantee?

All our work carries a one-year guarantee. We’ll explain what it covers when we quote.

How long does re-enamelling last?

Look after it and it lasts. Gentle cleaning, no suction mats.

Do you resurface freestanding baths?

Yes. We can do the inside and outside if you’d like.

DIY repairs versus a professional job

If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.

If you do try a kit, read the instructions carefully, and give it the full curing time. If it fails, we can still put it right.

Landlord and trade work in Wetmore

We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.

We work for landlords, letting agents and housing providers in Wetmore as well as homeowners. A repair between tenants keeps the property empty for less time, and it normally costs far less than a refit.

Signs you need bath re-enamelling in Wetmore

Often the bath has just had decades of use, and only the surface is worn. Underneath, a cast iron or steel bath is normally as strong as ever.

Keep an eye out for any of the following:

  • Chips and rust in more than one place
  • A bath in a colour that no longer suits
  • A dull, rough surface that will not come clean
  • Stains that won’t shift

What to look for in a quote

  • What prep work is covered
  • How soon you can use it again
  • Is the price fixed, and does it include VAT?
  • What aftercare is recommended

10 questions to ask before booking

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.