Sandwell · England
Bath Re-enamelling for Bescot homes
Bath re-enamelling across Bescot and nearby, normally in one visit.
- Resurfacing from £350
- An old resurfacing that’s failing
- Brown or grey marks that don’t clean off
Looking after it afterwards
So the finish stays in good condition:
- Get any chip repaired quickly
- Keep toiletries on a shelf rather than in the bath
- Leave the bath for the full curing time before using it
- Clean with a soft cloth and mild detergent
Dry the bath after use if possible, and rinse off any bath products.
On a worn bath, rust spots keep spreading. It’s simpler to resurface before they spread.
Bath re-enamelling at your home in Bescot
Most baths are re-enamelled in a day. Nothing is disconnected or removed. Whether it’s enamel that’s lost its shine and feels rough and lots of chips and rust spots, we can usually put it right.
You are covered for a year from the day of the repair. If anything is not right, ring us and we will come back.
- Location
- Bescot (WS1, WS10, WS2)
- Region
- Sandwell
- Guarantee
- 12 months on all our work
- Quote
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Places near Bescot
What else we do in Bescot
Bescot and the surrounding area
Bescot is about 1 mile north-east of Wednesbury, in Sandwell. Jobs in Bescot are booked in like any other job: a fixed quote from pictures, and a technician at your door on the day. We work in 33 places across Sandwell. You can also see our page for Birmingham, about 8 miles away.
We work across WS1, WS10 and WS2 and the streets around it. From Kent Road, Devon Road and Smith Road or anywhere nearby, a technician can come to you. Bescot is on the M6 and A461, which makes it straightforward to reach. If you are just outside Bescot, we cover Palfrey (1 mile north), The Delves (1 mile east), Caldmore (1 mile north-east), Highgate (1 mile north-east) and Walsall (1 mile north-east). Further out, we also cover Tipton (4 miles south-west), Oldbury (5 miles south), Smethwick (5 miles south), Rowley Regis (5 miles south-west), Reddal Hill (7 miles south-west) and Cradley Heath (7 miles south-west).
Local landmarks in Bescot
We visit homes around Palfrey Junior School, Joseph Leckie Academy and Horse and Jockey pub and the streets around them. Also close by are Wood Green Academy (0.8 miles west), Walsall Arboretum (1.9 miles north-east) and St Mary & All Saints (0.5 miles north). There’s a railway station in Bescot itself: Bescot Stadium station. Nearby you’ll also find New Square (3.1 miles south) and Jerome K Jerome Birthplace Museum (1.2 miles north). For a walk, there is Pouk Hill and Sot's Hole Local Nature Reserve.
Landlords, agents and businesses in Bescot
Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so we keep visits short and tidy. We will fit around changeovers where we can.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
What bath re-enamelling costs
Resurfacing from £350. We give every job a fixed price from pictures. These are the things that affect it:
- Doing more than one item at once
- Previous DIY repairs that have to come out
- The type of damage
- The size and number of damaged areas
Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
How to get a fixed quote
You can normally get a fixed quote without us visiting. To make it quick:
- A picture taken from further back
- Where you are, by postcode
- One sharp close-up of the damage
- Something in shot to show the size
If you are in Bescot and want a price, the easiest route is pictures: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
The process
We work cleanly and quietly, so you can stay at home while we’re there. Protection goes down first, then the job itself takes a full day. At the end we talk you through the curing time and the aftercare.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Preparing for the visit
- Clear toiletries, mats and anything else from around the area
- Have somewhere for us to park nearby if possible
- Let us know which floor the room is on
Getting a price
For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.
Advice
Do you need bath re-enamelling in Bescot?
Once enamel loses its gloss, it stains more easily, and scrubbing it wears it down further. That’s the point where re-enamelling makes sense.
Clients normally contact us about:
- An original cast iron bath that needs restoring
- A bath in a colour that no longer suits
- Brown or grey marks that do not clean off
- Chips and rust in more than one place
What your quote should include
- What the guarantee covers, and for how long
- Whether they match the colour on site
- How your room will be protected
- If travel is included in the price
Your questions about bath re-enamelling in Bescot
Can you make a coloured bath white?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
Is repairing better than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.
Will the new finish last?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
Is it safe with children and pets around?
Keep pets and children away from the work area on the day.
How long will the bath be out of use?
Normally a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
Can you repair several things at once?
Of course, and it usually saves money. Send pictures of everything together and we’ll quote them together.
Do you work in Bescot?
We do. We send a technician to Bescot for every job, with no extra charge for travel.
What happens if you find more damage?
If we find something the photos didn’t show, we explain it first. You decide whether to go ahead.
Repairs by material
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is what we repair.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Can I fix it myself?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.
Should you replace it?
If the bath is sound, re-enamelling is normally much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s also far quicker. Prices start from £350. Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access.
What you get with us
- No need to remove anything
- Technicians who travel to you, UK-wide
- CHAS, Constructionline and SafeContractor accredited
- Generally one visit, start to finish
Read our pricing and bath cost comparison.
About our accreditations · Every repair comes with a one-year guarantee.
