Cumbria · England
Bath Repair for Heversham homes
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Heversham and across Cumbria. Send photos for a free, fixed quote.
- Repairs from £95
- A failed DIY repair that’s discoloured or lifting
- Cracks in an acrylic bath
About our bath repair in Heversham
We see every kind of bath damage: chips from dropped bottles, rust round the plughole, cracks in acrylic and holes from falling tools. All of it is repaired where the bath stands. We work on pressed steel enamel, cast iron enamel and whirlpool & spa baths, and common reasons people get in touch are chips on the rim or sides and damage beneath the taps.
You’re covered for a year from the day of the repair. If anything isn’t right, ring us and we’ll sort it.
- Area
- Heversham (LA7)
- Region
- Cumbria
- Cover
- 12 months on all our work
- Quotes
- From £95. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Honest limits
A repair is not always the answer, and we’ll tell you before we start. Repairs will not solve:
- Metal that has corroded all the way through
- Cracks in acrylic we can’t reach from underneath
- Leaking fittings, which need a plumber
Send us pictures and we will tell you honestly.
What we work on
- Roll-top & freestanding
- Acrylic
- Pressed steel enamel
- Cast iron enamel
- Whirlpool & spa baths
Repair or replace: which is better?
When the bath is otherwise sound, repairing beats replacing. It’s quicker, cheaper and far less disruptive, and the bathroom stays as it is. Where the entire surface is tired, we may suggest re-enamelling instead. Our bath repair starts from £95. Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access.
Why us?
- One price list for the entire UK
- Free fixed quotes from pictures
- Dust sheets down, tidy finish
- We come to you, anywhere in the UK
Take a look at our prices page or guide to resurfacing and replacement costs.
Work for landlords and builders
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Your questions about bath repair in Heversham
When can I have a bath again?
Most baths can be used the next day. We will tell you the exact curing time when we finish.
Can you repair a failed DIY repair?
Yes, we do this often. We strip it out, deal with any rust and repair it again.
How quickly can you book me in?
It depends on the time of year and where you are. Send pictures with your postcode and we will reply with the earliest dates.
Is a bath repair durable?
A properly prepared repair should last a long time, and it’s guaranteed for a year. Gentle cleaning helps.
Can you repair something that’s been repaired before?
Generally, yes. We remove the old repair before doing a new one, so let us know about it.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Can I add another job to the visit?
Of course, and it generally saves money. Just add the extra items to your pictures and we’ll quote them together.
Is the work guaranteed?
All our work carries our one-year guarantee. We’ll explain what it covers when we quote.
The process
A typical visit goes like this: we arrive at the agreed slot, sheet and mask the area around the job, carry out the work and tidy away. Allow a morning or an afternoon. Before we go, we’ll explain how long to leave it and what to avoid for the first few days.
- We clean the area and remove any loose enamel or rust.
- The chip or crack is filled, then sanded level with the bath.
- The colour is mixed on the spot to match your bath.
- We apply the finish coats and polish the repair so it blends in.
- We leave it to cure; you can normally use the bath the following day.
Preparing for the visit
- Let the surface dry out before the visit
- Tell us about parking, stairs or access
- Clear toiletries, mats and anything else from around the area
How to get a price
For a price in Heversham, the easiest route is photos: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Read more
Covering Heversham
Heversham is about 6 miles south of Kendal, in Cumbria. We visit homes and businesses in Heversham and the surrounding area, so there’s no workshop to go to. Our repair technicians cover 438 places in Cumbria, from the larger towns to small villages. Our jobs stretch from Heversham to Manchester (58 miles away).
Here we cover the LA7 postcode area. You’ll find streets such as Woodhouse Lane, Park House Drive and Princes Way, all of which we cover. If you are just outside Heversham, we cover Leasgill (1 mile north-west), Rowell (1 mile east), Ackenthwaite (1 mile south-east), Milnthorpe (1 mile south) and Hincaster (1 mile north-east). Within a short drive, we also cover Kendal (6 miles north), Ulverston (13 miles west), Windermere (11 miles north-west), Grange-over-Sands (7 miles south-west), Ambleside (15 miles north-west) and Bowness-on-Windermere (10 miles north-west).
Around Heversham
Our customers here include homes close to St Peter's Church and Dallam School. The closest station to Heversham is Arnside station, roughly 3.6 miles south-west of the centre. Nearby you’ll also find University Hospitals of Morecambe Bay NHS Foundation Trust (4.6 miles north) and Sizergh Castle (2.9 miles north). The countryside around Heversham includes Clawthorpe Fell and Whitbarrow.
What your bath is made of matters
Acrylic
Acrylic baths are moulded sheet reinforced underneath. They don’t rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s what we repair.
Prices and what affects them
Repairs from £95. We charge the same across the UK, including Heversham. The price reflects:
- Any earlier repairs that need removing first
- Access to the area
- How much damage there is
- What the surface is made of
The price reflects the work involved, not where you live. You’ll see the full price before booking.
Send pictures for a quote
You can take the pictures on your phone, there is no need for anything special. Ensure they show:
- Any earlier repairs or coatings
- A coin beside the damage so we can judge size
- One picture of the entire bath
- What it’s made of, if you know
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
Also near Heversham
What else we do in Heversham
Can I fix it myself?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.
If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
How to look after the repair
After the repair has cured, a few habits help it last:
- Cover the bath during DIY or decorating
- Use a soft cloth and washing-up liquid for everyday cleaning
- Ensure an acrylic bath is firm underfoot
- Don’t leave razors or cans standing in the bath
Give the repair the full curing time we recommend before running a bath. From then on, mild cleaning is all it needs.
A chip on a metal bath shouldn’t be left. Once water reaches the metal, rust begins, and a rust spot is a bigger repair than a clean chip.
About our accreditations · Every repair comes with a one-year guarantee.
