Greater London · England
Bath Re-enamelling for Cricklewood homes
Local bath re-enamelling for Cricklewood: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- A peeling or bubbling previous coating
- A bath in a colour that no longer suits
Do you need bath re-enamelling in Cricklewood?
Once enamel loses its gloss, it stains more easily, and scrubbing it wears it down further. That is the point where re-enamelling makes sense.
You may need us if you’ve spotted:
- An old resurfacing that’s failing
- A bath in a colour that no longer suits
- Enamel that’s lost its shine and feels rough
- Worn patches where water runs and sits
Before you book anyone
- Whether cleaning and preparation are in the price
- How the room is protected while they work
- Whether the price covers travel
- What happens if they find more damage
Bath re-enamelling in Cricklewood without replacing anything
Re-enamelling is a one-day job for most baths, and you can use the bath the next day. Nothing is disconnected or removed. Our repair technicians work on Victorian roll-tops, cast iron baths and pressed steel baths, and common reasons people contact us are a peeling or bubbling previous coating and lots of chips and rust spots.
Peace of mind is built in: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote.
- Location
- Cricklewood (NW2, NW6, NW10)
- Area hub
- Greater London
- Guarantee
- One year on every repair
- Price
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
How it works
You don’t need to empty the room. We bring everything we need with us, lay protective sheets and start once you’re happy with the plan. It generally takes a full day, and you can get on with other things while we are there.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can generally be used the next day.
Before we arrive
- Open a window if you can
- Clear toiletries, mats and anything else from around the area
- Mention if the room is upstairs or in a flat
Getting a price
Pricing is simple: snap the damage close up and then the whole item, send them to us with your postcode, and we will reply with a fixed quote. Quotes are free and no obligation.
Read more
Different materials, different repairs
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
DIY kit or professional repair?
If you do try a kit, read the instructions carefully, and give it the full curing time. If it fails, we can still put it right.
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it does not stop a professional repair. It does add a little time, so tell us about it when you send pictures.
When we would advise against a repair
It helps to know what we cannot do too:
- Problems we cannot see until an old finish comes off
- Leaking taps or wastes (a plumber’s job)
- Holes rusted through the metal
Send us pictures and we will tell you honestly before you book.
Materials we work on in Cricklewood
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
What affects the price in Cricklewood
Resurfacing from £350. There is no charge for travel to Cricklewood. The price comes down to:
- Access to the area
- The colour and finish to match
- How much damage there is
- Previous DIY repairs that have to come out
We don’t add extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Getting a price from photos
Good pictures mean an accurate price. Here’s what helps:
- One sharp close-up of the damage
- Good light, ideally daylight, without flash glare
- Your postcode, so we can check dates
- A coin beside the damage so we can judge size
There’s no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
Also near Cricklewood
What else we do in Cricklewood
Common questions in Cricklewood
Is the work guaranteed?
Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.
Are there extra charges for Cricklewood?
We do not add a call-out fee. The fixed quote covers the visit and the work.
What happens once I’ve sent photos?
We review the photos and send a fixed quote with dates.
Is it messy?
No. The work area is masked and covered, and we take our waste away with us.
How long will the bath be out of use?
Usually a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as householders across Greater London.
Does re-enamelling smell?
Yes, while we’re applying the finish. Ventilation keeps it down, and it fades as the finish cures.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Repairing versus replacing in Cricklewood
A replacement often means several trades over several days. Re-enamelling is one technician, generally one day, with the bath back in use the following day. Our bath re-enamelling starts from £350. A repair is priced on what needs doing, not where you live. The full price is agreed before you book.
Why us?
- No need to remove anything
- We leave the room as we found it
- Accredited with CHAS, Constructionline and SafeContractor
- Straight answers about what a repair can do
Take a look at our pricing and bath cost comparison.
Cricklewood and the surrounding area
Cricklewood is about 1 mile north-west of Kilburn, in Greater London. Across the NW2 area, we carry out the work at your property. We work in 764 places in Greater London, from the larger towns to small villages. Our nearest city page is London, about 7 miles away.
Postcode districts we cover here: NW2, NW6 and NW10. Whether you live on Ivy Road, Walm Lane and Dean Road or a nearby road, we can come to you. You’ll find Cricklewood on the A407, which makes it straightforward to reach. We also cover the places around Cricklewood: Brondesbury (1 mile south-east), Willesden (1 mile south-west), Dollis Hill (1 mile north-west), Willesden Green (1 mile south-west) and Neasden (1 mile west). Within a short drive, we also cover London (7 miles south-east), City of Westminster (4 miles south-east), Marylebone (4 miles south-east), Kensington (4 miles south), St Pancras (5 miles south-east) and Shoreditch (6 miles east).
Around Cricklewood
Typical jobs here are in homes near Gladstone Park, The Crown Public House and Anson Primary School and the streets around them. Also close by are Brondesbury College (0.9 miles south), St Gabriel's Church (less than half a mile south) and Hampstead School (0.5 miles east). There’s a railway station in Cricklewood itself: Cricklewood station. A little further out are Brent Cross Shopping Centre (1.5 miles north) and Brent Museum and Archives (0.7 miles south-west). The countryside around Cricklewood includes Parliament Hill and Westbere Copse.
- Other local spots include Frognal and Fitzjohns (1.4 miles east)
Looking after it afterwards
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- A dripping tap should be fixed promptly
- Do not let dyes or oils sit on the finish
- Avoid suction-cup mats
- Clean with a soft cloth and mild detergent
Rinse the bath and wipe it over after use, particularly where water is hard, so limescale cannot build up.
On a worn bath, rust spots keep spreading. Resurfacing before they spread keeps it simpler.
About our accreditations · Every repair comes with a one-year guarantee.
