Brighton and Hove · England
Bath Re-enamelling for Withdean homes
Bath re-enamelling across Withdean and nearby, generally in one visit.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- A peeling or bubbling previous coating

Different materials, different repairs
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Steel frequently rusts by the plughole, so we pay close attention there.
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Bath re-enamelling at your home in Withdean
We re-enamel a lot of period and roll-top baths, which would be difficult and expensive to replace. Resurfacing them in place keeps the original bath. Whether it’s thin, worn enamel in places and a period or roll-top bath worth keeping, we can typically put it right.
You get a one-year guarantee, the same in Withdean as everywhere else we work.

- Location
- Withdean (BN1, BN3)
- Region
- Brighton and Hove
- Cover
- A year, on every repair
- Quotes
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
What we do, step by step
On the day itself, there is little for you to do. Let us in and show us the room, and we will get on with it. The job generally runs to a full day.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the day after.
Preparing for the visit
- Keep children and pets away from the room on the day
- Point us to the nearest place to park
- Let us know which floor the room is on
Get a quote
The quickest way to a price is to send two or three pictures using our quote form or ring us. We will say right away if a repair is the right fix.
Related advice
Aftercare tips
Good habits make a big difference to how long a repair lasts:
- A quick wipe after use keeps limescale away
- Store bottles off the bath
- Do not use the bath until it has fully cured
- Wash away dyes and oils after use
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Repair dripping taps promptly.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
Nearby places to Withdean
More services for Withdean
Common problems we fix in Withdean
Enamel doesn’t fail overnight. Years of cleaning, hard water and hot baths wear the gloss away, starting where water runs and sits.
Common reasons people in Withdean contact us are:
- An outdated colour you’d like to change
- Wear marks under the taps
- A peeling or bubbling previous coating
- Stains that will not shift
What your quote should include
- Whether there are any call-out or travel charges
- When it can be used again
- Aftercare advice
- Who will actually do the work
DIY kit or professional repair?
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.
Landlord and trade work in Withdean
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We are CHAS, Constructionline and SafeContractor accredited.
We regularly work with letting and managing agents. Just send pictures, the address and how to get access and we will arrange it.
Withdean and nearby
Withdean is about 2 miles north-west of Brighton, in Brighton and Hove. Book a date that suits you, and you’ll know when to expect us, so there’s no waiting around. We work in all 30 towns and villages in Brighton and Hove, from the larger towns to small villages. Our jobs stretch from Withdean to London (45 miles away).
We cover every part of the BN1 and BN3 postcode area. Whether you live on Home Road, Croft Road and Bates Road or anywhere nearby, we can come to you. Main roads around Withdean include the A23, which makes travel easy. Close by, we cover Preston (1 mile south), Westdene (1 mile north-west), Prestonville (1 mile south), Patcham (1 mile north) and Hollingdean (1 mile south-east). Larger places within reach include Kemptown (3 miles south-east), Whitehawk (3 miles south-east), Saltdean (6 miles south-east), East Saltdean (6 miles south-east), Roedean (3 miles south-east) and Rottingdean (5 miles south-east).
What’s near Withdean
In Withdean, that means homes near St Bernadette's Catholic Primary School, The Sportsman pub and Withdean Park. Also close by are St John the Evangelist's Church (under half a mile south), Varndean College (less than half a mile east) and Dorothy Stringer High School (under half a mile east). Withdean has its own railway station: Preston Park station. Further afield, we also cover the area around Churchill Square (1.9 miles south) and Brighton Transport Museum (0.8 miles south). Not far away are Newmarket Hill and Ladies Mile.
Your questions about bath re-enamelling in Withdean
Is it safe with children and pets around?
On the day, the room should be kept clear of pets and children.
Can a failed resurfacing be redone?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
Can you do more than one item on the same visit?
Of course, and it generally saves money. Just add the extra items to your pictures and we’ll quote them together.
Can I get a quote without a visit?
Generally, yes. A close-up and a wider photo are enough to give a fixed price.
What happens once I’ve sent photos?
We check the damage, the material and your postcode, then reply with a quote.
Is repairing better than replacing?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.
Can you redo someone else’s repair?
Yes, we often do. Removing the old work can add time, and that’s in the quote.
Is there a smell?
Yes, while we’re applying the finish. Ventilation keeps it down, and it fades as the finish cures.
Repairing versus replacing in Withdean
There are times replacing is better: if the bath is cracked through, if you want a different size or shape, or if you’re refitting the whole room anyway. Otherwise, resurfacing usually wins. Our bath re-enamelling starts from £350. A repair is priced on what needs doing, not your postcode. The full price is agreed before you book.
Why us?
- One-year guarantee on every repair
- Technicians who travel to you, UK-wide
- Most jobs done in one visit
- Colour mixed on the day to match
Read our pricing or guide to resurfacing and replacement costs.
What a repair cannot fix
Some jobs are not right for a repair, for example:
- Acrylic that moves when you stand in it
- Damage hidden under a previous coating, until it’s stripped back
- Steel that has corroded right through
Not sure? Send photos and we will give you a straight answer before you book.
Surfaces we repair
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
- Cast iron baths
About our accreditations · Every repair comes with a one-year guarantee.

