Greater London · England
Bath re-enamelling & resurfacing in Willesden, Greater London
Fixed-price bath re-enamelling in Willesden and the surrounding area, done in a single visit in most cases.
- Resurfacing from £350
- Brown or grey marks that don’t clean off
- Wear marks under the taps
How to look after the repair
A little care keeps the finish looking good. Our advice:
- Fix dripping taps quickly
- Clean with a soft cloth and mild detergent
- Wash away dyes and oils after use
- Have chips seen to early
Stick to mild, non-abrasive cleaners, avoid suction bath mats, and don’t leave bottles or razors standing on the surface.
Rust spots on a worn bath get worse with time and make the job bigger. Resurfacing before they spread keeps it simpler.
About our bath re-enamelling in Willesden
Re-enamelling works especially well on cast iron and steel, and acrylic baths can be resurfaced too. The result is a smooth, even, glossy finish. We regularly repair Victorian roll-tops, pressed steel baths and acrylic baths, and the jobs we see most are thin, worn enamel in places and an original cast iron bath that needs restoring.
We guarantee the work for a year. If something isn’t right in that time, we come back and put it right.
- Where
- Willesden (NW10, NW2)
- Region
- Greater London
- Cover
- A year, on every repair
- Price
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
What your bath is made of matters
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Repairing versus replacing in Willesden
Replacing a bath generally involves a plumber, a fitter and a tiler. Resurfacing is one technician, normally in a day, with the bath ready the day after. Prices start from £350. The price reflects the work involved, not your postcode. You’ll see the full price before booking, with no extras added later.
Why Willesden clients choose us
- Honest advice, even when it means no job
- CHAS and Constructionline accredited
- Colour mixed on the day to match
- Every repair guaranteed for a year
See our prices page or bath cost comparison.
What a repair cannot fix
We will not take on work that won’t last, so here’s what a repair can’t put right:
- An acrylic bath that flexes badly underfoot
- Damage hidden under a previous coating, until it’s stripped back
- Leaks from fittings rather than the bath
If in doubt, send photos and we will say what we think before booking.
What we work on
- Pressed steel baths
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
Common questions in Willesden
Does the bath have to be removed?
No. We resurface it in place, so nothing else is disturbed.
Do you cover the whole of Greater London?
All of Greater London, and the rest of the UK. Travel is included in the price.
Is repairing better than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.
Will the new finish last?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.
Can you price it without visiting?
In nearly every case. If pictures don’t show enough, we will ask for another angle.
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as homeowners in Willesden.
Does re-enamelling smell?
Some odour is normal while we spray, which is why we ventilate the bathroom. It fades as the coating cures.
How quickly can you book me in?
It depends on the time of year and where you are. Send photos with your postcode and we’ll reply with the earliest dates.
Towns and villages near Willesden
Other services in Willesden
Landlords, agents and businesses in Willesden
Builders use us to fix snagging damage before handover. We can visit several plots in one trip to keep costs down.
If you manage property in Willesden, we can repair and quote for several addresses together. Just send pictures for each address and we will price them together.
Willesden and the surrounding area
Willesden is about 2 miles west of Hampstead, in Greater London. We agree a date that works for you, and you’ll know when to expect us, so there is no waiting around. Willesden is one of 764 towns and villages in Greater London we cover. Our jobs stretch from Willesden to London (7 miles away).
Postcode districts we cover here: NW10 and NW2. Local streets include Tudor Mews, Chaplin Road and Belton Road. Willesden sits on or near the B453, so getting to you is simple. We also cover the places around Willesden: Willesden Green (1 mile south), Neasden (1 mile north-west), Church End (1 mile west), Cricklewood (1 mile north-east) and Harlesden (1 mile south-west). Within a short drive, we also cover London (7 miles south-east), City of Westminster (4 miles south-east), Marylebone (4 miles south-east), Kensington (4 miles south-east), St Pancras (5 miles east) and Shoreditch (7 miles east).
Around Willesden
In Willesden, that means homes near Roundwood Park, Capital City Academy and Brondesbury College, among other places. You’ll also find Church of St Andrew (under half a mile south-east), Royal Oak Inn (0.9 miles south-west) and St Andrew and St Francis CofE Primary School (under half a mile north-west). The closest station to Willesden is Kensal Rise station, roughly 1.1 miles south-east. A little further out are Middlesex (1.6 miles west) and St Andrew's Hospital (0.9 miles north). For a walk, there’s The Long Water and Primrose Hill.
Signs you need bath re-enamelling in Willesden
Often the bath has just had decades of use, with nothing wrong except the surface. Underneath, a cast iron or steel bath is normally as strong as ever.
It’s worth getting a quote if you see:
- An original cast iron bath that needs restoring
- An old resurfacing that is failing
- A coloured bath you want in white
- Lots of chips and rust spots
What to look for in a quote
- What prep work is covered
- How long the guarantee is and what it covers
- Whether they match the colour on site
- A fixed price, and whether VAT is included
Should I try a DIY kit first?
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
What we do, step by step
Here’s how a visit normally runs: we arrive on time, sheet and mask the area around the job, do the job and tidy away. Plan for the best part of a day. Before leaving, we tell you when it can be used and how to look after it.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Preparing for the visit
- Point us to the nearest place to park
- Open a window if you can
- Mention any parking restrictions or tricky access
Getting a price
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can price the job without visiting.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
