Walsall · England
Bath Re-enamelling in Yew Tree
Full bath re-enamelling and resurfacing at your home in Yew Tree, with a one-year guarantee on every repair.
- Resurfacing from £350
- A coloured bath you want in white
- An old resurfacing that is failing
Bath re-enamelling in Yew Tree, done in place
Many of the baths we re-enamel are period roll-tops, which would be difficult and expensive to replace. Doing them in place keeps an original feature. We are often asked to fix a bath that stays dull however much you clean it and a peeling or bubbling previous coating, on Victorian roll-tops, acrylic baths and basins & shower trays.
Every repair comes with a one-year guarantee, wherever you are in Walsall.
- Where
- Yew Tree (WS5, B71, WS1)
- County
- Walsall
- Cover
- 12 months on all our work
- Quote
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Should you replace it?
A refit takes several trades and several days. Resurfacing is one technician, normally in a day, and the bath can be used the day after. Our bath re-enamelling starts from £350. There are no surprise extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Why book with us
- Everything repaired in place
- Same prices wherever you are
- Straight answers about what a repair can do
- Typically one visit, start to finish
Take a look at our full price list or resurfacing vs replacement cost guide.
Yew Tree and nearby
Yew Tree is about 2 miles south of Walsall, in Walsall. We travel to customers in Yew Tree, so there is no workshop to go to. We cover 39 places in Walsall. Our nearest city page is Birmingham, about 7 miles away.
Every address in WS5, B71 and WS1 is covered. We regularly work on streets such as Bell Lane, Rowan Road and Broom Road. Neighbouring places we cover include The Delves (1 mile north-west), Bescot (1 mile west), Park Hall (1 mile north-east), Highgate (1 mile north) and Charlemont (1 mile south-west). Larger places within reach include Willenhall (4 miles north-west), Bloxwich (4 miles north), Brownhills (6 miles north), Aldridge (4 miles north-east), Pelsall (5 miles north) and Blakenall Heath (4 miles north).
Near you in Yew Tree
Locally, our jobs take us to homes close to Annunciation Church, Joseph Leckie Academy and The Bell pub, among other places. You will also find Red House Park (1.3 miles south-east) and Yew Tree Primary School (within half a mile east). For rail, the closest station is Tame Bridge Parkway station, roughly 0.7 miles south-west. Other landmarks nearby include Walsall Manor Hospital (2.2 miles north-west) and Walsall Castle (2.3 miles north-west). Green spaces nearby include Gorse Farm Wood and Barr Beacon.
Yew Tree questions
What information do you need?
Use the quote form or ring 0345 017 0787.
Do I have to be there?
Yes. We need access to the room while we work, at a time that suits you.
Can you do the outside of a roll-top?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
Is there a guarantee?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Does the bath have to be removed?
No. It’s re-enamelled where it stands, so nothing else is disturbed.
Is repairing better than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we’ll tell you.
I rent my home. Can I book you?
Yes. Ask your landlord first, and we can send them the quote if that helps.
How much does bath re-enamelling cost in Yew Tree?
Resurfacing from £350. The exact price depends on the damage, so we quote from pictures. You’ll get a fixed figure before booking.
How it works
We agree an arrival time beforehand. On site, it takes a full day for most jobs. We leave the room clean.
- We mask and protect the room and ventilate it.
- The bath is cleaned, degreased and any chips or rust repaired.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- Once cured, normally by the day after, the bath is ready.
Before we arrive
- Open a window if you can
- Tell us about any previous repairs or coatings
- Avoid using the area for a few hours before we arrive
Getting a price
We price from pictures so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.
Read more
Looking after it afterwards
Looking after the surface is easy:
- Keep toiletries on a shelf rather than in the bath
- Dry the bath after use to stop limescale
- Rinse off hair dye, oils and bath bombs right away
- Fix dripping taps quickly
Wipe the bath dry after use where you can, particularly with hard water, and rinse away any product left on the surface.
On a worn bath, rust spots keep spreading and make the job bigger. It’s simpler to resurface before they spread.
Prices and what affects them
Resurfacing from £350. There’s no area surcharge for Yew Tree. What changes the price is:
- How much damage there is
- Previous DIY repairs that have to come out
- The type of damage
- The material
Compared with replacing, repairing typically costs far less, because there’s no removal, plumbing or making good. The quote lists exactly what you’re paying for.
How to get a fixed price
Before you send photos, these tips help us give you a firm price:
- One sharp close-up of the damage
- The postcode, so we can plan the visit
- Whether it’s been repaired or coated before
- Good light, ideally daylight, without flash glare
If you are in Yew Tree and want a price, the easiest route is pictures: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.
Landlords, agents and businesses in Yew Tree
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
What a repair can’t fix
In fairness, there are a few things a repair will not fix:
- Plumbing leaks, which need a plumber
- Acrylic that moves when you stand in it
- Problems we can’t see until an old finish comes off
Not sure? Send photos and we’ll give you a straight answer before you book.
Materials we work on in Yew Tree
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
Also near Yew Tree
What else we do in Yew Tree
DIY repairs versus a professional job
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
What your bath is made of matters
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we pay close attention there.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
About our accreditations · Every repair comes with a one-year guarantee.
