Wiltshire · England

Bath re-enamelling & resurfacing in Yarnfield, Wiltshire

Bath re-enamelling in Yarnfield without the cost of replacing. Send us pictures for a fixed quote, then we come to you.

  • Resurfacing from £350
  • Thin, worn enamel in places
  • Staining under the taps and around the waste
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling near Yarnfield

DIY kit or professional repair?

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.

It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.

Bath re-enamelling at your home in Yarnfield

If your bath is sound but looks tired, resurfacing is normally the best value. There is no removal, plumbing or tiling involved. We work on Victorian roll-tops, acrylic baths and cast iron baths, and the jobs we see most are lots of chips and rust spots and a coating lifting around the plughole.

Every repair comes with our one-year guarantee, wherever you are in Wiltshire.

Technician in a mask working on a freestanding roll-top bath
Where
Yarnfield (BA12)
Region
Wiltshire
Warranty
One year on every repair
Quotes
From £350. Free, fixed quote from pictures
Call
0345 017 0787
Updated
23 October 2026

What we do, step by step

We turn up at the time we agreed with you and looks over the damage before anything else. Dust sheets and masking tape go down before we open a single tin. Most visits take a full day, and we leave the room as we found it.

  1. The bathroom is protected and ventilation set up.
  2. We remove the old silicone and deep clean the bath.
  3. We repair chips, rust spots and pitting.
  4. The surface is keyed and primed for the new finish.
  5. The new finish is sprayed on in several coats and left to cure.

Preparing for the visit

  • Let us know if it has been repaired before
  • Clear the area around the damage
  • Have a window or extractor fan available

Ask for a price

Pricing is simple: snap the damage close up and then the entire item, send them to us with your postcode, and we’ll reply with a fixed quote. Quotes are free and no obligation.

Get a fixed quote

Read more

What your bath is made of matters

Cast iron

Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.

Roll-top and period baths

We can resurface a roll-top inside and out, and the outside can be refinished too.

Common problems we fix in Yarnfield

Previous coatings can fail too, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.

The things customers usually mention when they call include:

  • A dull, rough surface that will not come clean
  • A roll-top that is seen better days
  • Wear marks under the taps
  • An outdated colour you’d like to change

Questions to ask before booking

  • Whether the price is fixed and includes VAT
  • If travel is included in the price
  • Whether they match the colour on site
  • What aftercare is recommended

Choosing a repair company

Yarnfield and the surrounding area

Yarnfield is about 6 miles south of Frome, in Wiltshire. Whether you’re in the middle of Yarnfield or on the outskirts, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. Yarnfield is one of 425 towns and villages in Wiltshire where we work.

Jobs in BA12 work the same way as everywhere else we cover. Nearby, we also work in Gare Hill (1 mile north), Kilmington (1 mile south), Stourton (3 miles south), Witham Friary (3 miles north-west) and North Brewham (4 miles west). Further out, we also cover Trowbridge (13 miles north), Westbury (10 miles north-east), Warminster (7 miles north-east), Bradford-on-Avon (14 miles north), Paxcroft Mead (14 miles north-east) and Mere (4 miles south-east).

Landmarks near Yarnfield

Our clients here include homes close to Church of St Mary, among other places. Nearby you will also find Mere Castle (3.9 miles south-east). Open spaces near Yarnfield include White Sheet Hill.

Map of Yarnfield © OpenStreetMap contributors

Honest limits

A repair is not always the answer, and we’ll tell you before we start. We can’t fix:

  • A bath that is rusted through
  • An acrylic bath that flexes badly underfoot
  • A cast iron or steel bath that’s cracked right through

If in doubt, send photos and we’ll say what we think.

Materials we repair

  • Acrylic baths
  • Pressed steel baths
  • Victorian roll-tops
  • Basins & shower trays
  • Cast iron baths

Work for landlords and builders

We work for landlords, letting agents and housing providers in Yarnfield as well as homeowners. A repair between tenants keeps the property empty for less time, and it typically costs far less than a refit.

We’re used to working with agents and managing companies. Just send pictures, the address and how to get access and we’ll handle the rest.

Should you replace it?

A replacement frequently means several trades over several days. Re-enamelling is one technician, usually one day, and the bath is usable the day after. Resurfacing from £350, with every job priced individually. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send photos and you’ll get a fixed figure.

Why Yarnfield customers choose us

  • A fixed quote before you book
  • Everything repaired in place
  • Normally one visit, start to finish
  • Colour mixed on the day to match

See our pricing and resurfacing vs replacement cost guide.

How to look after the repair

Most damage we see is avoidable. These habits help:

  • Clean with a soft cloth and mild detergent
  • Rinse off hair dye, oils and bath bombs immediately
  • Leave the bath for the full curing time before using it
  • Don’t leave bottles, razors or sponges standing on the surface

A quick rinse and wipe after use helps, especially in hard water areas, so limescale cannot build up.

The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.

Your questions about bath re-enamelling in Yarnfield

What happens next?

We look at the pictures and reply with a fixed quote and some dates. If we need another angle, we will ask.

Is a repair better than a new one?

Usually, when the rest is in good condition. A repair avoids removal and making good. If replacing would be better, we will say so.

I rent my home. Can I book you?

Yes. Check with your landlord; we can send the quote to them too.

Is it OK to have pets in the house?

On the day, the room should be kept clear of pets and children, mainly so nothing gets touched before it has cured.

Can I get a quote without a visit?

Yes, almost always. Clear photos let us give you a fixed price without visiting.

Is there any odour?

There can be some smell while we work. It clears as the materials cure.

How soon can you come?

That depends on our diary for your area. We’ll offer you dates when we send your quote.

Is there a call-out fee?

There’s no separate call-out charge. Your fixed price includes everything.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.