Staffordshire · England
Bath Re-enamelling in Whitley Heath
We travel to Whitley Heath for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.
- Resurfacing from £350
- Wear marks under the taps
- Brown or grey marks that don’t clean off
Your questions about bath re-enamelling in Whitley Heath
Do you resurface freestanding baths?
Yes, frequently. We resurface the inside, and the outside can be refinished too.
How long will the bath be out of use?
Normally one day, with the bath ready the following day. Deeply pitted baths may need a second day.
Is it OK to have pets in the house?
Just keep them out of the work area. We will tell you when the room can be used again.
Can landlords book you?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
How do I get a price for bath re-enamelling in Whitley Heath?
Prices start from £350. The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.
What do you need from me?
Just pictures, your postcode and a contact number. On the day, access to the room.
Can you change the colour of my bath?
Yes, white is the usual choice. Mention the colour you want when you send pictures.
Is there a call-out fee?
There is no separate call-out charge. Your fixed price includes everything.
About our bath re-enamelling in Whitley Heath
Cast iron and steel baths are ideal for re-enamelling, and acrylic baths can be resurfaced too. The result is a smooth, even, glossy finish. Whether it’s worn patches where water runs and sits and brown or grey marks that don’t clean off, we can normally put it right.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Where
- Whitley Heath (ST21)
- County
- Staffordshire
- Warranty
- 12 months on all our work
- Quotes
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Repair or replace in Whitley Heath?
For a sound bath, resurfacing costs far less than replacement, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Our bath re-enamelling starts from £350. The price depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. We give a fixed quote from your pictures, so you know the cost before booking.
Why us?
- Most jobs done in one visit
- Nothing taken out or refitted
- CHAS, Constructionline and SafeContractor accredited
- No extra charge for your area
Take a look at our pricing or resurfacing vs replacement cost guide.
Repairs by material
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Prices and what affects them
Prices start from £350. A fixed quote means you know the cost before you book. We take into account:
- The material and finish
- Whether we combine several jobs
- Where the damage is and how we get to it
- Whether old repairs or coatings need taking off
The price reflects the work involved, not your postcode. The full price is agreed before you book, with nothing added on the day.
Send pictures for a quote
The better the photos, the more accurate the price. Here’s what helps:
- Your postcode, so we can check dates
- A coin beside the damage so we can judge size
- Details of any past repairs
- A clear, close picture of the problem area
A quote takes minutes to ask for: photograph the damage, then the entire bath, add your postcode and send them to us. What comes back is a fixed price, not a guess.
What we’re called out for in Whitley Heath
Many baths we resurface have simply been well used. Underneath, a cast iron or steel bath is typically as strong as ever.
Typical reasons for a call-out include:
- A period or roll-top bath worth keeping
- A bath that stays dull however much you clean it
- Stains that will not shift
- Wear marks under the taps
Comparing quotes
- The length of the guarantee and what it covers
- How your room will be protected
- Whether the price covers travel
- Who turns up on the day
Towns and villages near Whitley Heath
Also in Whitley Heath
What we cannot put right
Honesty matters more than a booking, so here’s what a repair cannot fix:
- A bath split right through the body
- Steel that has corroded right through
- Damage hidden under a previous coating, until it’s stripped back
If in doubt, send pictures and we will say what we think before you book.
Surfaces we repair
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
How it works
Your technician turns up at the time we agreed with you and checks the damage against your photos first. Dust sheets and masking tape go down before we open a single tin. The work itself takes most of the day, and the room is left clean and tidy.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the following day.
How to prepare
- Keep pets and children out of the room while we work
- Move bottles, mats and clutter away from the area
- Let the surface dry out before the visit
Get a quote
Send us photos of the damage and a wider shot of the entire item, with your ST21 postcode, and we’ll reply with a fixed price.
Advice
Aftercare tips
After the repair has cured, a few habits help it last:
- Do not leave a chip unrepaired
- Dry the bath after use to stop limescale
- Use washing-up liquid and a soft cloth
- Fix dripping taps quickly
Stick to mild, non-abrasive cleaners, do not use suction bath mats, and keep bottles and razors off the surface.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further and makes resurfacing more work.
Should I try a DIY kit first?
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
About Whitley Heath
Whitley Heath is about 6 miles north-east of Newport, in Staffordshire. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. We cover all 512 towns and villages across Staffordshire. Our jobs stretch from Whitley Heath to Birmingham (30 miles away).
Postcode districts we cover here: ST21. We also travel to Wootton (1 mile north-east), Knightley (1 mile south-west), Garmelow (1 mile north-west), Copmere End (1 mile north-west) and Lower Knightley (1 mile south). Further out, we also cover Stafford (7 miles east), Newcastle-under-Lyme (13 miles north), Cannock (14 miles south-east), Longton (12 miles north-east), Rugeley (15 miles east) and Stone (7 miles north-east).
Around Whitley Heath
Our customers here include homes close to Woodseaves CE Primary Academy and Christ Church and the streets around them. Well-known places in the area include Eccleshall Castle (2.1 miles north). The countryside around Whitley Heath includes Loynton Moss and Cop Mere.
About our accreditations · Every repair comes with a one-year guarantee.
