Telford and Wrekin · England
Bath re-enamelling & resurfacing in Woodside, Telford and Wrekin
Full bath re-enamelling and resurfacing in Woodside, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Lots of chips and rust spots
- An original cast iron bath that needs restoring
Signs you need bath re-enamelling in Woodside
A dull surface stains and holds dirt, and cleaning harder only makes it worse. That is the point where re-enamelling makes sense.
Typical reasons for a call-out include:
- A period or roll-top bath worth keeping
- Several chips and rust patches
- An old resurfacing that’s failing
- A coloured bath you want in white
Before booking anyone
- How your room will be protected
- What aftercare is recommended
- How changes to the job are handled
- How the colour is matched
How we handle bath re-enamelling in Woodside
We re-enamel a lot of period and roll-top baths, which would be difficult and expensive to replace. Doing them in place keeps an original feature. We regularly repair cast iron baths, pressed steel baths and Victorian roll-tops, and people most frequently call us about a roll-top that’s seen better days and staining under the taps and around the waste.
You are covered after we leave: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote.
- Location
- Woodside (TF7, TF8, TF4)
- Region
- Telford and Wrekin
- Cover
- One year on every repair
- Quote
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
How it works
On the day itself, there’s little for you to do. Show us the job, point us to the room, and we will take it from there. Most visits take a full day, tidy-up included.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Tell us about parking, stairs or access
- Make sure the area is dry
- Clear the area around the damage
How to get a price
You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Advice
Woodside and the surrounding area
Woodside is about 1 mile west of Madeley, in Telford and Wrekin. We agree a date that works for you, and we’ll give you an arrival time in advance, so there’s no waiting around. Woodside is one of 79 towns and villages in Telford and Wrekin where we work. Our jobs stretch from Woodside to Birmingham (about 27 miles away).
Postcode districts we cover here: TF7, TF8 and TF4. We regularly work on streets such as Park Lane, School Road and Hollybush Road and the roads around them. You will find Woodside on the A4169, which makes it straightforward to reach. Nearby, we also work in Madeley (1 mile east), Coalbrookdale (1 mile west), Ironbridge (1 mile south-west), Jackfield (1 mile south) and Doseley (1 mile north). Larger places within reach include Telford (4 miles north), Wellington (5 miles north-west), Oakengates (4 miles north), Newport (10 miles north-east), The Rock (3 miles north) and Newdale (3 miles north).
Around Woodside
We visit homes around Church of Holy Trinity, The Beacon Public House and Abraham Darby Academy. Nearby too are Madeley Academy (0.6 miles north-east) and William Reynolds Primary School (within half a mile south). Woodside’s nearest station is Telford Central station, roughly 3.2 miles north-east. Other landmarks nearby include Princess Royal Hospital (5.3 miles north) and Telford Shopping Centre (2.8 miles north). For a walk, there’s The Ercall.
Different materials, different repairs
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. It must be solid and not flex underfoot for the finish to last.
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Steel often rusts by the plughole, so we check it carefully.
Keeping it looking good
To keep it looking its best:
- Get any chip repaired quickly
- A quick wipe after use keeps limescale away
- A dripping tap should be fixed promptly
- Do not leave bottles, razors or sponges standing on the surface
A quick rinse and wipe after use helps, especially in hard water areas, to stop limescale building up.
Worn enamel only gets rougher with time, and any rust spreads underneath. Resurfacing sooner means less repair work first.
Should you replace it?
Getting a cast iron bath out is hard work: they’re heavy, often need breaking up, and a new one is not cheap. Re-enamelling avoids all of it. Resurfacing from £350, with every job priced individually. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
What you get with us
- One price list for the whole UK
- Work done at your home or business
- Typically one visit, start to finish
- We will tell you if it’s not worth repairing
Take a look at our prices page and bath cost comparison.
What affects the price in Woodside
Resurfacing from £350. We charge the same across the UK, including Woodside. The price reflects:
- The size and number of damaged areas
- The material
- Access to the area
- Any earlier repairs that need removing first
Our prices are the same across the UK, so there’s no premium for Woodside. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Send pictures for a quote
Two or three clear pictures are generally enough. It helps if you send:
- The material, if you know it
- Good light, ideally daylight, without flash glare
- A wider photo showing the whole bath
- Where you are, by postcode
A quote takes minutes to ask for: photograph the damage, then the entire bath, add your postcode and send them over. You will get a fixed quote, not an estimate.
DIY kit or professional repair?
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
For landlords and businesses
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Nearby places to Woodside
Other services in Woodside
Your questions about bath re-enamelling in Woodside
Can you do the outside of a roll-top?
Yes. Inside and out.
Is it messy?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Can you repair several things at once?
Yes. Doing several items on one visit generally costs less than separate visits. Send pictures of everything you’d like done.
What information do you need?
Use the quote form or ring 0345 017 0787, and we’ll do the rest.
How long does re-enamelling take?
Generally a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
Is it OK to have pets in the house?
Please keep children and pets out of the room during the visit. The rest of the house is unaffected.
Can you price it without visiting?
Yes, almost always. Clear photos let us give you a fixed price without visiting.
Will the bath be moved?
No. It’s re-enamelled where it stands, so the tiles and taps stay put.
About our accreditations · Every repair comes with a one-year guarantee.
