Shropshire · England
Bath Re-enamelling for Marchamley homes
Full bath re-enamelling and resurfacing at your home in Marchamley, with a one-year guarantee on every repair.
- Resurfacing from £350
- Wear marks under the taps
- Lots of chips and rust spots
Common problems we fix in Marchamley
Sometimes it’s an earlier resurfacing that has failed, lifting by the plughole or blistering. We strip what’s failing and start again.
The things customers generally mention when they call are:
- Several chips and rust patches
- A dull, rough surface that will not come clean
- Thin, worn enamel in places
- An original cast iron bath that needs restoring
Comparing quotes
- What protection goes down before work starts
- How the colour is matched
- Aftercare advice
- How soon you can use it again
About our bath re-enamelling in Marchamley
Most baths are re-enamelled in a day, and you can use the bath the next day. Nothing is disconnected or removed. Our repair technicians work on cast iron baths, basins & shower trays and Victorian roll-tops, and the jobs we see most are lots of chips and rust spots and an old resurfacing that’s failing.
Your repair is guaranteed for a year, as with every job we do.
- Area
- Marchamley (SY4)
- Region
- Shropshire
- Cover
- 12 months on all our work
- Quotes
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Our work in Marchamley
Marchamley is about 5 miles south-west of Market Drayton, in Shropshire. Jobs in Marchamley are booked in like any other job: a fixed quote from photos, and a technician at your door on the day. Marchamley is one of 433 towns and villages in Shropshire where we work. Our jobs stretch from Marchamley to Birmingham (about 40 miles away).
Our technicians cover all of SY4 and the streets around it. Streets in the area include Long Lane and School Lane. If you are just outside Marchamley, we cover Marchamley Wood (1 mile north), Hodnet (1 mile south-east), Wollerton (2 miles north-east), Mickley (2 miles north-east) and Stoke-on-Tern (3 miles east). We also work in nearby towns such as Shrewsbury (12 miles south-west), Market Drayton (5 miles north-east), Coleham (13 miles south-west), Kingsland (13 miles south-west), Whitchurch (8 miles north-west) and Belle Vue (13 miles south-west).
What’s near Marchamley
Around Marchamley, we work in homes near St Luke's Church and the streets around them. For rail, the closest station is Prees station, about 4.6 miles north-west of the centre. A little further out are Red Castle (1.6 miles west). The countryside around Marchamley includes Hawk Lake.
Prices and what affects them
Prices start from £350. Quotes are free and the price is fixed. What we take into account:
- The material and finish
- The size and number of damaged areas
- Doing more than one item at once
- Whether old repairs or coatings need taking off
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send photos and we’ll give you the exact figure.
Getting a price from photos
Most quotes are done from pictures alone. To help us price it:
- A wider photo showing the whole bath
- A clear, close picture of the problem area
- Natural light rather than flash
- Your postcode, so we can check dates
Most customers in Marchamley get their price from photos. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.
Should I try a DIY kit first?
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Towns and villages near Marchamley
Also in Marchamley
Questions from Marchamley
Do I have to be there?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Is repairing better than replacing?
Normally, if the item is otherwise sound. A repair avoids removal and making good. We will tell you honestly if replacement makes more sense.
Will the new finish last?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.
Can you do more than one item on the same visit?
Yes, and it’s frequently cheaper. Send pictures of everything together and you’ll get one combined price.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Can you re-enamel a roll-top bath?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
What happens if you find more damage?
If we find something the pictures didn’t show, we explain it first. You decide whether to go ahead.
Will you leave a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
When we’d advise against a repair
Not everything can be repaired, and we’d rather say so up front. Repairs will not solve:
- Problems we can’t see until an old finish comes off
- Leaking taps or wastes (a plumber’s job)
- Holes rusted through the metal
Not sure? Send pictures and we’ll give you a straight answer before booking.
Materials we work on in Marchamley
- Acrylic baths
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
What we do, step by step
From the moment we arrive, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the work takes most of the day, depending on what we find, and we finish by cleaning up and talking you through the result.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Let us know about parking or access
- Ensure the area is dry
- Have a window or extractor fan available
How to get a price
Getting a price is easy: snap the damage close up and then the entire item, send them to us with your postcode, and you will get a fixed price back. There is no charge for the quote and no obligation.
Related advice
Keeping it looking good
After the repair has cured, a few habits help it last:
- Rinse off hair dye, oils and bath bombs immediately
- Clean with a soft cloth and mild detergent
- Keep toiletries on a shelf rather than in the bath
- Wipe the bath dry after use in hard water areas
A quick rinse and wipe after use helps, particularly where water is hard, so limescale can’t build up.
Leave a peeling coating alone. Water gets under it and the damage spreads, so have it stripped and resurfaced.
What your bath is made of matters
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is what we repair.
Why repair rather than replace?
Replacing the bath means a plumber, lifting out the old bath, making good the walls and tiles and days without a bathroom. Re-enamelling gives the bath a new finish with the bath left where it is. Our bath re-enamelling starts from £350. We charge the same wherever you are, with no extra for Marchamley. The job itself decides the price: how much damage, what it’s made of and how many items.
What you get with us
- Fixed prices from your photos
- One visit for most repairs
- We leave the room as we found it
- Accredited with CHAS, Constructionline and SafeContractor
See our prices page and resurfacing vs replacement cost guide.
About our accreditations · Every repair comes with a one-year guarantee.
